All Eurovox Stickies

[waqasahmed]

I was getting quite annoyed with the so many stickies and I thought they could be compiled into one. This is even more annoying on the phone

Anyway here you go

Eurovox Tutorials by Kris_Stuart69

1. Loading the software
Connect a 'null modem' cable from the box to your PC.
Run the loader application (click link below) and in the firmware box, click the browse button and find the firmware file you wish to load. Hit the 'Download' button and when 'reset receiver' message appears, switch the receiver off and then on again and the loading will begin.

Go to Private FTA for latest loader

2. Manual Updates.
To update manually, do the following :

Press 'MENU', go to 'LANGUAGE SETTINGS', press '1968' and you should now see two extra options.

emulation should be 'enabled'
emm capture should be 'enabled'

once enabled and you have 'emm capture' highlighted again type 1968 and you will see the key table.

Use the left & right buttons on the remote to cycle through the various encryption types.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

3. Backing up your channel data.
Run the loader util.
In the 'Channel data' section at the bottom, click the 'browse' button and choose a name and location for the channel data file.
Click the 'Upload' button and all channel settings will be downloaded and saved.


Hope this helps

REMEMBER THIS IS FOR EDUCATION PURPOSES ONLY.

My edit: Updated where to get firmware from

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Jumpy channel / long wait fix by flashman and Sossbaby
Sossbaby gave this good advice previously in another post. I have an addition to make to it.

I would appreciate if an admin could sticky the post if they think its worth keeping at the top as I see it recurring frequently.

good evening.
go to the channel thats breaking up, press the info button twice and note the frequency.(eg 522.000mhz).
go to menu, instalation, user instalation, enter pin.
you will now see a list of frequencies.
scroll down to the frequency that you noted before. (eg 522.000mhz).
press green button. ch edit.
press blue button. modify.
useing the numbers on the remote add 0.5 mhz to the frequency. (eg 522.000mhz becomes 522.500mhz.)
press ok.
it will say please wait to save data.
press exit.
if the picture is now stable,all is well.
if the picture is better but still glitches go back and add another 0.5mhz.
if the picture is worse go back and subtract 1mhz.
hope that helps.
sossybaby.

My addition is that when you add or subtract the 0.5 Mhz look at how quick the quality bar comes back. The quicker it comes back, the better the signal meaning no breakup, and also less time for the channel to come on when flicking up or down.

All in all making the box function better.

Enjoy

Flashman.

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Ronsters Guide To Flashing Box For Newbies by Ronster

Heres a quick guide for all those who have never flashed them before.

upload your channel data first and save to desktop or you will have to do a fresh scan
If your not sure which box yours is blue or red look at the box from above and you will
see the tuner on the right,were the cable feed goes in.
The blue 06 box tuner will measure 12 slots in the grill/slots and the red 07 will measure 8
1.connect your box to pc with the rs232 ports using a null modem cable (pictured) available from lincsat for a few quid Lincsat's Nick-nacks (Shop)
2.plug your box in, it dosnt matter if its in standby
3.open the new firmware and click on download and it will search you ports for a eurovox
once found click ok/yes and it will start to download,takes about 3 mins
thats it it really is that simple
if your box is a clone dont use this firmware it''ll brick it

if your box is a clone use the latest clone friendly firmware and flash it this way using dnupman
REQ: Idiots Guide To Updating Firmware On Eurovox Max

(See below for pics)

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Do Not Start New Threads or PM mods Asking For Keys by Lincsat

There are plenty of existing posts on the subject - anyone starting a new post asking for keys will get a ban

There has been a change today (Thursday 27/11/08). be patient and DO NOT FLOOD THE FORUM!!

There are plenty of threads already on this subject!!!

My edit: Added date

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

New Virgin Media Keys by nanochicken

Right now that i have your attention

This forum has now censored keys of any type. They will not appear fully so you are wasting your time publishing them. They will also be censored in any PMs.

23 ab 2b ** af b3 da **

See what i mean

Publishing keys may also lead to a ban either temporary or permanent. This will be at the moderators discretion
Thanks for looking


Nano

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Bigmaq Toolbar LATEST KEYS by jimbo

please google chatterboxcc toolbar install it on ur p.c. and the keys are updated quite quickly to it, u may have to refresh to see latest keys.
My edit: Updated toolbar name

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Ronsters Quick fix for updating keys by Ronster

its been posted around the forum but people aren’t sure what goes in the provider box

press menu-yellow

3 lines will appear
provider
ntl-5401
tw-5a01
ex cw-5c01
enter the keys were it says
key 00 ** ** ** ** ** ** ** **
key 01 ** ** ** ** ** ** ** **
then do a google and download bigmaq toolbar for the latest keys for your provider

if your not sure of your ex provider check here List of Net Id's for Cable TV

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Lincsat's Nick-nacks (Shop) by Lincsat

Due to demand, I've decided to sell a few bits on here for our members.

See this thread for further details - Lincsat's Nick-nacks (Shop)

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Read First - BEFORE asking for help! By Brian

You're much more likely to get an answer to a tech support question if you take the time to say hi, introduce yourself, and make an effort to take part in the community.

After all, if you can't be bothered to do that, why should anyone be bothered to reply to your questions?

You give a little, you take a little.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Channel lists and frequencies Channel List And Freq (not All Areas England)
CDF files CDF Files for the Eurovox
Net ID's List of Net Id's for Cable TV
NTL Chanels and frequencies All Nthell Channels & Frequencies (ireland)

Just wondering would it better to just give links to every thread instead and unsticky them? That way the person who uploaded the thread shall get the thanks for it as all I did was "merge" all these threads together