Starview 4/The Box help requried with tv output

[ido1111]

Hi looking for some help with my The Box Super Usb and outputting to another tv.
I have my box connected to tv in living room by scart cable and use the optical output to my amp for sound. I previously used a sky hd box via hdmi to tv and used the tv out from the sky hd box to run a coax cable into bedroom to tv with a magic eye to watch sky in there and change channel.

I now want to watch The Box in the bedroom but when i conenct coax cable to tv out and connect to second tv (minus magic eye as i know this won't work on the box) i can't get tv tuned in. When i attempt to tune it in i can get a picture on the tv but sound is just loud buzzing intereference. tried to finetune and it just quietens the intereference before losing the picture. tried taking out the optical cable fromt he box incase this affected sound but doesn't make a difference can't see any settings in the menu either regarding sound output.

any suggestions?? also anyone know a cheap remote sender that works well if i get this sorted?

[ido1111]

just had a though but not at home to check so hoping someone can advise.
i know there is an audio button on remote that brings up an option which i think is currently set at something like L + R for me just now which is fine as i use optical out to an amp. would changing this have any affect on the output from the tv out socket on the starview box?
hopefully its this and i need to set it to a mono output or similar to get sound to work on the second tv.
cheers

[smoggy]

go into menu/user set up and make sure uhf modulator is set to Pal 1

[ido1111]

cheers for reply will try that when i get home in an hour.

[ido1111]

Originally Posted by smoggy

go into menu/user set up and make sure uhf modulator is set to Pal 1

sorted mate. thanks for your help. just need to get ir sender now.
cheers again