eurovox help please

[tj25]

hi all i bought a eurovox a few mths ago all was fine till lost all chanels did a scan and found nothing after browseing around i downloaded a update via null cable and now wish i hadt !! my box has gone of completely no power lights no disply nothing , i have unpluged and still no luck any help please .tom

[abbs2002]

Originally Posted by tj25

hi all i bought a eurovox a few mths ago all was fine till lost all chanels did a scan and found nothing after browseing around i downloaded a update via null cable and now wish i hadt !! my box has gone of completely no power lights no disply nothing , i have unpluged and still no luck any help please .tom

Fist of all you could have started with saying hello to the forum, since it is your first post, then check your box to see if it’s the original or a clone, you most probably flashed your box with wrong flash i.e if your box was close and you flashed it with the software for the original box that will kill your box.

[abbs2002]

Eurovox Flashing
Clone eurovox max and eurovox 1 + 2


This is the old Dnupman way of flashing and should now only be used on clone eurovox max and eurovox 1 + 2

1.connect your box to pc and power up (your pc wont detect the box yet)
2.open Dnupman
3.click on browse and locate your firmware
4.click on download and Dnupman will start checking your com ports for a eurovox
5.when its found your box click start to send the firmware
6.it should now start downloading and should take approx 3 mins to flash
7.when download is finished it might say download failed but should jump to download successfull straight away.
That’s it done! Any problems I will try to help you with but you won’t (shouldn’t) have any!!

Original

upload your channel data first and save to desktop or you will have to do a fresh scan
If your not sure which box yours is blue or red look at the box from above and you will
see the tuner on the right where the cable feed goes in.
The blue 06 box tuner will measure 12 slots in the grill/slots and the red 07 will measure 8 slots.
1. Connect your box to pc with the rs232 ports using a null modem cable.
2. Plug your box in, it doesn’t matter if its in standby.
3. Open the new firmware and click on download and it will search you ports for a eurovox
once found click ok and it will start to download, takes about 3min that’s it, really it’s that simple.

[tj25]

oops sorry bit late but hello all
how can i tell if it is a original or clone and if i have killed it is there anything i can do to make it live again
thks tom

[abbs2002]

Originally Posted by tj25

oops sorry bit late but hello all
how can i tell if it is a original or clone and if i have killed it is there anything i can do to make it live again
thks tom

open your box and have a good look at those pictures above.

[tj25]

hi ok had a good look the grill/slots measure 8 slots ,
pics look more like original than clone but the big chip in the centre on mine has a silver ali plate on it is this normal for a original
thks
tom

[abbs2002]

Originally Posted by tj25

hi ok had a good look the grill/slots measure 8 slots ,
pics look more like original than clone but the big chip in the centre on mine has a silver ali plate on it is this normal for a original
thks
tom

I think that is a clone m8, clone comes with heatsink take a look at this thread;

How To Differentiate A Genuine & Clone Eurovox EX5000 PVR's - [Working]

[tj25]

well i was happy for 5mins , can i do anything to get it going again ?
thks
tom

[abbs2002]

Originally Posted by tj25

well i was happy for 5mins , can i do anything to get it going again ?
thks
tom

I don't have 1 of those boxes m8, but if I were you I'll try to flash it with righ flash and see how it goes, nornmally the clones die once you flash them with the wrong flash but you have nothing to loose try to find the right flash for it and have a go m8.

[tj25]

ok cheers for your help mate ,
il post back with any results
thks
tom