Sa 4200 net id - Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums

Av_Dave · 12-06-09, 10:44 AM

Hi, I have just done my first sa 4200, (only ever done pace before) i have my mosc, the bit i am stuck on is how can set the net id and pin, after a bit of reading i understand you can use a fun card like the pace, but you have to lift a chip, is there a tut of which chip it is and how you go about it.

So close but so far with this one,

Thanks again

G77 · 12-06-09, 10:52 AM

yeah, there is a tut but basically its chip 2007.

there are two 512's on the underside of the board, its the one of these. you need to blank it, same as you do with a v+.

note, these boxes will only work in telewest. they will not work in c+w. not sure about pure but i doubt it.

Av_Dave · 12-06-09, 11:02 AM

Thanks for that are these soldered on? With out sounding stupid how do you blank these chips.

G77 · 12-06-09, 11:07 AM

yeah there soldered on.

you would blank them with a willem/wellon/512 programmer

or, you could just buy a blank chip from cartman for a few quid.

Stonedbios · 02-07-09, 05:50 PM

So you have to blank on of the 512 then gl**tch a card with the net id and bk on ??

G77 · 02-07-09, 05:57 PM

yeah, you do

12-06-09, 10:44 AM	#1 (permalink)
Av_Dave Member Join Date: Mar 2009 Posts: 70 Thanks: 19 Thanked 1 Time in 1 Post	Sa 4200 net id Hi, I have just done my first sa 4200, (only ever done pace before) i have my mosc, the bit i am stuck on is how can set the net id and pin, after a bit of reading i understand you can use a fun card like the pace, but you have to lift a chip, is there a tut of which chip it is and how you go about it. So close but so far with this one, Thanks again

12-06-09, 10:52 AM	#2 (permalink)
G77 Super Moderator Join Date: May 2008 Posts: 6,080 Thanks: 695 Thanked 1,248 Times in 1,042 Posts	Re: Sa 4200 net id yeah, there is a tut but basically its chip 2007. there are two 512's on the underside of the board, its the one of these. you need to blank it, same as you do with a v+. note, these boxes will only work in telewest. they will not work in c+w. not sure about pure but i doubt it. __________________ 1M Motorised Dish, 45W-36E, DM800HD. Quad LNB Mesh Mini Dish, 28.2E, DM500, TM500. Samsung Galaxy S GT-I9000 XXJVU & CF-Root.

12-06-09, 11:02 AM	#3 (permalink)
Av_Dave Member Join Date: Mar 2009 Posts: 70 Thanks: 19 Thanked 1 Time in 1 Post	Re: Sa 4200 net id Thanks for that are these soldered on? With out sounding stupid how do you blank these chips.

12-06-09, 11:07 AM	#4 (permalink)
G77 Super Moderator Join Date: May 2008 Posts: 6,080 Thanks: 695 Thanked 1,248 Times in 1,042 Posts	Re: Sa 4200 net id yeah there soldered on. you would blank them with a willem/wellon/512 programmer or, you could just buy a blank chip from cartman for a few quid. __________________ 1M Motorised Dish, 45W-36E, DM800HD. Quad LNB Mesh Mini Dish, 28.2E, DM500, TM500. Samsung Galaxy S GT-I9000 XXJVU & CF-Root.

02-07-09, 05:50 PM	#5 (permalink)
Stonedbios Junior Member Join Date: Jan 2009 Posts: 10 Thanks: 0 Thanked 0 Times in 0 Posts	Re: Sa 4200 net id So you have to blank on of the 512 then gl**tch a card with the net id and bk on ??

02-07-09, 05:57 PM	#6 (permalink)
G77 Super Moderator Join Date: May 2008 Posts: 6,080 Thanks: 695 Thanked 1,248 Times in 1,042 Posts	Re: Sa 4200 net id yeah, you do __________________ 1M Motorised Dish, 45W-36E, DM800HD. Quad LNB Mesh Mini Dish, 28.2E, DM500, TM500. Samsung Galaxy S GT-I9000 XXJVU & CF-Root.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
can i set my net id useing ocd??? sami 2100c	matthew4321	Cable TV Chat	3	29-09-09 09:35 PM
Not sure of my Net ID	noassetts	Other Cable Boxes	3	22-05-09 12:17 AM
change net id for di4000n	vicz84	Cable TV Chat	5	12-05-09 08:01 PM
Resetting Net ID for funcard	kimigonzales	Other Cable Boxes	3	01-03-09 10:37 PM
V+ HD Net ID Problems	blakey_8	Cable TV Chat	7	04-02-09 05:18 PM