firmware probs - Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums

ellismuirhack · 27-08-09, 01:26 PM

hi all can smeone please give me the proper firmware for a blue clone tryed every one from the toolbar in the last 12 months no joy stays on until i touch remote then bingo back to square 1

bannon1975 · 28-08-09, 10:21 AM

check your Private messages. Also silly question but does your remote actually work?? my first remote for the eurovox was gubbed and everytime i tried to use it with that it just flaked out.

ellismuirhack · 01-09-09, 01:47 PM

tried them all still crashing must be someonne out there with the same prob im in glasgow

smoggy · 01-09-09, 03:52 PM

have you used EVMAX_BLUE_011208_CORE_140207_CLONESAFE.zip
and what do you mean by "stays on until i touch remote then bingo back to square 1"
does the box work if you use the controls on front of box

ellismuirhack · 03-09-09, 01:04 PM

tryed both box working perfectly with codes in manualy its when i load firmware i get 3031 no chanels and the music sheet for the radio on screen very time consuming.

smoggy · 03-09-09, 04:24 PM

if your box is a clone then only the clonesafe firmware will work, any other firmware knocks out the scart output, so it appears that your remote is not working because you can't see anything changing on the TV screen,
if this is the case then
disconnect your scart
connect some coax cable from the TV / VCR socket of the eurovox to the TV
tune your telly to the VCR channel where you will get the 'enter pin' screen
using your remote enter the master pin which is 1004.
go to menu and clear data, then do a factory reset.
plug your scart back in and do a powerscan as normal or reflash the box with EVMAX_BLUE_011208_CORE_140207_CLONESAFE.zip

ellismuirhack · 04-09-09, 01:33 PM

did all you asked guys back to square 1 put in firmware 2007 did scan all back on exept ppv input codes manualy all ppv chanels on so i guess i will leave it unless some good soul can pm me a couple of firmwares that you think may work but ta for all your help.

smoggy · 04-09-09, 01:49 PM

I would have expected the clonesafe version to work OK only thing I could suggest is to try downloading it again from a different source
the main thing is you can get by for now so alls not lost

ellismuirhack · 04-09-09, 04:43 PM

what source would that be.

smoggy · 04-09-09, 06:04 PM

I don't know where you got your first one from but you can get the clonesafe version from the chatterbox or DeJavu toolbars
if you've downloaded from here then download it again as you may have had a bad download.

27-08-09, 01:26 PM	#1 (permalink)
ellismuirhack Member Join Date: Nov 2008 Posts: 54 Thanks: 17 Thanked 2 Times in 2 Posts	firmware probs hi all can smeone please give me the proper firmware for a blue clone tryed every one from the toolbar in the last 12 months no joy stays on until i touch remote then bingo back to square 1

28-08-09, 10:21 AM	#2 (permalink)
bannon1975 Member Join Date: Aug 2009 Location: Hamilton Posts: 74 Thanks: 6 Thanked 13 Times in 13 Posts	Re: firmware probs check your Private messages. Also silly question but does your remote actually work?? my first remote for the eurovox was gubbed and everytime i tried to use it with that it just flaked out.

01-09-09, 01:47 PM	#3 (permalink)
ellismuirhack Member Join Date: Nov 2008 Posts: 54 Thanks: 17 Thanked 2 Times in 2 Posts	Re: firmware probs tried them all still crashing must be someonne out there with the same prob im in glasgow

01-09-09, 03:52 PM	#4 (permalink)
smoggy Senior Member Join Date: Apr 2008 Location: North East England Posts: 2,780 Thanks: 240 Thanked 882 Times in 792 Posts	Re: firmware probs have you used EVMAX_BLUE_011208_CORE_140207_CLONESAFE.zip and what do you mean by "stays on until i touch remote then bingo back to square 1" does the box work if you use the controls on front of box

03-09-09, 01:04 PM	#5 (permalink)
ellismuirhack Member Join Date: Nov 2008 Posts: 54 Thanks: 17 Thanked 2 Times in 2 Posts	Re: firmware probs tryed both box working perfectly with codes in manualy its when i load firmware i get 3031 no chanels and the music sheet for the radio on screen very time consuming.

03-09-09, 04:24 PM	#6 (permalink)
smoggy Senior Member Join Date: Apr 2008 Location: North East England Posts: 2,780 Thanks: 240 Thanked 882 Times in 792 Posts	Re: firmware probs if your box is a clone then only the clonesafe firmware will work, any other firmware knocks out the scart output, so it appears that your remote is not working because you can't see anything changing on the TV screen, if this is the case then disconnect your scart connect some coax cable from the TV / VCR socket of the eurovox to the TV tune your telly to the VCR channel where you will get the 'enter pin' screen using your remote enter the master pin which is 1004. go to menu and clear data, then do a factory reset. plug your scart back in and do a powerscan as normal or reflash the box with EVMAX_BLUE_011208_CORE_140207_CLONESAFE.zip

04-09-09, 01:33 PM	#7 (permalink)
ellismuirhack Member Join Date: Nov 2008 Posts: 54 Thanks: 17 Thanked 2 Times in 2 Posts	Re: firmware probs did all you asked guys back to square 1 put in firmware 2007 did scan all back on exept ppv input codes manualy all ppv chanels on so i guess i will leave it unless some good soul can pm me a couple of firmwares that you think may work but ta for all your help.

04-09-09, 01:49 PM	#8 (permalink)
smoggy Senior Member Join Date: Apr 2008 Location: North East England Posts: 2,780 Thanks: 240 Thanked 882 Times in 792 Posts	Re: firmware probs I would have expected the clonesafe version to work OK only thing I could suggest is to try downloading it again from a different source the main thing is you can get by for now so alls not lost

04-09-09, 04:43 PM	#9 (permalink)
ellismuirhack Member Join Date: Nov 2008 Posts: 54 Thanks: 17 Thanked 2 Times in 2 Posts	Re: firmware probs what source would that be.

04-09-09, 06:04 PM	#10 (permalink)
smoggy Senior Member Join Date: Apr 2008 Location: North East England Posts: 2,780 Thanks: 240 Thanked 882 Times in 792 Posts	Re: firmware probs I don't know where you got your first one from but you can get the clonesafe version from the chatterbox or DeJavu toolbars if you've downloaded from here then download it again as you may have had a bad download.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Accidentally flashed Ambit cablem modem with DD-WRT router firmware, please help!	schismoid	Cable Modems	1	25-08-09 09:33 PM
sv4 firmware updates - nfo & probs?	uk_dan2k	Starview	2	02-07-09 01:13 PM
Eurovox Max V pre firmware update advice please.	aliciac	Eurovox	64	21-01-09 10:36 PM
Firmware probs with Max v?	shaundu	Eurovox	7	01-12-08 08:19 PM
Firmware update probs	winka	Eurovox	3	26-06-08 12:23 PM