Haxorware 1.1rev32

[davidfm4]

Iv tried a few versions of haxorware, Im trying 1.1rev32 at the mo but I still cant get online. Iv searched the forums and found a few guides but no joy is there a diffinative guide or does in matter where you are in the uk.

[chef1]

How to get your new haxorware modem online

ok
Open up this pm and leave it open, it has all the info to get you online

then plug in the modem and conect to the pc/laptop via ethernet cable no coax

the goto internet explorer an type http://192.168.100.1/ or copy and paste this one

you will no have a menu for haxor click the settings menu and set them up like this


press save and then goto frequencey and setup like so


press save and goto addresses


Now this is the important bit
In the top box put in the mac address from below
leave the usb mac as it is
and in the ethernet mac put the same mac addres but chage the end digit by 2
example
hfc mac 00:C0:59:E8:4C:8C
leave the usb mac
ehternet mac 00:C0:59:E8:4C:8E

SERIAL NUMBER IS JUST THE HFC MAC WITHOUT THE : 00C059E84C8C


This method works for me
no tftp or config required but i still belive you need a good working mac
also there are other methods kicking around for your mac address

USB MAC = HFC MAC - 1 (in HEX).
Enet MAC = HFC MAC + 6 (in HEX).
Serial = HFC MAC without the ':'s


This works for me in Glasgow pure m8
been online for 3 weeks on 20mb without any probs

hope this helps

[davidfm4]

Thanks every things done in the overview area, great. This is the best result Iv had so far. Iv got local connection and the ready light is still off, Any ideas?

[50pounds]

Originally Posted by davidfm4

Thanks every things done in the overview area, great. This is the best result Iv had so far. Iv got local connection and the ready light is still off, Any ideas?

in overview it should say: Status: Operational

dont try force any configs!

also try get a good mac from scanning

look at the pictures below

[metalpunk]

Good post ppl.......showing the overview page etc..... credit to the forum

[davidfm4]

In haxoroware panel it says registration complete, Im sure my macs are ok so I will try smac .

[chef1]

Please post your results m8

[davidfm4]

Done it!!! At last. Thankyou to CHEF1 and his post. The only thing I had to change was set my BPI to disable. So if you live in a different area do have to change settings accordinly because Iv tried quite a few from differant posts? Again thankyou CHEF1

[chef1]

glad to hear m8

ill edit the post to let others know about the bpi
as mines is disabled aswell

[50pounds]

ohh yea i forgot about BPI lol silly me anyways glad it's sorted davidfm4