console unlocker not working help asap please

[jasone6636]

i have an 250 modem with no p option all files installed and ocx in place but cant get console unlocker to work it keeps saying error i just run hyperterminal on the 250 and all the info has come up and lights are working so it is not bricked could some one please help

[50pounds]

Originally Posted by jasone6636

i have an 250 modem with no p option all files installed and ocx in place but cant get console unlocker to work it keeps saying error i just run hyperterminal on the 250 and all the info has come up and lights are working so it is not bricked could some one please help

As stated around this forum

USAGE:
1. Apply serial and Ethernet connection between your PC and the modem
2. Set your PC IP parameters to:
IP: 192.168.100.10
Subnet: 255.255.255.0
Gateway: 192.168.100.1
3. Power on the modem and wait for it to startup (10 secs)
4. Open the exploit application and hit “Execute Exploit”
5. If it says its successful, then the console is now ready to accept connections!
If it fails, power cycle the modem and try the application again.
At this point,
if you want to restore your bootloader to the original 2.1.6d that has the re-flashing menu etc, you need a copy of SoftJTAG and the
2.1.6d bootloader.


**BE CAREFUL WHEN USING SOFTJTAG -
As you can brick your modem if your not careful**
1. Open SoftJTAG, and connect via your serial port.
2. On the right hand side, click on “Write Bootloader” and select the 2.1.6d bootloader file
3. Wait till its done (this takes 10 – 15 minutes). Once it’s done, close SoftJTAG
4. Start HyperTerminal/TeraTerm and connect to your serial port
5. Reset the modem
Upon resetting the modem, you will now be given the option to stop at P as it is now booting with the 2.1.6d bootloader. You MUST press the button
and stop then, as if you miss it and let it fully boot, your bootloader will be over-written again with the 3.1.6d, in which case you will have to repeat
these steps again and be quicker not to miss it next time.
If you are successful in entering the menu,
you can now re-flash or whatever you wish to do with your modem from this menu!
Legal disclaimer: I take no responsibility for the above given information or files and what you decide to do with it. This is purely for information purposes and should not be attempted to be executed in any way,
particularly for any illegal purposes. I could tell you thumping a noob over the head with a modem would probably knock them unconscious, but that doesn’t mean you should do it.
You'll need all the following files on your PC. If you use the Ambit Tool or similar apps you've probably already installed .NET Framework & Visual J.

[BL4K3Y]

It would help if you gave us some information about the error you are receiving .

[cockneysean]

Originally Posted by jasone6636

i have an 250 modem with no p option all files installed and ocx in place but cant get console unlocker to work it keeps saying error i just run hyperterminal on the 250 and all the info has come up and lights are working so it is not bricked could some one please help

You make a ery urgent sounding post wanting help asap but you have failed to explain your situation fully and furnish us with information so that we may be able to help you solve your problem.

You have said that you are getting an error, but you have not told us which one.

Also you need to explain fully all yourconetis, how they are connected and what they are connected to etc.

Once you have told us all this, we will be able to diagnose the problem for you. Don't worry, you've probably just made a simple error and missed something out.

Read the info that has been kindly posted previously and the report back with your findings.

When you have fixed your problem, it is a good thing to post back and say how you fixed it and what your problem actually was so that others learning on the forum can see the info.

[jasone6636]

hi i have followed the tut exactly put all the files in place and installed the other 2 things but i still get runtime error it has alex firmware on it i checked in hyperterminal sometimes the console unlocker says it should be unlocked but it isnt

[yusuf_gaz]

Hi

Keep trying the exploit as far as I know is hit and miss type it will say unlocked when it actually isnt and Ive had to try a few times on each occassion saying unlocked but couldnt get in then all of a sudden on one occassion wala said unlocked and managed to get in.

Have you tried rebooting pc then trying.

Regards

[/24]

The best way to check if the modem is unlocked is to fire up hyper terminal and connect to the modem hit enter a couple of times and you should be greeted by the CM> prompt if you are then it has indeed been unlocked. One thing to check as well is the previous commands if you tap up a couple of times you should see the previous commands run on the modem the one thing to check is that there is no gibberish there as this would suggest either loose connections or dodgy 232

[50pounds]

SoftJTAG Crash fix :)

read this post mate might help

[50pounds]

Oh and i forgot to metion this post to

Found it by messing around lol and i did Not have time to edit

Console Unlocker step by step guide