sb5101e help

[oshea1987]

hi i have a sb5101e got the jtag and sure i have all the software but just cant seem to get it to connect with all the settings can some one tell me wat files i need and how to just change the mac address with out have to flash the modem with haxoware and so on cheers

[G77]

you really wanna flash the modem with haxorware if you've time. it means that you can simply change the mac with internet explorer.

if you get toms jtag util to detect the flash, your in. pm me if you need a full flash file. i presume its the intel flash chip? there has been a new ST chip shown up recently which some folks have had trouble with.

to use toms jtag, once the flash is detected simply do the following commands (pref without verify checked).....

ldram flash

(browse to file)

program flash

(wait 45mins for it to write it to the chip)

[oshea1987]

Originally Posted by G77

you really wanna flash the modem with haxorware if you've time. it means that you can simply change the mac with internet explorer.

if you get toms jtag util to detect the flash, your in. pm me if you need a full flash file. i presume its the intel flash chip? there has been a new ST chip shown up recently which some folks have had trouble with.

to use toms jtag, once the flash is detected simply do the following commands (pref without verify checked).....

ldram flash

(browse to file)

program flash

(wait 45mins for it to write it to the chip)

Jtag Engine initiated Successfully
BlackCat plugin services started.....
0: NULL plugin created
loading plugins from C:\Program Files\TCNiSO\Blackcat\plugins\
2:8192: [EJTAG] loaded from C:\Program Files\TCNiSO\Blackcat\plugins\ejtag.dll
3:655360: [FlashPlugin] loaded from C:\Program Files\TCNiSO\Blackcat\plugins\flashpi.dll
4:16384: [PCPARPORT] loaded from C:\Program Files\TCNiSO\Blackcat\plugins\pcparport_win32.dll
5:4096: [JTAG] loaded from C:\Program Files\TCNiSO\Blackcat\plugins\pptap1.dll
Link Success /BlackCat/EJTAG:1<->/BlackCat/JTAG
Link Success /BlackCat/JTAG:1<->/BlackCat/PCPARPORT
Link Success /BlackCat/FlashPlugin:1<->/BlackCat/MEMORY
6 plugins loaded
0xffffffff = -1
Cannot find manufacturer (Manu 7ff, Part 7fff)
19 flash ic's in the database
Detecting Flash...

then all i get is jtag cable is not connected got the jtag from a a mate how makes them and tests them after he has made it and he made me one for the motorola with ten pin headers

[G77]

is that with the blackcat software?

trooperlee has a similar problem, well, not similar, identical. he traced the wires from pin to pin and there not right.

[oshea1987]

Originally Posted by G77

is that with the blackcat software?

trooperlee has a similar problem, well, not similar, identical. he traced the wires from pin to pin and there not right.

yea thats with blackcat software
i have checked jtag wires look good no lose ones and ma mate said he had checked it and it was workin before i got it so not sure wats goin on lol

[oshea1987]

so any one got any ideas cheers

[G77]

use toms jtag

[oshea1987]

Originally Posted by G77

use toms jtag

hi used that and am getting nothing at all with that not even sayin it is not connected or nothing at all so anything else i can do could it have any thing to do with the jtag header not soldered good enough or anything like that any help would be great thanks first modem and getting that annoyed with it i hope this will be my last lol

[joecee1987]

you havent soldered the wires to the correct pin head check them over again and correct any mistake you may have made or make sure you are putting the jtag onto the modem board correctly.