Symbol rate for Surbiton area please

[exfi]

Hi, I have managed to flash my eurovox today , now yesterday before flashing I did scan and was not able to see any channels, if somebody knows symbol rate for surbiton are please let me know.

Also I have uploaded CDF file for SW london area, hope this would work.

After inputting correct symbol rate do I just do powerscan or scan.

any help would be much appreciated.

[Steve V]

The symbol rate is 6.952.

That CDF will give you approx 3/4 of the potential channels available now days. Once you have entered this, do a power scan and you should pick up 38TP's in surbiton and you might need to re-enter a frequency to give you one more TP.

My suggestion is:
menu>installation>fast install
press 0000
press the red button
enter 121.000mhz
ensure step is on 8 and fav sort can be on or off i suggest on
press ok then it will scan
you should see approx 38 TP's come up

Once complete and you have soughted your favourites out and put the channels into the appropriate columns, go:
menu>installation>user install
press yellow button Ch edit

press red button ADD
press INFO and select channel name (suggest 039)
then add 118.000mhz into the frequency
6.952 as the symbol rate
QAM64 modulator
press ok

At this point you should be looking at a menu of the different frequencies on the one you just entered (039)select it so a tick comes up in the box
press manual scan
once complete you should then have the discovery channels approx another 12 channels
upgrade your favourite settings again and you should have approx 260 channels..

Hope this helps...

[exfi]

Hi Steve, very much appreciated for the details. I have returned my eurovox for the replacement, once back from the supplier I would let you know if it worked.

cheers

[Steve V]

How did you go with your new box??

[exfi]

Hi Steve,

Many thanks
Finally sorted out the issue.
I am not sure what was the problem with my cable line, but got new connection after that immediately channels were visible (since I had already loadedthe channels file). Anyway I did the powerscan again since some of the channels were scrambled. After powerscan got all channels.

Many thanks to everybody replied to my queries