Trouble setting up Haxorware

[RORYSON]

Hello people, got my modem with haxorware. tried setting haxorware but its a nogo, tried and tried and no luck. ive read a few threads and a guide that sum1 wrote but it isnt verry clear. So, could somebody point me to an idiots guide to haxorware or any other form of help. Thanks alot everyone... Son...

[bassethound]

HAXOWARE UNFORCED TUTORIAL

In network connections, set your network adaptor too-

IP Address: 192.168.100.10
Subnet Mask: 255.255.255.0
Gateway: 192.168.100.1
Leave any other settings alone and hit OK

OPEN INTERNET EXPLORER and press 192.168.100.1 in the address bar and it should take you to the Haxorware page to sort out the settings, cool well the settings are as follows-

Configuration:
---------------------

Settings-

General:

Factory Mode - Unticked
Disable Firmware Upgrades - Ticked
Force Network Access - UNTICKED
Tftp Enforce Bypass - ticked
Ignore Unknown Messages-UNTICKED
Disable IP Filters on Startup - ticked

Administration:

Control Panel IP Address - 192.168.100.1
DHCP Server - Ticked
Username - admin (change the password for added security)
Password - admin (change the password for added security)

Press Save

Frequency Settings:

Annex - Both
Plan - European
Preferred DS Freq 1 - 402750000 (this is for NTL), 586750000 (this is for cable and wireless), 331000000 (this is for telewest)
2 and 3 - 0
Upstream channel - dont change (will change on its own)

Press Save

Addresses:

HFC MAC - Your Mac Address
Ethernet Mac - Dont touch
USB MAC - Copy your HFC MAC address, only this time change the last letter/number on it to 1 letter/number higher.
Serial Number - Dont Touch
certificate type - motorola eurodocis

Press Save

Config File: LEAVE EMPTY

Server IP: LEAVE EMPTY


Autoserve disabled
Stored cfg/store new config - no need to do anything here.

Press Save

Baseline Privacy:

BPI disabled

All the rest in the Baseline privacy section will not be touched.

Press Save, basically press save in every page when ever you change settings otherwise they wont stick.

Now put your IP options back to - Obtain IP address Automatically and reb0ot your modem and attach your cable feed.

And that is that, that should be everything done and you should now be able to get online.

This is a general outline of the settings to get you online!

And MACS MACS AND MORE MACS

[RORYSON]

thanks alot m8, all up and running now. your a star...

[funkyfones]

Nice one dude, all good now.

[pierrerol51]

This setting is for Euro.. what is the setting for North America

[50pounds]

Setting up Haxorware

another one here to

[stevie.thai]

hi there bassethound,
do you have a step by step guide for
revision 39 for a complete haxorware
novice ?
many thanks.
stevie.thai