Di4000 - t

[abbs2002]

Originally Posted by Trooperlee

Ok, so i dont need to erase the card then first like it says? which steps do i need take?


which box would i load the updated hex file?

cheers lee

If you don’t have the Box Key and the IRD written under the box or on the back of it, make sure you get them of the card first before erasing it otherwise they will be erased then you will have a bigger job to get them m8.

[G77]

yeah, on the programmer program there will be a button to extract and save.

make sure you extract and save the exteep before you do anything else

[Trooperlee]

ok so when it comes if i just hook it up and install the drivers and software.

Attempt to back up what ever is on the card first.


then load the TW_CHAOS_FUN_FIX_271108 to the box next to flash. then just click write?

then all should be ok again?

[abbs2002]

Yeah you will need to back up the files in the card and make note of your Box Key and IRD put them somewhere safe you will need them for the future, then erase the card few time to get rid of what's in it, make your Exteep.hex and write it to the card first when it's done write the Flash for your area TW_CHAOS_FUN_FIX_271108 and when that's done you are good to go m8, if you've done everything correct all the channels will be cleared...enjoy.

[Trooperlee]

how do i make the Exteep.hex???

[G77]

first off i'd just overwrite the flash, then if it still doesn;t work, you'll need to erase the whole card and start again.

you make your exteep with toxic or similar

have a look in the download section for funcard tools and tuts

[Trooperlee]

So if i just rename TW_CHAOS_FUN_FIX_271108.HEX to flash.hex and load it into the correct box and just click write??


i have just got toxic 6

how would i get this information that is needed if the overwrite dont work

[abbs2002]

Originally Posted by Trooperlee

So if i just rename TW_CHAOS_FUN_FIX_271108.HEX to flash.hex and load it into the correct box and just click write??


i have just got toxic 6

how would i get this information that is needed if the overwrite dont work

This how you do it m8, when you get your card reader / writer set up with your PC i.e drivers and everything else, I’m using Infinity USB as an example here, open the application and pop in you faun card in the car reader slot click on TETECT and whit for the card reader to verified the card, then click on READ at the bottom of the application make sure you do not click on ERASE yet, you will get a message saying “flash memory will be erased to access ext. EEprom” click OK the card reader will read the card for you, you will see where it says EXT. EPROM just facing it on your right hand side of the application click on save and save it to a folder where you can find it then open “AU Fun & ATmega Boxkey Reader that you can get from Download section and click on OPEN SAVED EX EEPROM and there you go m8, you will get your Box Key and your Box IRD…Happy Days…

[G77]

yeah, one thing i will ask is how come its only just gone off?

afaik theres not been any keyroll method change's lately

you do mention that you have had ppv working. maybe your blacklisted?

[abbs2002]

Originally Posted by Trooperlee

So if i just rename TW_CHAOS_FUN_FIX_271108.HEX to flash.hex and load it into the correct box and just click write??


i have just got toxic 6

how would i get this information that is needed if the overwrite dont work

Toxic 7 it’s included in Cable for Dummies folder in the download section m8.