Missing several Channels The Box Super USB - Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums

c_matrix_c · 21-07-09, 02:52 PM

Hi

Installed my new The Box Susper USB reciever lastnight. After fidling with it for a while managed to get most of the channels working on it. The box is flashed and my area is croydon (south London old Nt* area and current V*gin).

I dont understand why I can get most of the channels and not all. Im missing all of the SK* moives channels, plus Z*e TV, Z*e Cin*ma etc.

I did auto scan on freq 411.000. & sr 6952

Any Suggestions will be well appreciated.

martin-f · 21-07-09, 02:57 PM

scan under tw

Croydon TW 40979 531.000 6.952

c_matrix_c · 21-07-09, 03:01 PM

I tried scanning on 531000 but I didnt get any more channels that I have. Also not too sure where do i have to input 40979?

martin-f · 21-07-09, 03:07 PM

no dont input anything just do a auto scan if that does not bring them up do a direct scan ie remove your splitter cable stright from the wall to tv lets us know results please you would be as well doing a factory reset before you try again

c_matrix_c · 21-07-09, 03:16 PM

Ok but I have a cable coming in to the house which goes into a box. that box have two outputs. One goes to the cable modem the other is currently connected to the The Box Revciever.

portbhoy · 21-07-09, 03:23 PM

Connect the cable before the splitter to your box factory reset and scan again

martin-f · 21-07-09, 03:23 PM

just remove the one going to the cable modem

c_matrix_c · 21-07-09, 03:25 PM

remove that and then scan again..

Are there any risks with take the cable modem out??

martin-f · 21-07-09, 03:25 PM

yes

no m8

c_matrix_c · 21-07-09, 03:26 PM

Quote:

Originally Posted by portbhoy

Connect the cable before the splitter to your box factory reset and scan again

its hard wired into the wall. I dont think I can open it or tamper with it.

21-07-09, 02:52 PM	#1 (permalink)
c_matrix_c Member Join Date: Jul 2009 Posts: 32 Thanks: 1 Thanked 2 Times in 2 Posts	Missing several Channels The Box Super USB Hi Installed my new The Box Susper USB reciever lastnight. After fidling with it for a while managed to get most of the channels working on it. The box is flashed and my area is croydon (south London old Nt* area and current Vgin). I dont understand why I can get most of the channels and not all. Im missing all of the SK moives channels, plus Ze TV, Ze Cin*ma etc. I did auto scan on freq 411.000. & sr 6952 Any Suggestions will be well appreciated.

21-07-09, 02:57 PM	#2 (permalink)
martin-f Super Moderator Join Date: Apr 2008 Posts: 3,298 Thanks: 1,209 Thanked 1,317 Times in 914 Posts	Re: Missing several Channels The Box Super USB scan under tw Croydon TW 40979 531.000 6.952 __________________ 1mtr orbital dish motorised azbox premium hd technomate 6900 hd combo "never argue with an idiot, they will bring you down to their level and beat you on experience"

21-07-09, 03:01 PM	#3 (permalink)
c_matrix_c Member Join Date: Jul 2009 Posts: 32 Thanks: 1 Thanked 2 Times in 2 Posts	Re: Missing several Channels The Box Super USB I tried scanning on 531000 but I didnt get any more channels that I have. Also not too sure where do i have to input 40979?

21-07-09, 03:07 PM	#4 (permalink)
martin-f Super Moderator Join Date: Apr 2008 Posts: 3,298 Thanks: 1,209 Thanked 1,317 Times in 914 Posts	Re: Missing several Channels The Box Super USB no dont input anything just do a auto scan if that does not bring them up do a direct scan ie remove your splitter cable stright from the wall to tv lets us know results please you would be as well doing a factory reset before you try again __________________ 1mtr orbital dish motorised azbox premium hd technomate 6900 hd combo "never argue with an idiot, they will bring you down to their level and beat you on experience"

21-07-09, 03:16 PM	#5 (permalink)
c_matrix_c Member Join Date: Jul 2009 Posts: 32 Thanks: 1 Thanked 2 Times in 2 Posts	Re: Missing several Channels The Box Super USB Ok but I have a cable coming in to the house which goes into a box. that box have two outputs. One goes to the cable modem the other is currently connected to the The Box Revciever.

21-07-09, 03:23 PM	#6 (permalink)
portbhoy Junior Member Join Date: Aug 2008 Posts: 26 Thanks: 4 Thanked 8 Times in 7 Posts	Re: Missing several Channels The Box Super USB Connect the cable before the splitter to your box factory reset and scan again

21-07-09, 03:23 PM	#7 (permalink)
martin-f Super Moderator Join Date: Apr 2008 Posts: 3,298 Thanks: 1,209 Thanked 1,317 Times in 914 Posts	Re: Missing several Channels The Box Super USB just remove the one going to the cable modem __________________ 1mtr orbital dish motorised azbox premium hd technomate 6900 hd combo "never argue with an idiot, they will bring you down to their level and beat you on experience"

21-07-09, 03:25 PM	#8 (permalink)
c_matrix_c Member Join Date: Jul 2009 Posts: 32 Thanks: 1 Thanked 2 Times in 2 Posts	Re: Missing several Channels The Box Super USB remove that and then scan again.. Are there any risks with take the cable modem out??

21-07-09, 03:25 PM	#9 (permalink)
martin-f Super Moderator Join Date: Apr 2008 Posts: 3,298 Thanks: 1,209 Thanked 1,317 Times in 914 Posts	Re: Missing several Channels The Box Super USB yes no m8 __________________ 1mtr orbital dish motorised azbox premium hd technomate 6900 hd combo "never argue with an idiot, they will bring you down to their level and beat you on experience"

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
The box super usb fixed november 08	HONCHO	Starview	85	21-09-10 04:09 PM
The Box Super USB Problems	adam1942	Starview	15	05-07-10 10:31 PM
the box super usb	blackie09	Starview	1	10-04-09 07:42 AM
Missing channels	elvis	Eurovox	6	23-12-08 10:04 PM
Just To Clarify, Firware for Starview the Box super & Starview USB	trademark2k6	Starview	1	30-11-08 05:59 PM