samsung 2100c bk and net id help - Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums

dogdog · 14-07-09, 01:52 PM

Hi all, I would like some help in setting up my Sammy 2100c. I have the box but with out the card. I live in excw area. The box net id is set to 09999. I don’t have the bk to this box so I am unable to set it via atmega or fun. I have tried to jtag the box but I get the ird but the bk comes up with all 0000000000 this is because the net id is not set I think, when I plug it in the display goes to ap52 (no net id set). So my problem is without bk can’t set net id and with out net id set cant get bk. Can anyone help me out? I have tried using OCD command with mac_mot running but just can’t get my head around it. Did the nitid.mac file just can’t run Marco? It says file ext is wrong???????? Is there anything else I can do, to get the bk or set net id.
Many Thanks.

Tee_111 · 14-07-09, 02:18 PM

check the bytes m8... go into eng menu and find the version of the box.. then use the search button for sammy bytes..

dogdog · 14-07-09, 02:21 PM

have checked the ver 3.6v and have set the bytes to the correct one. still no bk

ronster · 14-07-09, 02:41 PM

whats the net id your trying to set

dogdog · 14-07-09, 02:43 PM

41050

ronster · 14-07-09, 02:56 PM

Reset the box so its 09999 then using OCD and mac_MOT driver enter these bytes exactley as they are,hit enter after each byte then after the forth one reboot your box and net id should set to 41050
BYTE 0x3120000C = $A0
BYTE 0x3120000D = $5A
BYTE 0x3120000E = $13
BYTE 0x3120000F = $2E

rizlaman · 14-07-09, 03:27 PM

You need to set live on stream it seems to be best way now,but i think net id needs to be correct to do this.Might be wrong try it live on stream see wat happens,if have not already tried.

dogdog · 14-07-09, 04:16 PM

thanks mate job done.

14-07-09, 01:52 PM	#1 (permalink)
dogdog Junior Member Join Date: May 2008 Posts: 22 Thanks: 2 Thanked 0 Times in 0 Posts	samsung 2100c bk and net id help Hi all, I would like some help in setting up my Sammy 2100c. I have the box but with out the card. I live in excw area. The box net id is set to 09999. I don’t have the bk to this box so I am unable to set it via atmega or fun. I have tried to jtag the box but I get the ird but the bk comes up with all 0000000000 this is because the net id is not set I think, when I plug it in the display goes to ap52 (no net id set). So my problem is without bk can’t set net id and with out net id set cant get bk. Can anyone help me out? I have tried using OCD command with mac_mot running but just can’t get my head around it. Did the nitid.mac file just can’t run Marco? It says file ext is wrong???????? Is there anything else I can do, to get the bk or set net id. Many Thanks. Last edited by dogdog; 14-07-09 at 01:54 PM.

14-07-09, 02:18 PM	#2 (permalink)
Tee_111 Super Moderator Join Date: Dec 2006 Location: West Yorks Posts: 2,291 Thanks: 93 Thanked 255 Times in 184 Posts	Re: samsung 2100c bk and net id help check the bytes m8... go into eng menu and find the version of the box.. then use the search button for sammy bytes..

14-07-09, 02:21 PM	#3 (permalink)
dogdog Junior Member Join Date: May 2008 Posts: 22 Thanks: 2 Thanked 0 Times in 0 Posts	Re: samsung 2100c bk and net id help have checked the ver 3.6v and have set the bytes to the correct one. still no bk

14-07-09, 02:41 PM	#4 (permalink)
ronster Senior Member Join Date: Jan 2007 Location: Here Posts: 2,398 Thanks: 140 Thanked 981 Times in 529 Posts	Re: samsung 2100c bk and net id help whats the net id your trying to set

14-07-09, 02:43 PM	#5 (permalink)
dogdog Junior Member Join Date: May 2008 Posts: 22 Thanks: 2 Thanked 0 Times in 0 Posts	Re: samsung 2100c bk and net id help 41050

14-07-09, 02:56 PM	#6 (permalink)
ronster Senior Member Join Date: Jan 2007 Location: Here Posts: 2,398 Thanks: 140 Thanked 981 Times in 529 Posts	Re: samsung 2100c bk and net id help Reset the box so its 09999 then using OCD and mac_MOT driver enter these bytes exactley as they are,hit enter after each byte then after the forth one reboot your box and net id should set to 41050 BYTE 0x3120000C = $A0 BYTE 0x3120000D = $5A BYTE 0x3120000E = $13 BYTE 0x3120000F = $2E

14-07-09, 03:27 PM	#7 (permalink)
rizlaman modfather Join Date: May 2008 Posts: 586 Thanks: 18 Thanked 65 Times in 58 Posts	Re: samsung 2100c bk and net id help You need to set live on stream it seems to be best way now,but i think net id needs to be correct to do this.Might be wrong try it live on stream see wat happens,if have not already tried. __________________ !thanks go's along way!

14-07-09, 04:16 PM	#8 (permalink)
dogdog Junior Member Join Date: May 2008 Posts: 22 Thanks: 2 Thanked 0 Times in 0 Posts	Re: samsung 2100c bk and net id help thanks mate job done.