eurovox 2006 blue not responding - Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums

Cal970 · 26-05-09, 09:47 PM

Hi, my 2006 blue will only switch on and off and only show channel 0001 but nothing on tv.
I have tried to Re-flash several times but still not working.
first problem noticed was the red lock light showing, tried unplugging but numbers on front i thing showed 7634.
has it lived its life?
can anyone advise if there is a way to reset without going into the menu as nothing works?
Thanks Carl

smoggy · 27-05-09, 09:57 AM

it looks like you have lost the scart output

disconnect your scart
connect some coax cable from the TV / VCR socket of the eurovox to the TV
tune your telly to the VCR channel where you will get the 'enter pin' screen
using your remote enter the master pin which is 1004.
go to menu and clear data, then do a factory reset.
plug your scart back in and do a powerscan as normal or reflash the box

Cal970 · 27-05-09, 07:19 PM

thanks smoggy

I'll give it a go.

Cal970 · 28-05-09, 12:42 AM

Hi Smoggy

worked a treat thanks for your help really appreciated.

one question since i have updated to the april 2008 firmware i am not able to choose between normal or power scan it is automatically showing power scan when i press the yellow button, if i ok it the box does start scanning but only for about 20 second and doen't find anymore channels.

you got any idea's. i did install te latest firmware 11/08 on thursday and it stopped working on monday so a little reluctant to retry.

cheers again Carl

Smurf · 28-05-09, 02:36 AM

Hi carl, just re-flash with latest firmware. You will be ok. Should u have same kinda problems bring it back 2 life like u just did. It will save u entering codes all the time. Also make sure u using the right fix for ur box. Re-download from downloads section. Good luck.

smoggy · 28-05-09, 11:19 AM

glad to see your sorted

as smurf says flash with the latest firmware (april is out of date)

the latest firmware is dated 30/11/08 for genuine boxes
I would use the clonesafe version dated 11/12/08 this is OK for genuine and clones.

26-05-09, 09:47 PM	#1 (permalink)
Cal970 Junior Member Join Date: Apr 2008 Location: Birmingham Posts: 7 Thanks: 4 Thanked 0 Times in 0 Posts	eurovox 2006 blue not responding Hi, my 2006 blue will only switch on and off and only show channel 0001 but nothing on tv. I have tried to Re-flash several times but still not working. first problem noticed was the red lock light showing, tried unplugging but numbers on front i thing showed 7634. has it lived its life? can anyone advise if there is a way to reset without going into the menu as nothing works? Thanks Carl

27-05-09, 09:57 AM	#2 (permalink)
smoggy Senior Member Join Date: Apr 2008 Location: North East England Posts: 2,780 Thanks: 240 Thanked 882 Times in 792 Posts	Re: eurovox 2006 blue not responding it looks like you have lost the scart output disconnect your scart connect some coax cable from the TV / VCR socket of the eurovox to the TV tune your telly to the VCR channel where you will get the 'enter pin' screen using your remote enter the master pin which is 1004. go to menu and clear data, then do a factory reset. plug your scart back in and do a powerscan as normal or reflash the box

27-05-09, 07:19 PM	#3 (permalink)
Cal970 Junior Member Join Date: Apr 2008 Location: Birmingham Posts: 7 Thanks: 4 Thanked 0 Times in 0 Posts	Re: eurovox 2006 blue not responding thanks smoggy I'll give it a go.

28-05-09, 12:42 AM	#4 (permalink)
Cal970 Junior Member Join Date: Apr 2008 Location: Birmingham Posts: 7 Thanks: 4 Thanked 0 Times in 0 Posts	Re: eurovox 2006 blue not responding Hi Smoggy worked a treat thanks for your help really appreciated. one question since i have updated to the april 2008 firmware i am not able to choose between normal or power scan it is automatically showing power scan when i press the yellow button, if i ok it the box does start scanning but only for about 20 second and doen't find anymore channels. you got any idea's. i did install te latest firmware 11/08 on thursday and it stopped working on monday so a little reluctant to retry. cheers again Carl

28-05-09, 02:36 AM	#5 (permalink)
Smurf Senior Member Join Date: May 2008 Location: Midlands Posts: 1,220 Thanks: 131 Thanked 179 Times in 164 Posts	Re: eurovox 2006 blue not responding Hi carl, just re-flash with latest firmware. You will be ok. Should u have same kinda problems bring it back 2 life like u just did. It will save u entering codes all the time. Also make sure u using the right fix for ur box. Re-download from downloads section. Good luck. Last edited by Smurf; 28-05-09 at 02:40 AM.

28-05-09, 11:19 AM	#6 (permalink)
smoggy Senior Member Join Date: Apr 2008 Location: North East England Posts: 2,780 Thanks: 240 Thanked 882 Times in 792 Posts	Re: eurovox 2006 blue not responding glad to see your sorted as smurf says flash with the latest firmware (april is out of date) the latest firmware is dated 30/11/08 for genuine boxes I would use the clonesafe version dated 11/12/08 this is OK for genuine and clones.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Eurovox Max 2006 Blue stuck on standby	Jonah1984	Eurovox	0	17-08-08 10:10 PM
Blue Eurovox 2006 no audio	timar	Eurovox	2	21-07-08 08:27 PM
Eurovox Blue and Eurovox Red	lisa bc	Eurovox	9	07-05-08 06:27 PM
eurovox blue problem	sec221	Eurovox	4	13-04-08 10:31 PM
Eurovox max 2006...help help help	smoothsam	Eurovox	7	28-12-07 06:52 PM