mosc card trouble

[jayja113]

hi guys trying to read my mosc card i get this in nagra
Opening of COM1 was successful
ATR String: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50
30 31 31 20 52 65 76 42 30 44 3C
ROM Revision: 011
EEPROM Revision: RevB0D
ProviderID: 00
CamID: 00 00 00 00
Using BD3 Key: 4E 69 70 50 45 72 20 49 73 20 61 20 62 75 54 74
Attempting to login to BD3
BD3 login failed
Reading ROM11 failed
Closing of COM1 was successful

tried running sidewinder i get
cant detect comport may be in use some where else
make sure your card is inserted and loader is powered up
check ports and power and make sure loader is flashed

when i run winex with rom11 unblocker i get
_______________Setting up WinExplorer_________________
Script Error on Line 524
Sc.GetByte: Requested Byte Exceeds Last Read Request

ird = ird + hexstring(Sc.Getbyte(bytes),2)
bytes = bytes +1
if bytes = 19 then
exit do
end if
i run it with mikedata cartmans a86 bod script i get

Card Didn't Response Correctly-Please Reset Your Dual Unlooper By The Reset Button Before Starting The Script Again,Or Your Card MayBe Looped-Check In NagraEdit 4.1
Script Will Now Exit..Oh Dear
Script C:\ladbrokes poker\unlooper\MIKEDATA & CHARTMAN A86 AND BOD SCRIPT MAY 2007 A86.xvb Transmission Completed

any help plz guys am really stuck now thx jay

[G77]

persevere with sidewinder.

make sure no other apps are using the com port

[jayja113]

have pressed sidewinder 15 times in a row still getting nowt m8

[yusuf_gaz]

Hi

Noticed from your other thread that you been doing a rom 10, did you put jumper back onto correct bank and reset vcc for doing this rom 11.

Regards

[jayja113]

Originally Posted by yusuf_gaz

Hi

Noticed from your other thread that you been doing a rom 10, did you put jumper back onto correct bank and reset vcc for doing this rom 11.

Regards

yer m8 done that still no good

[BL4K3Y]

Is the unlooper flashed correctly? Where did you purchase it from?

[jayja113]

i have the powersync m8 flashed with newd13 from tmc

[spikebaby]

you will not get your correct bk from that card, that is if you require it, if you are just opening the card to reuse it should be perfectly fine

[jayja113]

Originally Posted by spikebaby

you will not get your correct bk from that card, that is if you require it, if you are just opening the card to reuse it should be perfectly fine

it will not open in nagra edit i have all the numbers just want to play with the rom11 m8 it keeps saying
Opening of COM1 was successful
Reset failed
Error reseting card, ATR string invalid
Closing of COM1 was successful

[BL4K3Y]

Have you selected the correct COM port and is your programmer in 3.68MHz Phoenix Mode? If all that is done that I am afraid your card is fried.