Any Infinite users still active???

[AciidSn3ak3r]

Im still running Infinite and have been with a 20mb mac for about 1 month, would of been about 4 months if i didnt have the downtime from a crap signal. Bought a booster and back up with the same Mac.
Inface ive had this mac for about 6ish months.

[Moyt]

Cooool so the infinite fanbase is still strong lol. Good to hear

Originally Posted by cockneysean

Hax is a great deal simpler than Infinite!!

Ah maybe I should have said I just prefer to use infinite over haxorware. Why??? I dunno I'm just crazy

No really I had trouble even sync'n the modem with haxorware last time when I decided to upgrade (I had followed the guides that were around as well).

Maybe I'll have better luck this time around, once I find some quality spare time to have another look at it.

[50pounds]

Try runnin Infinite with IE 8 lmao i do use firefox my self but somtimes even that dont work right

[anthrax]

yes m8, all my infintes are all good, just seems to be when modem gets new lease gets kicked, just alwasy spoof your nic mac to -1 of your new mac, without cable feed , reconnect should be all good for another week or two, always working for me, apart from when all the mad hits were happaning , though been all good for past few weeks or more!!! same with the hax all good also........just do same

[racky29]

what about trying the new SB5101 Sigma.X2 build-125 for (BCM3349-modems)

it is very basic, but allows mac change and a few other fuctions
----------------------------------------------------------------------------
[SIGMA-X2 Build 125 BETA for BCM3349][FIXED VERSION]
A DOCSIS 2.0 Modification for the SB5101 cable modem

NOTICE: THIS FIRMWARE IS FOR THE SB5101 CABLE MODEM ONLY. (not true it does work on other bcm3349 modems)

Features:
* Self-Extracting binary (no bootloader required!)
* In stream core, no system memory used.
* HFC MAC and Serial changer
* Embedded console / Telnet server
* Factory Mode (Enable/Disable)
* Config File Changer
* Firmware updater (improved!)
* NEW: HTTP now has an opperating status!

NOTE: This is confirmed to work on WebSTAR EPC2100
but Must Not Be Loaded via the Serial (max232) Port
Load it via the ethernet method using these commands and a Tftp server
modem must have a previous shelled firm, infinite, 5101 diagnostic or haxorware, this method can be used with sb5101 and webstar 2100
cd /ip
dload -i 1 -l -f 192.168.100.10 sigma.bin
y
cd /
reset

Works on SB5101, scientific atlanta WebSTAR EPC2100
and probably 250 and rca modems too, but need futher testing

pack includes:
a tcniso bootloader (unknown, not tested it personally)
1mb firmware
2mb Full Dump (for SB5101)
2mb WebSTAR EPC2100 Full Dump (makes life easy, stops bricking)
picture of console
and readme

enjoy
__________________________________________________ ______________________
loading sigmaX2_125 via serial to a sb5101 is ok, but loading via serial to a webstar epc2100 can cause failiure, so use the epc2100 2mb dump

i suggest upgrading from a firmware that has telnet enabled like infinite, 5101 diagnostic, or haxorware, or similar
------------------------------------------------------------------------------------------
Upgrading from previous shelled firmware (infinite), 5101 diag or Haxorware

Set your computers ip to 192.168.100.10
Set up a TFTP server with Sigma.bin in its root
Connect to modem with hyperterminal or telnet to the IP 192.168.100.1
Enter your username and password if required, then type in commands
----------------------------------------
if you need to Stop Scanning Frequency
----------------------------------------
cd docsis_ctl
scan_stop
cd /

or

cd cm_hal
scan_stop
cd /
-----------------------------------------------------------------------------
scanning should have stopped, now carry on with the rest of these commands
-----------------------------------------------------------------------------
cd /ip
ipconfig 1 release
y
dload -i 1 -l -f 192.168.100.10 sigma.bin
y
cd /
reset
now your sigma should boot up, check the webpage 192.168.100.1
---------------------------------------------------------------------

____________________________________
HERES A LINK TO Fixed no licence version:
__________________________________________________ ______________________
SB5101-SIGMA-X2_Build125_Dumps_[bcm3349][FIXED].rar (3.73 MB)

http://www.fileden.com/getfile.php?file_path=http://www.fileden.com/files/2008/10/22/2155170/SB5101-SIGMA-X2_Build125_Dumps_%5Bbcm3349%5D%5BFIXED%5D.rar

-------------------------------------------------------------------

-------------------------------------------------------------------

[ctsw2001]

Being someone who's only capable of using a step by step guide, what do I need to do to get my Ambit 255 back up and running, which was working fine with infinity before all this crap happened. Is a case of just updating the config file, and will my sniffed mac still be good to use ?

[G77]

make of it what you will but i think that firmware has little to do with whats been happening.

its a frequency/config/mac issue

[sr20]

Originally Posted by G77

make of it what you will but i think that firmware has little to do with whats been happening.

its a frequency/config/mac issue

As you know i've done a fair bit of messing with firmware non-vol / spoofing in the past so i'm going to be biased on this but..

Currently running a 250 with infinite using all of the MACS which got knocked off after 10ish mins using previous modded Haxorware.

This is in Pure / static.

Current: Infinite stealth 00:0E MAC with BPI enabled and software update values spoofed for a 250. 20MEG forced (rts22-nb) on a rts98 MAC.

Doesn't mean it'll work for you, just an observation!

sr20

[G77]

ambit 255 on hax 31, autoserving custom config with no auth string without tftp bypass, new freq, no bpi, no spoofing of software version

modem maxes out at 42mbit a sec and just short of 3 mbit up

[sr20]

Lucky bastard

I can't try it properly from here. Although I can see how it may work from the sparseness of the -b configs (with suitable MAC) on the new docsis1.1 frequencies, I can't lock the DS on any of them.

Even the sub is on the rescue frequency

Tehcnically it shouldn't work, it's not like it's impossible for VM to make a config error.


sr20