2110 ex C&W Net id

[callum16]

i am in nottingham and want to set a 2110 up for the derby area.
(i have bk n ird details)

how can i set it up for derby whilst being in nottingham.

as in the past ive never needed 2 worry as im in nthell pure.

am i right in thinking i need to short the battery

boot to eng menu with cable feed out (so it doesnt set to nottm)

then place the programmed funcard in

and when the box reboots pull power out

Take to derby and plug in?


all sounds like it will be nice and easy but probably wont be

Thanks cal

[yusuf_gaz]

Hi

Thers no baterry in 2110. You need to press < > ok and standbye button at same as you are powering up (may need help from someone) till you see ld06 box will then reset go in EM and netid should be 09999. Then you need to do the netid for derby using funcard method. Dont put feed in.

If you put cable feed in at your place it will set it for pure and you will have to do it again.

Or just take it to Derby and set it there with funcard method.

Regards

[callum16]

do i reset the box with cable feed in or out?

thanks cal

[abbs2002]

Originally Posted by callum16

do i reset the box with cable feed in or out?

thanks cal

Cable feed out since you are setting it for a different area m8.

[callum16]

thanks mate, i have got the box to reset and the net id is now 09999

but when i insert the programmed fun card nothing happens?

i have used net id v2.1.7 and saved the files as flash , int, ext

and the details are all correct, any reason why it isnt working?

thanks cal

[g80878]

Originally Posted by callum16

thanks mate, i have got the box to reset and the net id is now 09999

but when i insert the programmed fun card nothing happens?

i have used net id v2.1.7 and saved the files as flash , int, ext

and the details are all correct, any reason why it isn't working?

thanks cal

Try erasing the card 2 or 3 times first then write card in following method :

exteep
inteep
flash

then inteep again and should be ok.

[abbs2002]

Originally Posted by callum16

thanks mate, i have got the box to reset and the net id is now 09999

but when i insert the programmed fun card nothing happens?

i have used net id v2.1.7 and saved the files as flash , int, ext

and the details are all correct, any reason why it isnt working?

thanks cal

The method are exactly as g80878 mentioned, also check the BK and IRD are correct just incase m8.

[morashid679]

I always set the symbol rate and frequency after I have inserted the funcard.
Then if the box doesn't change the netid straight away by rebooting I flick through the pages until the box reboots.

[callum16]

checked bk and ird and erased card several times

reprogramed and still no joy . .. .

[abbs2002]

Originally Posted by callum16

checked bk and ird and erased card several times

reprogramed and still no joy . .. .

Which card are you trying to program m8, Mosc card or Fun card??