unlocker an softjtag hell - Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums

mytrac · 14-06-09, 10:29 PM

Hi guys quite new to modems but am having big probs formatted computer cause thought it was prob , now got net 2 ocx and all other files needed registered ocx in reg , when i try to run exploit saying dump error 8012 an jtag not interested tried all three versions been at this a week now with no success at all ps using 250/255 pls help have used various delays also. Can read modem in hyper so think 232 ok

/24 · 14-06-09, 11:21 PM

when you use console unlocker have you got an ethernet cable connected? and your nic's ip address set to 192.168.100.10? If yes once you get the console should now be active if you close console unlocker and open up hyper terminal and hit enter a couple of times do you get the CM> prompt?

mytrac · 14-06-09, 11:33 PM

all IP settings right whem i start hyper and plug in modem get cm run thru to made by alex

mytrac · 14-06-09, 11:38 PM

sorry misread you, have not tried his as have only tried jtag

blakey_8 · 15-06-09, 12:58 AM

You need the ethernet cable connected as well with the IP setting as follows:

IP Address: 192.168.100.10
Subnet Mask: 255.255.255.0 (this will appear automatically once you click it)
Default Gateway: 192.168.100.1

Read the tutorial that comes with the Console Unlocker download mate. Also, you say you have .NET Framework installed and the OCX files in the correct folders? Did you also install the Visual J# 2.0 Redistributable Package - SE?

mytrac · 15-06-09, 09:35 AM

Thanx but everything in place have read tuts printed them off and followed to a T but still no joy have now tried opening hyper and pressing enter a few times and nothing , reboot modem and alex firmware runs ?????

mytrac · 15-06-09, 09:50 AM

does 232 need to be flashed and if so could I do it what would be needed ?????

G77 · 15-06-09, 09:54 AM

Quote:

Originally Posted by mytrac

does 232 need to be flashed and if so could I do it what would be needed ?????

no, thats what a max is, the chip is a driver chip itself so no, it doesn't need flashing.

mytrac · 15-06-09, 10:08 AM

I am baffled then ???????

mytrac · 15-06-09, 10:30 AM

Any other reasons unlocker wont work ??????

14-06-09, 10:29 PM	#1 (permalink)
mytrac Member Join Date: Feb 2009 Posts: 49 Thanks: 27 Thanked 0 Times in 0 Posts	unlocker an softjtag hell Hi guys quite new to modems but am having big probs formatted computer cause thought it was prob , now got net 2 ocx and all other files needed registered ocx in reg , when i try to run exploit saying dump error 8012 an jtag not interested tried all three versions been at this a week now with no success at all ps using 250/255 pls help have used various delays also. Can read modem in hyper so think 232 ok Last edited by mytrac; 14-06-09 at 10:38 PM.

14-06-09, 11:21 PM	#2 (permalink)
/24 Senior Member Join Date: Apr 2009 Posts: 417 Thanks: 39 Thanked 94 Times in 82 Posts	Re: unlocker an softjtag hell when you use console unlocker have you got an ethernet cable connected? and your nic's ip address set to 192.168.100.10? If yes once you get the console should now be active if you close console unlocker and open up hyper terminal and hit enter a couple of times do you get the CM> prompt?

14-06-09, 11:33 PM	#3 (permalink)
mytrac Member Join Date: Feb 2009 Posts: 49 Thanks: 27 Thanked 0 Times in 0 Posts	Re: unlocker an softjtag hell all IP settings right whem i start hyper and plug in modem get cm run thru to made by alex

14-06-09, 11:38 PM	#4 (permalink)
mytrac Member Join Date: Feb 2009 Posts: 49 Thanks: 27 Thanked 0 Times in 0 Posts	Re: unlocker an softjtag hell sorry misread you, have not tried his as have only tried jtag

15-06-09, 12:58 AM	#5 (permalink)
blakey_8 Senior Member Join Date: Apr 2008 Location: Colne, Lancashire Posts: 6,946 Thanks: 245 Thanked 1,311 Times in 1,204 Posts	Re: unlocker an softjtag hell You need the ethernet cable connected as well with the IP setting as follows: IP Address: 192.168.100.10 Subnet Mask: 255.255.255.0 (this will appear automatically once you click it) Default Gateway: 192.168.100.1 Read the tutorial that comes with the Console Unlocker download mate. Also, you say you have .NET Framework installed and the OCX files in the correct folders? Did you also install the Visual J# 2.0 Redistributable Package - SE?

15-06-09, 09:35 AM	#6 (permalink)
mytrac Member Join Date: Feb 2009 Posts: 49 Thanks: 27 Thanked 0 Times in 0 Posts	Re: unlocker an softjtag hell Thanx but everything in place have read tuts printed them off and followed to a T but still no joy have now tried opening hyper and pressing enter a few times and nothing , reboot modem and alex firmware runs ?????

15-06-09, 09:50 AM	#7 (permalink)
mytrac Member Join Date: Feb 2009 Posts: 49 Thanks: 27 Thanked 0 Times in 0 Posts	Re: unlocker an softjtag hell does 232 need to be flashed and if so could I do it what would be needed ?????

15-06-09, 10:08 AM	#9 (permalink)
mytrac Member Join Date: Feb 2009 Posts: 49 Thanks: 27 Thanked 0 Times in 0 Posts	Re: unlocker an softjtag hell I am baffled then ???????

15-06-09, 10:30 AM	#10 (permalink)
mytrac Member Join Date: Feb 2009 Posts: 49 Thanks: 27 Thanked 0 Times in 0 Posts	Re: unlocker an softjtag hell Any other reasons unlocker wont work ??????

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Universal SIM Lock Remover	Realist	Unlocking	2	12-05-10 03:34 PM
Console Unlocker & SoftJTag	birch1983	Cable Modems	8	27-03-09 07:15 PM
Ref: Console Unlocker & SoftJTAG programme	homeoffice	Cable Modems	3	19-03-09 05:01 PM
Console Unlocker step by step guide	TechWreck	Cable Modems	6	08-01-09 09:53 AM
Unlocker	bbalegere	PC Software	1	13-04-06 12:58 AM