Wifi cam problems!

[parpaneata]

Hi!
I have a 2.3 wifi cam with 2 card reader and cas 3 plus.
My last uw file loaded was 1.80. Something was wrong with cs and I tried to format cam. First time error but second time was a succes. For that time....nothing!! When I try to format="please wait" and then "error to connect to diablocam".
When I try to restore backup file the error message is "cam not error"! I tried to backup original files and backup files created by others. Same thing. Sometimes 30% was loading and....the same "cam not error".
When I try to upgrade the cam with any version of UW the message are:
"wait for diablocam connection"
"write data addr"...works because is loading 30%(uw 1.80)
and than..."Writing Data to Flash ... Please wait.
DIABLOCAM Flash written successfully
Waiting for Filesystem update ...
Operation error".
Thanks for any advice!
What else can I try?
The pins are ok! I notice the flashing lights are not ok. Only the red one and the yellow one are flashing. No green flashing!!

[Mickha]

The yellow light should be nearly constant, during formatting, it only flashes when the cam is being detected.
Equally you should have 2 constant green lights, one at the front, next to the yellow light, and one at the back, for the card reader.
The fact that you're not getting these makes me think that perhaps your Cas 3+ isn't working correctly, try changing the USB port, and cable, to see if this improves things.
It could also be that the cam is not quite connected correctly, you can try jiggling the cam gently to see if you can get a proper connection or you can try removing the plastic case, gently inserting your cam, and then try programming, to check if the casing is causing the cam to not connect properly.
Are you using the latest CIS software?

[parpaneata]

I did everything Mickha. Change cable,reinstall cis 8.6c,tested with another computer....same errors. I clean up the pins with a special spray for electronic things and contacts,I also removed that plastic case but nothing!

[Mickha]

Have you got any other cams you can try in the Cas 3, just to see where the problem lies?
Did you buy both the Cas 3+ and the Diablo Wi Fi in a package deal?
The only way to test it out is by trying another Diablo Wi Fi, in your Cas 3+, and trying your Diablo in another Cas 3 programmer, as you seem to have tried everything else.
Unfortunately the only way to do this is to return your products to your supplier, unless there's a satellite shop nearby or you know someone else with a Cas programmer.

[parpaneata]

I did buy the light cam and cas 3+ package. The wifi came later. I'll test tomorow the light cam with my cas. I sold the light cam to one of my friends. The only cas....is mine. I'm shure the cas is ok. I'll know tomorrow for shure and I'll write here.
Thanks.

[parpaneata]

I did check the cas with a light cam. The cas is working good. It seems the cam is broken. I send it back to my supplier.