Power and ENET Light NTL 250 - Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums

dylanwilliamson · 15-09-09, 06:51 PM

Hello Guys,

I have an NTL 250 modem and was all working fine. Until one day i switched it on and the Power and the ENET light was staying on. I then tried to get into the haxorware admin but wouldnt let me, the modem wasnt getting an ip address just came up limited connectivity. I then tried to flash the modem again useing Hyperterminal but im not getting the P option. I tried a tutorial for getting around this but it didnt seem to work. Just wondering if anyone has any ideas?

Thanks Alot

/24 · 15-09-09, 09:02 PM

Is the enet light flashing slowly? if it is then you have a brick im afraid as far as flashing it again so long as your seeing output in HT then it isn't bricked but you will need to restore the p option using console unlocker and soft jtag or amchobit.

To confirm 100% that your modem isn't working as it should remove the coax cable then connect an ethernet cable to your PC set your pc to a static ip of 192.168.100.10/24
dont worry about the default gateway and then see if you can open up a connection to 192.168.100.1

G77 · 15-09-09, 09:05 PM

how do we do it with amchobit? would be really good to have an alternative to softjtag

/24 · 15-09-09, 10:21 PM

open up amchobit and connect using a 232 interface then just hit the flash bootloader button read the warning and hit ok no need to give it any files or anything it has the bootloader coded in

15-09-09, 06:51 PM	#1 (permalink)
dylanwilliamson Junior Member Join Date: Oct 2008 Posts: 1 Thanks: 0 Thanked 0 Times in 0 Posts	Power and ENET Light NTL 250 Hello Guys, I have an NTL 250 modem and was all working fine. Until one day i switched it on and the Power and the ENET light was staying on. I then tried to get into the haxorware admin but wouldnt let me, the modem wasnt getting an ip address just came up limited connectivity. I then tried to flash the modem again useing Hyperterminal but im not getting the P option. I tried a tutorial for getting around this but it didnt seem to work. Just wondering if anyone has any ideas? Thanks Alot

15-09-09, 09:02 PM	#2 (permalink)
/24 Senior Member Join Date: Apr 2009 Posts: 417 Thanks: 39 Thanked 94 Times in 82 Posts	Re: Power and ENET Light NTL 250 Is the enet light flashing slowly? if it is then you have a brick im afraid as far as flashing it again so long as your seeing output in HT then it isn't bricked but you will need to restore the p option using console unlocker and soft jtag or amchobit. To confirm 100% that your modem isn't working as it should remove the coax cable then connect an ethernet cable to your PC set your pc to a static ip of 192.168.100.10/24 dont worry about the default gateway and then see if you can open up a connection to 192.168.100.1

15-09-09, 09:05 PM	#3 (permalink)
G77 Super Moderator Join Date: May 2008 Posts: 6,118 Thanks: 695 Thanked 1,250 Times in 1,044 Posts	Re: Power and ENET Light NTL 250 how do we do it with amchobit? would be really good to have an alternative to softjtag __________________ 1M Motorised Dish, 45W-36E, DM800HD. Quad LNB Mesh Mini Dish, 28.2E, DM500, TM500. Samsung Galaxy S GT-I9000 XXJVU & CF-Root.

15-09-09, 10:21 PM	#4 (permalink)
/24 Senior Member Join Date: Apr 2009 Posts: 417 Thanks: 39 Thanked 94 Times in 82 Posts	Re: Power and ENET Light NTL 250 open up amchobit and connect using a 232 interface then just hit the flash bootloader button read the warning and hit ok no need to give it any files or anything it has the bootloader coded in