diablo 2.3 programmer - Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums

aprd68 · 24-05-09, 10:06 AM

hi,with the diablo 2.3 came the cam & also 2 cards & cable, i think the small card is called a J card, can anyone tell me what these 2 cards & cable are used for & any instructions pls
cheers

Mickha · 24-05-09, 10:54 AM

These cards are for your Cas programer, and not needed to program the Diablo Cam.
The larger one is know as a dummy card and is used to program a dragon/t-rex cam, the smaller card is used to program older cams that you will probably never see.
Is the cable just a USB cable used to connect your Cas programmer to your computer?
Have a read through the sticky threads, in the Cams section, including this one:
How to program a Diablo Cam
and then post back with any questions you have.

aprd68 · 25-05-09, 08:37 PM

hi Michka, The cable is not usb but a 20 strand cable & the connectors are 20 pin 2x10 male, the J card & dragon card have corresponding female sockets as has the programmer, there is also a usb connector on the programmer.

cheers

Mickha · 25-05-09, 09:12 PM

The cable is for connecting the J Card, or Dummy card, to the Cas programmer, but as stated it is doubtful if you will ever use them.
If you do it will probably be the dummy card, the larger one, for programming Dragon/T-Rex cams.
All you require to update the Diablo Cam is the USB cable.

24-05-09, 10:06 AM	#1 (permalink)
aprd68 Junior Member Join Date: Aug 2007 Posts: 4 Thanks: 1 Thanked 0 Times in 0 Posts	diablo 2.3 programmer hi,with the diablo 2.3 came the cam & also 2 cards & cable, i think the small card is called a J card, can anyone tell me what these 2 cards & cable are used for & any instructions pls cheers

24-05-09, 10:54 AM	#2 (permalink)
Mickha Super Moderator Join Date: Feb 2006 Posts: 4,799 Thanks: 42 Thanked 1,203 Times in 850 Posts	Re: diablo 2.3 programmer These cards are for your Cas programer, and not needed to program the Diablo Cam. The larger one is know as a dummy card and is used to program a dragon/t-rex cam, the smaller card is used to program older cams that you will probably never see. Is the cable just a USB cable used to connect your Cas programmer to your computer? Have a read through the sticky threads, in the Cams section, including this one: How to program a Diablo Cam and then post back with any questions you have.

25-05-09, 08:37 PM	#3 (permalink)
aprd68 Junior Member Join Date: Aug 2007 Posts: 4 Thanks: 1 Thanked 0 Times in 0 Posts	Re: diablo 2.3 programmer hi Michka, The cable is not usb but a 20 strand cable & the connectors are 20 pin 2x10 male, the J card & dragon card have corresponding female sockets as has the programmer, there is also a usb connector on the programmer. cheers

25-05-09, 09:12 PM	#4 (permalink)
Mickha Super Moderator Join Date: Feb 2006 Posts: 4,799 Thanks: 42 Thanked 1,203 Times in 850 Posts	Re: diablo 2.3 programmer The cable is for connecting the J Card, or Dummy card, to the Cas programmer, but as stated it is doubtful if you will ever use them. If you do it will probably be the dummy card, the larger one, for programming Dragon/T-Rex cams. All you require to update the Diablo Cam is the USB cable.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Build your own 256 spi programmer	matthew4321	Cable Modems	9	17-03-10 09:02 AM
Diablo 2.3 vs Softcams	dj991	Satellite Help	2	30-03-09 08:49 PM
diablo 2.3	wazza_2	Diablo/ Diablo2 Cam	7	18-02-09 01:16 AM
diablo cam 2.2upgrade to 2.3 with Cas2	atiq	Diablo/ Diablo2 Cam	4	15-12-08 08:55 PM
Help with diablo 2.3	wallace1	Diablo/ Diablo2 Cam	1	01-12-08 10:46 PM