S/a 2100's help using jtag utility - Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums

fnr3master · 07-09-09, 05:22 PM

ALRIGHT CHAPS IAM TRYING TO FLASH X2 S/A 2100'S WITH JTAG UTILITY ONE HAS A SAMSUNG AND THE OTHER A MX CHIP.

IVE GOT THE CORRECT TYPE LEAD AND HAVE USED IT A LONG TIME AGO AND HAVE FLASHED THEM OK IN THE PAST.

MY PROBLEM IS I CANT GET THESE 2 TO FLASH, IAM TRYING TO PUT HAXO 11REV31 OR 32 ON THEM IT WHEN I FLASH THEM, ITS SAYS FLASH COMPLETED BUT THEN WHEN I REBOOT THEM ALL I GET IS THE P.C LIGHT GIVING ME A SLOW BLINK AND NO OTHER LIGHTS, ALSO I CANT ACCESS THE 192.100...... WEB GUI PAGE.

THE COMMANDS I USED TO FLASH THEM ARE

DETECT
GETRAM 9FC00000 200000
SAVE 9FC00000 200000
AND SAVE MY 2MB BACK UP

THEN I FLASH WITH THE COMMANDS

DETECT
LDRAM 9FC10000
SELECT MY BIN FILE OF HAXO IN THE DIALOG BOX
PROGRAM 9FC10000 130000

AND LET IT FLASH, ALSO I UNTICK VERIFY DATA, AFTER 30 MINS IT SAYS FLASH SUCCESFULL BUT WHEN I TRY THE MODEM ITS JUST DEAD.
I CAN STILL DETECT THEM FINE USING JTAG UTILITY.

SO I WAS JUST WONDERING IF THERE IS ANOTHER SET OF COMMANDS I COULD TRY, AND DOES IT NEED A BOOTLOADER FILE ADDING TO IT AFTER THE FLASH , ITS BEEN A WHILE SINCE I LAST DONE ONE SO I MIGHT BE MISSING SOME THINK, THANKS FOR READING MY RAMBLE AND ANY HELP WOULD BE GREAT

OH IF IT DID NEED A BOOTLOADER WOT COMMANDS WOT I NEED TO IMPUT .

abu baniaz · 07-09-09, 08:46 PM

Are you flashing a 2mb dump or the 1155 one?

fnr3master · 07-09-09, 09:17 PM

i just checked the file size it is 1.12mb

abu baniaz · 08-09-09, 05:03 AM

Try the 2mb dumps, I use the one Fitz did. Please note that commands will be different.

fnr3master · 08-09-09, 07:02 PM

Quote:

Originally Posted by abu baniaz

Try the 2mb dumps, I use the one Fitz did. Please note that commands will be different.

alright m8 can u point me in the right direction for the 2mb dump i can only seem to find the other 1.12mb file

abu baniaz · 08-09-09, 08:17 PM

downloads folder, haxorware,fourth one down ending with a "d".

fnr3master · 09-09-09, 11:32 AM

thanks for the info abu m8, very greatful for your help, ive got the file and will try it later when i get some time

G77 · 09-09-09, 11:42 AM

yeah, flash full 2mb flash

ld ram flash
program flash

simples

fnr3master · 09-09-09, 01:15 PM

Quote:

Originally Posted by G77

yeah, flash full 2mb flash

ld ram flash
program flash

simples

do i just put in ldram flash, instead of putting in ldram 9fc00000 and the same for program.
and is it best to tick or untick verify data.

weebz · 09-09-09, 01:42 PM

un tick and its just ladram flash then programme flash

07-09-09, 05:22 PM	#1 (permalink)
fnr3master TRAIN HARD, FIGHT EASY Join Date: Apr 2008 Posts: 876 Thanks: 228 Thanked 200 Times in 177 Posts	S/a 2100's help using jtag utility ALRIGHT CHAPS IAM TRYING TO FLASH X2 S/A 2100'S WITH JTAG UTILITY ONE HAS A SAMSUNG AND THE OTHER A MX CHIP. IVE GOT THE CORRECT TYPE LEAD AND HAVE USED IT A LONG TIME AGO AND HAVE FLASHED THEM OK IN THE PAST. MY PROBLEM IS I CANT GET THESE 2 TO FLASH, IAM TRYING TO PUT HAXO 11REV31 OR 32 ON THEM IT WHEN I FLASH THEM, ITS SAYS FLASH COMPLETED BUT THEN WHEN I REBOOT THEM ALL I GET IS THE P.C LIGHT GIVING ME A SLOW BLINK AND NO OTHER LIGHTS, ALSO I CANT ACCESS THE 192.100...... WEB GUI PAGE. THE COMMANDS I USED TO FLASH THEM ARE DETECT GETRAM 9FC00000 200000 SAVE 9FC00000 200000 AND SAVE MY 2MB BACK UP THEN I FLASH WITH THE COMMANDS DETECT LDRAM 9FC10000 SELECT MY BIN FILE OF HAXO IN THE DIALOG BOX PROGRAM 9FC10000 130000 AND LET IT FLASH, ALSO I UNTICK VERIFY DATA, AFTER 30 MINS IT SAYS FLASH SUCCESFULL BUT WHEN I TRY THE MODEM ITS JUST DEAD. I CAN STILL DETECT THEM FINE USING JTAG UTILITY. SO I WAS JUST WONDERING IF THERE IS ANOTHER SET OF COMMANDS I COULD TRY, AND DOES IT NEED A BOOTLOADER FILE ADDING TO IT AFTER THE FLASH , ITS BEEN A WHILE SINCE I LAST DONE ONE SO I MIGHT BE MISSING SOME THINK, THANKS FOR READING MY RAMBLE AND ANY HELP WOULD BE GREAT OH IF IT DID NEED A BOOTLOADER WOT COMMANDS WOT I NEED TO IMPUT .

07-09-09, 08:46 PM	#2 (permalink)
abu baniaz Senior Member Join Date: Nov 2008 Posts: 186 Thanks: 73 Thanked 27 Times in 25 Posts	Re: S/a 2100's help using jtag utility Are you flashing a 2mb dump or the 1155 one?

07-09-09, 09:17 PM	#3 (permalink)
fnr3master TRAIN HARD, FIGHT EASY Join Date: Apr 2008 Posts: 876 Thanks: 228 Thanked 200 Times in 177 Posts	Re: S/a 2100's help using jtag utility i just checked the file size it is 1.12mb

08-09-09, 05:03 AM	#4 (permalink)
abu baniaz Senior Member Join Date: Nov 2008 Posts: 186 Thanks: 73 Thanked 27 Times in 25 Posts	Re: S/a 2100's help using jtag utility Try the 2mb dumps, I use the one Fitz did. Please note that commands will be different.

08-09-09, 08:17 PM	#6 (permalink)
abu baniaz Senior Member Join Date: Nov 2008 Posts: 186 Thanks: 73 Thanked 27 Times in 25 Posts	Re: S/a 2100's help using jtag utility downloads folder, haxorware,fourth one down ending with a "d".

09-09-09, 11:32 AM	#7 (permalink)
fnr3master TRAIN HARD, FIGHT EASY Join Date: Apr 2008 Posts: 876 Thanks: 228 Thanked 200 Times in 177 Posts	Re: S/a 2100's help using jtag utility thanks for the info abu m8, very greatful for your help, ive got the file and will try it later when i get some time

09-09-09, 11:42 AM	#8 (permalink)
G77 Super Moderator Join Date: May 2008 Posts: 6,118 Thanks: 695 Thanked 1,250 Times in 1,044 Posts	Re: S/a 2100's help using jtag utility yeah, flash full 2mb flash ld ram flash program flash simples __________________ 1M Motorised Dish, 45W-36E, DM800HD. Quad LNB Mesh Mini Dish, 28.2E, DM500, TM500. Samsung Galaxy S GT-I9000 XXJVU & CF-Root.

09-09-09, 01:42 PM	#10 (permalink)
weebz Senior Member Join Date: May 2008 Posts: 817 Thanks: 30 Thanked 131 Times in 100 Posts	Re: S/a 2100's help using jtag utility un tick and its just ladram flash then programme flash

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Toms jtag utility	Trooperlee	Cable Modems	5	25-08-09 12:37 PM
Tom JTAG utility error	Trooperlee	Cable Modems	27	22-08-09 02:10 AM
Tom's Jtag Utility	jse	Cable Modems	4	04-08-09 07:30 AM
JTag Utility	m r mawdsley	Cable Modems	5	15-05-09 07:22 AM
jtag utility	fnr3master	Cable Modems	9	04-03-09 09:16 PM