net id sa8300 by fun card - Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums

boxer29 · 07-08-09, 12:46 AM

hi ,
ive got a sa8300 with the bk and ird ,,i am struggling to change the net id ,,the box was from tw and i want to change it to pure ,
i m trying to do the card method ,,ive tried by putting the line in without the card ,,but it wont update to my net id 00001
ive done the card with net id v2.1 and then put the card at the back its a fun ,,
nothing happens ,,do i have to plug the cable feed in as well ,or do it without it ,,my tb is not cut waiting for the tb blocker ,,
any suggestions ,,has any one changed the net id by this card method ,,
what card did they use and how did they managed
help pls
thanks

MaD_FOr_iT · 07-08-09, 12:49 AM

i dont know 2 much on v+ box but i do know its rarther the chip method or u use the atmega card check this post
Ways of setting a V+ Net ID??

G77 · 07-08-09, 09:27 AM

you should try a atmega card. dont get your hopes up thou. more than likely a 512chip lift is needed

geforcefx · 07-08-09, 11:35 AM

so G77 m8 if the box is allready from a pure erea. would u need to set the net id ? & pin . & do u have to deff remove the AT24c512 chip ! or can u get away with it ? thanks

G77 · 07-08-09, 08:05 PM

i dont live in pure so i wouldnt know, people have said pure to pure is ok, it sorts itself, providing you know the pin.

people do still report that some wone go thou

geforcefx · 07-08-09, 08:14 PM

k. mate ! im just trying learn abit about these ....in case i hit the jackpot on a carboot sale ! lol (i wish) just found this about the chip ""

Ok first of all there is a chance that this will work without blanking
the AT24c1024 chip located on the uderside of the board, its just
a case of try it and see befor you try to remove the chip ""

so i guess its all trail & error ..unless thers an updated tut around !!

G77 · 07-08-09, 08:24 PM

hmm, yeah, not familiar with pure like i said, i do get members mailing me there boards for a blank thou. if you can solder, just get a blank chip on the order

note, it is a at24c512 and not a 1024.

geforcefx · 07-08-09, 08:48 PM

o.k m8 thanks , think its time for a beer !! ahhhh

i will prob end up getting 1 all done as my soldering skills are not very good. thanks buddy !

the AMBER LIQUID ,mmmm

mikey mike · 11-01-10, 11:41 AM

hi just wondering.. do u need to programm the chip for the net id change if so how??
cheers

07-08-09, 12:46 AM	#1 (permalink)
boxer29 Member Join Date: Jun 2009 Posts: 76 Thanks: 1 Thanked 1 Time in 1 Post	net id sa8300 by fun card hi , ive got a sa8300 with the bk and ird ,,i am struggling to change the net id ,,the box was from tw and i want to change it to pure , i m trying to do the card method ,,ive tried by putting the line in without the card ,,but it wont update to my net id 00001 ive done the card with net id v2.1 and then put the card at the back its a fun ,, nothing happens ,,do i have to plug the cable feed in as well ,or do it without it ,,my tb is not cut waiting for the tb blocker ,, any suggestions ,,has any one changed the net id by this card method ,, what card did they use and how did they managed help pls thanks

07-08-09, 12:49 AM	#2 (permalink)
MaD_FOr_iT Senior Member Join Date: Dec 2008 Posts: 167 Thanks: 34 Thanked 34 Times in 31 Posts	Re: net id sa8300 by fun card i dont know 2 much on v+ box but i do know its rarther the chip method or u use the atmega card check this post Ways of setting a V+ Net ID??

07-08-09, 09:27 AM	#3 (permalink)
G77 Super Moderator Join Date: May 2008 Posts: 6,118 Thanks: 695 Thanked 1,250 Times in 1,044 Posts	Re: net id sa8300 by fun card you should try a atmega card. dont get your hopes up thou. more than likely a 512chip lift is needed __________________ 1M Motorised Dish, 45W-36E, DM800HD. Quad LNB Mesh Mini Dish, 28.2E, DM500, TM500. Samsung Galaxy S GT-I9000 XXJVU & CF-Root.

07-08-09, 11:35 AM	#4 (permalink)
geforcefx Senior Member Join Date: Jun 2008 Posts: 837 Thanks: 45 Thanked 31 Times in 30 Posts	Re: net id sa8300 by fun card so G77 m8 if the box is allready from a pure erea. would u need to set the net id ? & pin . & do u have to deff remove the AT24c512 chip ! or can u get away with it ? thanks

07-08-09, 08:05 PM	#5 (permalink)
G77 Super Moderator Join Date: May 2008 Posts: 6,118 Thanks: 695 Thanked 1,250 Times in 1,044 Posts	Re: net id sa8300 by fun card i dont live in pure so i wouldnt know, people have said pure to pure is ok, it sorts itself, providing you know the pin. people do still report that some wone go thou __________________ 1M Motorised Dish, 45W-36E, DM800HD. Quad LNB Mesh Mini Dish, 28.2E, DM500, TM500. Samsung Galaxy S GT-I9000 XXJVU & CF-Root.

07-08-09, 08:14 PM	#6 (permalink)
geforcefx Senior Member Join Date: Jun 2008 Posts: 837 Thanks: 45 Thanked 31 Times in 30 Posts	Re: net id sa8300 by fun card k. mate ! im just trying learn abit about these ....in case i hit the jackpot on a carboot sale ! lol (i wish) just found this about the chip "" Ok first of all there is a chance that this will work without blanking the AT24c1024 chip located on the uderside of the board, its just a case of try it and see befor you try to remove the chip "" so i guess its all trail & error ..unless thers an updated tut around !! Last edited by geforcefx; 07-08-09 at 08:18 PM.

07-08-09, 08:24 PM	#7 (permalink)
G77 Super Moderator Join Date: May 2008 Posts: 6,118 Thanks: 695 Thanked 1,250 Times in 1,044 Posts	Re: net id sa8300 by fun card hmm, yeah, not familiar with pure like i said, i do get members mailing me there boards for a blank thou. if you can solder, just get a blank chip on the order note, it is a at24c512 and not a 1024. __________________ 1M Motorised Dish, 45W-36E, DM800HD. Quad LNB Mesh Mini Dish, 28.2E, DM500, TM500. Samsung Galaxy S GT-I9000 XXJVU & CF-Root.

07-08-09, 08:48 PM	#8 (permalink)
geforcefx Senior Member Join Date: Jun 2008 Posts: 837 Thanks: 45 Thanked 31 Times in 30 Posts	Re: net id sa8300 by fun card o.k m8 thanks , think its time for a beer !! ahhhh i will prob end up getting 1 all done as my soldering skills are not very good. thanks buddy ! the AMBER LIQUID ,mmmm

11-01-10, 11:41 AM	#9 (permalink)
mikey mike Member Join Date: Nov 2009 Posts: 90 Thanks: 21 Thanked 3 Times in 3 Posts	Re: net id sa8300 by fun card hi just wondering.. do u need to programm the chip for the net id change if so how?? cheers

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FUN card.	rizlaman	Cable TV Chat	7	29-12-08 05:38 PM
how to prog a fun card	ineedhelpplease	Other Cable Boxes	4	25-12-08 10:27 PM