5100 PVR - Dreaded : Problem

[McTazzz]

Hi All,
I have just been given a box to fix with the dreaded : on the display.
I have read through various posts on this and have picked up the following.

1. May be a psu fault - I will try and replace psu first but if not succesful can I use the Max V jtag guide / info

2. Any other advice most welcome

Regards
Taz

[McTazzz]

Me Again,
Ok, tried spare psu board - still the same so im going to try JTag.
I have been reading various info and watched video guide, a few questions thoungh...
1. Am I correct in assuming that JKeys 1.3.3 , 2.9.11 and SkyMax do the same thing or do you have to use one after the other.
2. Even better can any of you nice peeps direct me to a idiots guide.

Thanks all
Taz

[McTazzz]

Edited From Above:

Ok, tried spare MaxV psu board - now getting 2 flashing : green lights so im going to try JTag.
I have been reading various info and watched video guide, a few questions thoungh...
1. Am I correct in assuming that JKeys 1.3.3 , 2.9.11 and SkyMax do the same thing or do you have to use one after the other.
2. Even better can any of you nice peeps direct me to a idiots guide.

Thanks all
Taz

[dolphin]

Am I correct in assuming that JKeys 1.3.3 , 2.9.11 and SkyMax do the same thing or do you have to use one after the other

They all do the same thing and you only need to use one, use JKeys 2.9.11, if this does not work try JKeys 1.3.3.

Not sure which "Video" guide you mean but I put together a couple of guides called "Jtag How To" and "JKeys 2_9_11" dig them out if you have not done so already.

You say you now have two flashing dots after changing the power board, were these not present before that?

Have you tried pressing the reset button on the main board and reloading the UFL software??

Lets know how you get on and I'll see if I can help.

D

[ronster]

Follow dolphins guides but have you got the 5100 TSOP?

[McTazzz]

Thanks fo replys,

1. Have not found those tusts yet, I will have a look

2. I dont have 5100 TSOP ?????

Regards
Taz

[ronster]

Think you'll struggle to locate the 5100 tsop unless you can find someone that will dump it from their box.
The EX5000 tsop is here posted by satsmo, i would imagine you'll have more luck with this than the maxV tsop.
Eurovox ex5000 pvr warning !!!!!!!

[dolphin]

1. Have not found those tusts yet, I will have a look

Check your pm m8.

D

[McTazzz]

Have all the kit to JTag but when I opened the box it looks different from all the tuts etc.
Anyone JTaged a pvr ... help appreciated
Taz

[dolphin]

Yeh the PVR is missing the large diode and also has the HD connected to another block.

If the HD board is in the way just lift it up and off, it can be replaced after Jtagging. I answered the diode/power question in the other post.

D