ntl 250 cable mode problems

[derek1987]

hi i recently bought a ntl 250 cable modem that is supposed to hav 10mb loaded on to it. for the first 2 days it was rapid now it strugels to open a web page. do u have any ideas i dnt no if settings in haxorware are ryt.and there are critical errors in the event veiwer that i dnt hav a clue about, how would u manage to upgrade it to 20mb do u just need to change the config file and click firmware upgrade on Haxorware Control Panel.any help would be much appreciated

.

Built on Fri Nov 21 12:05:16 2008
Uptime: 10h 05m 29s
Status: Scanning
Trying 331 MHz
Haxorware
Version 1.0rc6
Status

Overview
Task Status
Acquire Downstream Channel Done
Obtain Upstream Parameters Done
Upstream Ranging Done
Establish IP Connectivity Done
Retrieve Time of Day Done
Negotiate security Done
Receive configuration Done
Register connection Done
Cable modem status Operational
HFC Parameters
Mode DHCP

IP Address
Subnet

TFTP Server
TFTP Filename c
ToD Server
Configuration file
Name class-cm-bas.cm
Size 468 bytes
Compliance DOCSIS 1.0

Signal
Downstream
Frequency 331 MHz
Status Locked
Annex DOCSIS
Modulation QAM256
Receive Power 2.7 dBmV
Signal to Noise ratio 38.7 dB
Upstream
Frequency 29 MHz
Channel ID 4
Status Ready
Modulation TDMA
Transmit Power 53.0 dBmV

Event Log

2009-06-29 22:35:57 Notice I401.0 TLV-11 - unrecognized OID
2009-06-29 22:35:55 Critical D003.0 DHCP WARNING - Non-critical field invalid in response.
2009-06-29 22:35:44 Critical R004.0 Received Response to Broadcast Maintenance Request, But no Unicast Maintenance o
2009-06-29 22:35:20 Notice I401.0 TLV-11 - unrecognized OID
2009-06-29 22:35:17 Critical D003.0 DHCP WARNING - Non-critical field invalid in response.
2009-06-29 22:35:05 Critical R004.0 Received Response to Broadcast Maintenance Request, But no Unicast Maintenance o
2009-06-29 22:34:40 Notice I401.0 TLV-11 - unrecognized OID
2009-06-29 22:34:38 Critical D003.0 DHCP WARNING - Non-critical field invalid in response.
2009-06-29 22:34:25 Critical R004.0 Received Response to Broadcast Maintenance Request, But no Unicast Maintenance o
2009-06-29 22:33:41 Notice I401.0 TLV-11 - unrecognized OID
2009-06-29 22:33:38 Critical D003.0 DHCP WARNING - Non-critical field invalid in response.
2009-06-29 22:33:25 Critical R004.0 Received Response to Broadcast Maintenance Request, But no Unicast Maintenance o
2009-06-29 22:32:40 Notice I401.0 TLV-11 - unrecognized OID

Configuration

Settings
General
Factory Mode no
Disable Firmware Upgrades yes
Force Network Access yes
Tftp Enforce Bypass
Disable IP Filters on startup no
Control Panel IP Address
DHCP Server /yes

Telnet server
Username
Password


Frequency

Addresses

Config File

Baseline Privacy

Advanced

Static IP

Stealth

Downloader

Web Shell

Factory Defaults

Backup and Restore

Firmware upgrade

About

Reboot

Sbhacker.net | Sbhacker.net Forums

[Jon007]

have you tried changing your mac address?

[jinxt]

make a note of the your mac (address page)
get latest hax (rev32) on there

unicast message in log means mac conflict i believe (someone correct me if i'm wrong)

what hax version is currently on there?

[lee-ds]

1.0rc6, which is fine.

@ OP, assuming you're not losing connection and it's just slow, I'd look for any network issues in your area on VM website.

[derek1987]

Originally Posted by Jon007

have you tried changing your mac address?

Hi m8 have not tried this as dnt no how. ive ran dhcpsniffer and got a couple of macs but dnt no what to do from here???

[derek1987]

Originally Posted by lee-ds

1.0rc6, which is fine.

@ OP, assuming you're not losing connection and it's just slow, I'd look for any network issues in your area on VM website.

hi m8 it realy is slow it wont even download of utorrent. im runing a upload/dnload meter just now DL:0.9KB/sec UL 0.0KB/sec. im lucky if if the DL goes past 6.0KB/sec. Checked VM website nothing about dundee.Can u please take me throgh the process of changing the mac step by step will be much appreciated

[50pounds]

Originally Posted by derek1987

hi m8 it realy is slow it wont even download of utorrent. im runing a upload/dnload meter just now DL:0.9KB/sec UL 0.0KB/sec. im lucky if if the DL goes past 6.0KB/sec. Checked VM website nothing about dundee.Can u please take me throgh the process of changing the mac step by step will be much appreciated

http://192.168.100.1/addresses.html

go there look for

HFC MAC - enter MAC here you got from dchp sniffer

Ethernet MAC "DO NOT TOUCH!" LEAVE IT AS IT IS..

USB MAC - ANY BUT THE NOT HFC MAC

Serial Number - SAME AS THE HFC MAC WITHOUT THE :

hope this helps

[Jon007]

Originally Posted by derek1987

Hi m8 have not tried this as dnt no how. ive ran dhcpsniffer and got a couple of macs but dnt no what to do from here???

go into haxorware then to addresses, change the mac there, then change the usb mac to the same but with the last digit one higher

what speed is speedtest.net showing?

[/24]

then use smac to spoof pc nic mac or if connected to a router change the mac of the wan port on the router

[cockneysean]

You only need to change the HFC MAC, just leave the USB and ethernet MAC's alone, they do not need to be changed, it makes no difference. Changing the ethernet MAC has been known to create extra issues for some people.

There's no point changing anything else, especially if you are getting a connection, you could be opening up a can of worms.

Also, you say your speeds are slow. How are you connecting? Are you using a router? Are you using wireless? If you are using a router, try resetting it by powering on and off. Mine goes slow sometimes and just needs a reset due to running out of memory etc. If you are using wireless, is it secured with WEP or WPA? Someone could well be stealing it! Make sure you are using WPA to secure your wireless, as WEP is easily hacked.

One more thing, how many computers are connected in your home? Another PC could be hogging all the bandwidth. I ask this as you say that you are indeed getting a connection, albeit a slow one.