help fun2 programming using cas 3 plus programmer

[boxer29]

hi ,ive got the bk and ird ,
i connect my cas 3 programmer and select card programing ,
i use toxic to make my eeprom ,,by using the bk and ird ,,i do put the bk strating forward not backwards ,,i mean starting with 12 ,and then tich the nthell and then save ,,the file is saved in .bin ..do i use hexbin convertor to convert it to hex or not ,,
i also use the flash file for pure and save it as my flah.hex ,,
then open them from the location usnig the links in card programmer ,,
then if write to the card the flash file first and then trying to write the eeprm it say flash file will be deleted . do i have to put the eeprom file first to the card then flash ,,or it doesnt matter the other way around
after i programme card when i put it back it says card is not insertetd properly contact vm ,and i have to press the selcect button for the message to go away ,,i can get channel 1-5 and other FTA channels ,but when i change the channel that message comes again
it says 1007 message at the bottom ,,
what am i doing wrong here ,,
thanks

[Tee_111]

Thats incorrect...

Right the exteep first then the flash file...

[yusuf_gaz]

Hi

Dont know if Im misreading and not understanding you put the ird forwards starting with 12 thats your ird and not bk then put your bk in also put in your camid relavent to your area starting with 1st 2 digits and make rest of digits up using combo of letters and numbers.

Eg: Pure 24 ** ** **
Excw 27 ** ** **
Tw 2C ** ** **

Click radio tab at bottom relevant to your area and save as your exteep.

Load up proggy software erase card a couple of times load up flash and exteep in relevant places nothing in inteep and as said above write exteep 1st then your flash.

Dont know if your proggy is capable of writing in bin format so may need to convert to hex otherwise no need.

Regards

[boxer29]

thanks
yes its my mistake i meant to say ird forward with toxic should i open a file .bin given in the chaos,,or just open toxic and fill in the blanks and tick my area and save it ,,as .bin and then put it in eepom
,,i tried the files from chaox
when i try to put the .bin file it says file too big ,,how big the file has to be ,,i mean in kb i am also using the flash files given in chaos
so i dont put in the codes or do i ,,i will try to do an au fun2 ,with chaos for my area ,with toxic
why is it giving me the message you wont be able to watch all the channels contact vm on 150 and gave me and error messgae 1007 at the botttom right ,have to press select to make that go when change channel the message comes again ,,is it because of the cam id
that box was done by a trader for my friend ,the middle green light at the fornt is off ,,ive heard that if its solid you should be worried as t/b is not cut is it being off ok ,,is there any other say of checking that t/b is cut apart from opening the box and having a physical check ,,its a pace 4001 box

should i do anything else
i am using a cas 3 plus programmer and cas interfarce the latest software with it ,,
thanks

[abbs2002]

I think you would need to do more reading as it become clearer, sence you can get you free channels all you need to do is program, your viewing card.
To do your viewing (funcard) open toxic 7 and make your exteep input you box BK, IRD forward, Cam ID 24 make up the last 6 numbers that comes after the 24, public keys and click your area (pure) then click save, you will need to pass it over the swabbin to get the hex file for the programming.
Insert the card in the card in programmer slot, erase it a couple of times then Load you exteep.hex and click write when you get the message saying done click on it then load flash for your area and click on write when you get message saying done click on it and there you go, if you all your details were correct that should do it, go to BBC 1, number 101 message on the scree appears insert the card and it should desapear if you done it correct, then wait 5 minuts then go to channel 517 and enjoy the latest sport news m8...

[boxer29]

IVE DONE that ,,but when i try to put my exeep.bin file in the card via the programmer it says file too big for the card ,,do you want to continue ,its only 32 kb ,,when i convert that to .hex with swaphex it come to 91kb and the same message comes up ,the file is too big ,,i ve just created that file in toxic ,
i opened toxic and put the cam id starting with 24 and they my ird in forward starting with 12 and then my bk ,left the keys blank
and then clicked on the ntl and then save ,,
is there any problem with the fun card ,,
the cas 3 programmer taked the .bin file do i still need to change it to hex file or what
in toxic i am not opening any file lilke .bin files around for ntl ,do i need to do that
whats wrong
can some one tell what are the things i need to do
i also erased the card twice from the command erase from the card programmer
thanks

[abbs2002]

you can not program exteep.bin into your fun card, like I said in my earlier message, your bin file needs to be swapped over the sawpbin and that will give you the file that you can program to your card which is a hex file, or better still rename youe exteep.bin to exteep.hex and program it to the card first the program the flash next.

[boxer29]

when i convert exteep.bin with swapbinhex it makes it to a exteep.hex but the size in 91kb im using toxic for that ,,leaving the keys bland and filling everything ,,when programming the card ,,it says the file to too big then the card memry do you still want to continue ,,say yes or no ,,,
iv used distnce and putting the ird backwards i mean 12 in the end ,,and that file is ok to write to the card ,and it makes a hex file as well ,,in distance so no need to change it with swapbin hex
one more thing if doing your exeep with distance do you havd go open a rom image of your area and then add your ird and bk ,or you just open distance and put in your ird backwards and bk and then the keys ,,camid starting with 24 and keys ,,or what you put in there ,,
whats wrong with my toxic why its giving a bin file which is bigger and when coverted to hex it makes it to 91kb
also when i did the card with distance after putting it in i can get some channels but not all ,,i can get the epg working with whats coming next and the sky sports news channel ,,but movies and soports are not on ,,
and it still gives me the message that your card is not inserted properyl ,contact 150 quoting message 1007 and it times its 1004 ,is it still the eexeep or what ,,if you do a card with distance do you still have to use the hex file coming with distace ,,it seemed an old filel in 2005 i think ,so can i put the other flash file from the chaos for my area and then do it ,,
what should i do now
thanks for your help

[abbs2002]

Originally Posted by boxer29

when i convert exteep.bin with swapbinhex it makes it to a exteep.hex but the size in 91kb im using toxic for that ,,leaving the keys bland and filling everything ,,when programming the card ,,it says the file to too big then the card memry do you still want to continue ,,say yes or no ,,,
iv used distnce and putting the ird backwards i mean 12 in the end ,,and that file is ok to write to the card ,and it makes a hex file as well ,,in distance so no need to change it with swapbin hex
one more thing if doing your exeep with distance do you havd go open a rom image of your area and then add your ird and bk ,or you just open distance and put in your ird backwards and bk and then the keys ,,camid starting with 24 and keys ,,or what you put in there ,,
whats wrong with my toxic why its giving a bin file which is bigger and when coverted to hex it makes it to 91kb
also when i did the card with distance after putting it in i can get some channels but not all ,,i can get the epg working with whats coming next and the sky sports news channel ,,but movies and soports are not on ,,
and it still gives me the message that your card is not inserted properyl ,contact 150 quoting message 1007 and it times its 1004 ,is it still the eexeep or what ,,if you do a card with distance do you still have to use the hex file coming with distace ,,it seemed an old filel in 2005 i think ,so can i put the other flash file from the chaos for my area and then do it ,,
what should i do now
thanks for your help

yeah when you pass the file over swapbin your hex file will be 90kb or 91kb,
which card are you trying to program?
have erased the card? if not it will be full
what is distance???

[boxer29]

im using a fun card 2 to do that ,,i did erase the card as well in the programed ,,do i have to erase the CPU as well there are 2 options in where you erase your card ,on is erase eeprom and the other is CPU,,,
distance is another programme like toxic you put your ird and bk to get eephex and then put it in your card via the programme ,,
what am i doing wrong here ,,are there any setting problems or what,,
i try to put eephex and then the flash file
what next
thanks