Blanking a tsop with a willem - Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums

blue nose · 16-09-09, 09:28 PM

I must be doing something wrong but when blanking the chip it gets to 16 seconds or 4% then goes of. I have tried it on 7 tsops and its the same with all of them.

Its set up as it is in the tut all the dips and jumpers are right. I am useing 12v psu .....255 I can not do.

G77 · 16-09-09, 09:42 PM

what chipis it? is there a jumper next to the dips?

blue nose · 16-09-09, 09:50 PM

out of the 255s jumper is on 29f

G77 · 16-09-09, 09:52 PM

take it off then

blue nose · 16-09-09, 10:03 PM

Still the same ....was hopeing it would work then lol

G77 · 16-09-09, 10:18 PM

what device have you got willem program set to?

when i've had them where they cant erase or write, i've given the legs another clean and bent them up slightly.

whats it id'ing the chip as?

blue nose · 16-09-09, 10:21 PM

It IDs the chips ok cleaned all the legs with the pen. Its a 4.5 and set to 29LV160.
just been moveing the jumpers around but it still gets to 17 secs.

G77 · 16-09-09, 10:24 PM

and what happens when you do a blank check?

blue nose · 16-09-09, 10:26 PM

beeps and goes off straight away

G77 · 16-09-09, 10:32 PM

lol, annoying isnt it.

keep cleaing the legs and bend them slightly up.

make sure theres no flux on the underside of the pins on the programmer adapter.

if you've got one of them fibreglass things just run that under it and out, obv not side to side.

meths is a good one too, it dissolves the flux. if you have one of those tiny wire brushes, dip it in the meths and draw it out.

i usually drop a bit on the bench and let the chip sit in it for a min or two and then i let it dry itself.

16-09-09, 09:28 PM	#1 (permalink)
blue nose Senior Member Join Date: Feb 2009 Posts: 615 Thanks: 133 Thanked 72 Times in 69 Posts	Blanking a tsop with a willem I must be doing something wrong but when blanking the chip it gets to 16 seconds or 4% then goes of. I have tried it on 7 tsops and its the same with all of them. Its set up as it is in the tut all the dips and jumpers are right. I am useing 12v psu .....255 I can not do. __________________ Dont you just love clowns

16-09-09, 09:42 PM	#2 (permalink)
G77 Super Moderator Join Date: May 2008 Posts: 6,118 Thanks: 695 Thanked 1,250 Times in 1,044 Posts	Re: Blanking a tsop with a willem what chipis it? is there a jumper next to the dips? __________________ 1M Motorised Dish, 45W-36E, DM800HD. Quad LNB Mesh Mini Dish, 28.2E, DM500, TM500. Samsung Galaxy S GT-I9000 XXJVU & CF-Root.

16-09-09, 09:50 PM	#3 (permalink)
blue nose Senior Member Join Date: Feb 2009 Posts: 615 Thanks: 133 Thanked 72 Times in 69 Posts	Re: Blanking a tsop with a willem out of the 255s jumper is on 29f __________________ Dont you just love clowns

16-09-09, 09:52 PM	#4 (permalink)
G77 Super Moderator Join Date: May 2008 Posts: 6,118 Thanks: 695 Thanked 1,250 Times in 1,044 Posts	Re: Blanking a tsop with a willem take it off then __________________ 1M Motorised Dish, 45W-36E, DM800HD. Quad LNB Mesh Mini Dish, 28.2E, DM500, TM500. Samsung Galaxy S GT-I9000 XXJVU & CF-Root.

16-09-09, 10:03 PM	#5 (permalink)
blue nose Senior Member Join Date: Feb 2009 Posts: 615 Thanks: 133 Thanked 72 Times in 69 Posts	Re: Blanking a tsop with a willem Still the same ....was hopeing it would work then lol __________________ Dont you just love clowns

16-09-09, 10:18 PM	#6 (permalink)
G77 Super Moderator Join Date: May 2008 Posts: 6,118 Thanks: 695 Thanked 1,250 Times in 1,044 Posts	Re: Blanking a tsop with a willem what device have you got willem program set to? when i've had them where they cant erase or write, i've given the legs another clean and bent them up slightly. whats it id'ing the chip as? __________________ 1M Motorised Dish, 45W-36E, DM800HD. Quad LNB Mesh Mini Dish, 28.2E, DM500, TM500. Samsung Galaxy S GT-I9000 XXJVU & CF-Root.

16-09-09, 10:21 PM	#7 (permalink)
blue nose Senior Member Join Date: Feb 2009 Posts: 615 Thanks: 133 Thanked 72 Times in 69 Posts	Re: Blanking a tsop with a willem It IDs the chips ok cleaned all the legs with the pen. Its a 4.5 and set to 29LV160. just been moveing the jumpers around but it still gets to 17 secs. __________________ Dont you just love clowns

16-09-09, 10:24 PM	#8 (permalink)
G77 Super Moderator Join Date: May 2008 Posts: 6,118 Thanks: 695 Thanked 1,250 Times in 1,044 Posts	Re: Blanking a tsop with a willem and what happens when you do a blank check? __________________ 1M Motorised Dish, 45W-36E, DM800HD. Quad LNB Mesh Mini Dish, 28.2E, DM500, TM500. Samsung Galaxy S GT-I9000 XXJVU & CF-Root.

16-09-09, 10:26 PM	#9 (permalink)
blue nose Senior Member Join Date: Feb 2009 Posts: 615 Thanks: 133 Thanked 72 Times in 69 Posts	Re: Blanking a tsop with a willem beeps and goes off straight away __________________ Dont you just love clowns

16-09-09, 10:32 PM	#10 (permalink)
G77 Super Moderator Join Date: May 2008 Posts: 6,118 Thanks: 695 Thanked 1,250 Times in 1,044 Posts	Re: Blanking a tsop with a willem lol, annoying isnt it. keep cleaing the legs and bend them slightly up. make sure theres no flux on the underside of the pins on the programmer adapter. if you've got one of them fibreglass things just run that under it and out, obv not side to side. meths is a good one too, it dissolves the flux. if you have one of those tiny wire brushes, dip it in the meths and draw it out. i usually drop a bit on the bench and let the chip sit in it for a min or two and then i let it dry itself. __________________ 1M Motorised Dish, 45W-36E, DM800HD. Quad LNB Mesh Mini Dish, 28.2E, DM500, TM500. Samsung Galaxy S GT-I9000 XXJVU & CF-Root. Last edited by G77; 16-09-09 at 10:35 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
TSOP 56 adapter for willem	blue nose	Cable TV Chat	9	04-08-09 11:21 PM
tsop removal / willem 4.5	anthrax	Cable Modems	7	25-09-08 08:23 PM
In need of help with tsop and willem	bonez	Cable Modems	0	07-09-08 11:40 PM
can i reprogram tsop with willem 3.1 if can you help	caspercarl	Cable Modems	3	05-07-08 01:42 AM