err:00 samsung 2100c - Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums

dave_c · 22-09-09, 06:59 PM

hi guys anyone know wat the above error means

have tried power supply from my working box and put it into the problem box , still getting the er:00 as soon as power is plugged in , also changed the internal battery just in case that was drained .

power supply from faulty box works fine in my working box

any other ideas on wat to try next

andyd76 · 22-09-09, 11:12 PM

Check that you've cleaned all the solder off if you soldered a jtag lead for the bk...just a stab in the dark!

dannyt0812 · 22-09-09, 11:32 PM

er:00 usually means the ram is nackered which aint good.

Im afraid ive had two boxes do exactly the same now and so far not managed to come up with a fix at all.

Some people have reported a fix by soldering a new battery and tuner to the board.
Didn't work for me but suppose its worth a try.

Good luck

LindseyTantrum · 23-02-10, 10:27 PM

Does anyone know how to fix this problem?

I was jtagging my samsung 2100C (with a pogo so no soldering). After connecting the power supply, the display come up with er:00.

I've tried holding the standby, left, right and ok buttons but no joy. The caps all look ok.

I've been searching the internet for hours now but doesn't seem to be a solution. Is my box knackered?

22-09-09, 06:59 PM	#1 (permalink)
dave_c Member Join Date: Jun 2008 Location: northants Posts: 54 Thanks: 5 Thanked 12 Times in 12 Posts	err:00 samsung 2100c hi guys anyone know wat the above error means have tried power supply from my working box and put it into the problem box , still getting the er:00 as soon as power is plugged in , also changed the internal battery just in case that was drained . power supply from faulty box works fine in my working box any other ideas on wat to try next

22-09-09, 11:12 PM	#2 (permalink)
andyd76 Member Join Date: Jul 2008 Posts: 82 Thanks: 15 Thanked 7 Times in 6 Posts	Re: err:00 samsung 2100c Check that you've cleaned all the solder off if you soldered a jtag lead for the bk...just a stab in the dark!

22-09-09, 11:32 PM	#3 (permalink)
dannyt0812 'The Don' Join Date: Oct 2008 Location: Stockport Posts: 392 Thanks: 62 Thanked 73 Times in 64 Posts	Re: err:00 samsung 2100c er:00 usually means the ram is nackered which aint good. Im afraid ive had two boxes do exactly the same now and so far not managed to come up with a fix at all. Some people have reported a fix by soldering a new battery and tuner to the board. Didn't work for me but suppose its worth a try. Good luck __________________ Good things come to those who wait........ so be patient!

23-02-10, 10:27 PM	#4 (permalink)
LindseyTantrum Junior Member Join Date: Sep 2008 Posts: 1 Thanks: 0 Thanked 0 Times in 0 Posts	Re: err:00 samsung 2100c Does anyone know how to fix this problem? I was jtagging my samsung 2100C (with a pogo so no soldering). After connecting the power supply, the display come up with er:00. I've tried holding the standby, left, right and ok buttons but no joy. The caps all look ok. I've been searching the internet for hours now but doesn't seem to be a solution. Is my box knackered?