Go Back   Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums > Tech Forums > UK Cable > Cable boxes > Kryptview



Kryptview Discussions on the Kryptview cable boxes.

Reply
 
LinkBack Thread Tools
Old 23-05-09, 09:00 PM   #1 (permalink)
Junior Member
 
Join Date: Nov 2008
Posts: 21
Thanks: 0
Thanked 3 Times in 2 Posts
Default Power problems on my Kryptview Arnet

I've had by Kryptview running for about a year now, but lately whenever I turn the power off at the mains, it won't power back on again until I leave the box alone for about 2 hours.
If I try and plug it back in and turn on straight away, the box remains dead.

This has got really annoying because (after the problem had already started) we've got some new plug adaptors that turn the power fully off if something is left on standby for a while - energy saving plugs.

These aren't the problem because it was happening before we got them.



I'm pretty sure it has something to do with the power board inside the Kryptview itself.

Anyone have any ideas what it may be, and how much it'd be to replace/repair? and also where to take it/order parts?
danlat1415 is offline   Reply With Quote
Old 23-05-09, 09:21 PM   #2 (permalink)
Senior Member
 
yusuf_gaz's Avatar
 
Join Date: Sep 2008
Posts: 1,964
Thanks: 116
Thanked 623 Times in 525 Posts
Default Re: Power problems on my Kryptview Arnet

Hi

Have you opened box up and had a look at the caps on the psu.

Regards
yusuf_gaz is offline   Reply With Quote
Old 23-05-09, 10:37 PM   #3 (permalink)
Technology Forums
 
Join Date: May 2007
Location: Oldham
Posts: 1,081
Thanks: 776
Thanked 318 Times in 230 Posts
Default Re: Power problems on my Kryptview Arnet

I'm pretty sure it has something to do with the power board inside the Kryptview itself.

If your lucky it will be the psu board at fault, if so then easy to repair, if it's the second bigger board thats faulty then not that
easy to locate faults or repair as I stated on one of my other threads, if it's the big board then would be better off buying a new KV.
AJ

Last edited by jambutty; 23-05-09 at 10:40 PM. Reason: spelllinnn
jambutty is offline   Reply With Quote
Old 24-05-09, 11:50 PM   #4 (permalink)
Junior Member
 
Join Date: Nov 2008
Posts: 21
Thanks: 0
Thanked 3 Times in 2 Posts
Default Re: Power problems on my Kryptview Arnet

I've not had a look at the CAPS on the board, as I'm not that technical.

All I know is that if I unplug the power to the box, and try and plug it back in straight away, it doesn't work.
If I leave it for about 2 hours, it works again.

It seems like the box needs time to discharge or something? so hopefully it will be the PSU board.
I'm sending it to Jambutty, so hopefully his expertise will save me fingers crossed.
danlat1415 is offline   Reply With Quote
Old 25-05-09, 12:20 AM   #5 (permalink)
Technology Forums
 
Join Date: May 2007
Location: Oldham
Posts: 1,081
Thanks: 776
Thanked 318 Times in 230 Posts
Default Re: Power problems on my Kryptview Arnet

All I know is that if I unplug the power to the box, and try and plug it back in straight away, it doesn't work.
If I leave it for about 2 hours, it works again.

This info Deffo tells me that there is a faulty Cap, what's happening here is this, it's just like a rechargeble battery, after yer charge them up say 200 times then they just start to degrade in time an won't charge up anymore so yer bin em and buy new ones.
OK Caps are more sturdy and should last 15-20 years or even longer, BUT yer can get a faulty cap and it's lifespan can be like a rechargeble battery and start to degrade after a shorter time than they should.
What's happening here is that when the box is unpluged from the mains, it is simply draining the cap rapidly and not storing a charge for next power in.
Ok yer plug it back in and then it starts being sluggish and taking a long time to put the charge back into it, which it needs to fire up the box.
Hope this helps, but as stated on my other threds please don't pm me for tech advice cos I can't advise without doing test on the psu.

Hope Admin don't mind me putting this on but bottom line is if yer can't mend yer psu as danlat1415 says (he is not technical) then send it over to me and I will repair it within 24 hours.
AJ

Last edited by jambutty; 25-05-09 at 12:22 AM. Reason: spellllllllin
jambutty is offline   Reply With Quote
Reply

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
kryptview arnet ADMIN ATTENTION PLEASE spikebaby Kryptview 129 29-09-09 07:53 PM
Kryptview Arnet mark_macaulay Eurovox 4 10-12-08 10:33 PM
arNet kryptview on eb@y any good? technovice Kryptview 6 06-01-08 04:00 PM
HDTV box problems - dirty power supplies responsible? Analoguesat HDTV 5 17-07-07 10:00 PM
The Power Mac Storage FAQ Apple Mac Apple 0 24-08-06 05:07 PM


All times are GMT +1. The time now is 05:55 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2012, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0 ©2011, Crawlability, Inc.