converting ntl box to tw - Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums

shaks08 · 31-05-09, 10:13 AM

is it possible to convert an ntl box to tw by willem programmer such as changing the info on the chips or by any other way. talking about any of the pace boxes.

ouzi1212 · 31-05-09, 11:28 AM

what do you mean?
if ur in tw area then u can only use box that will work on tw, if ur on pure ntl then u can use box that will work on ntl area.

you can change the netid of the box to make it work on different area but some boxes will only specific area.

The sammy 2110c model works on all areas cw, tw and ntl area.
so you will just need to change the netid of the box for it to work on different areas. You dont need a willem prog, just a funcard and card programmer.

shaks08 · 31-05-09, 11:46 AM

Hi, what i meant was that say its a 4001n, i know that its for NTL area only but can i convert this somehow to make it work in tw area, such as changing the info on the atmels, im askin coz iv read in forums something bout tw dumps etc.. so i thought this was to do with changing the firmware frm ntl to tw or vice versa. Iv purchased the willem prog for reading bk for pace 2000 but i thought i'l go a step further if its possible.

ouzi1212 · 31-05-09, 12:39 PM

No the 4001 will not work on tw or cw. You need to read the two tsop 48 pin each atmels using the willem prog to read the bk.

2000 isnt an easy box to mod. Its best to get 1000t or 4000t, the normal pace 1000 will work on tw area because of the 3.6 update these much more easer to get the bk.

31-05-09, 10:13 AM	#1 (permalink)
shaks08 Junior Member Join Date: May 2009 Posts: 13 Thanks: 2 Thanked 0 Times in 0 Posts	converting ntl box to tw is it possible to convert an ntl box to tw by willem programmer such as changing the info on the chips or by any other way. talking about any of the pace boxes.

31-05-09, 11:28 AM	#2 (permalink)
ouzi1212 Just A Member! Join Date: Mar 2008 Posts: 1,059 Thanks: 7 Thanked 212 Times in 208 Posts	Re: converting ntl box to tw what do you mean? if ur in tw area then u can only use box that will work on tw, if ur on pure ntl then u can use box that will work on ntl area. you can change the netid of the box to make it work on different area but some boxes will only specific area. The sammy 2110c model works on all areas cw, tw and ntl area. so you will just need to change the netid of the box for it to work on different areas. You dont need a willem prog, just a funcard and card programmer. Last edited by ouzi1212; 31-05-09 at 11:35 AM.

31-05-09, 11:46 AM	#3 (permalink)
shaks08 Junior Member Join Date: May 2009 Posts: 13 Thanks: 2 Thanked 0 Times in 0 Posts	Re: converting ntl box to tw Hi, what i meant was that say its a 4001n, i know that its for NTL area only but can i convert this somehow to make it work in tw area, such as changing the info on the atmels, im askin coz iv read in forums something bout tw dumps etc.. so i thought this was to do with changing the firmware frm ntl to tw or vice versa. Iv purchased the willem prog for reading bk for pace 2000 but i thought i'l go a step further if its possible.

31-05-09, 12:39 PM	#4 (permalink)
ouzi1212 Just A Member! Join Date: Mar 2008 Posts: 1,059 Thanks: 7 Thanked 212 Times in 208 Posts	Re: converting ntl box to tw No the 4001 will not work on tw or cw. You need to read the two tsop 48 pin each atmels using the willem prog to read the bk. 2000 isnt an easy box to mod. Its best to get 1000t or 4000t, the normal pace 1000 will work on tw area because of the 3.6 update these much more easer to get the bk.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Keep Virmin box online!!	stuckwithsky	Eurovox	10	19-03-10 06:04 PM
Configs/Tftp Ip Database	matthew4321	Cable Modems	265	06-08-09 10:05 AM
How to chip ntl box	meyourmaster	Introduce yourself	1	21-01-09 06:21 PM
Pace NTL box - how to update?	sneakyg	Cable TV Chat	2	28-11-08 02:33 AM