Flashing 5101E Modem with Haxorware using Win 7 - Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums

seanyboy · 03-10-09, 07:57 PM

Noob here!

Hello. I'm trying to flash my 5101E using the Haxorware instructions.

I've soldered the 10 pins and have the jtag connected to the computer, with the ethernet connection and power on.

I can change the nic card without problems, but on the next stage where I am supposed to start the tftp server, it won't start.

Any help would be gratefully appreciated!

BL4K3Y · 03-10-09, 10:35 PM

Why are you using TFTPD32 if you soldered a JTAG pin header? I used Schartzekat (or however it's spelt) to flash my SB5101. Tom's JTag Utility also works but I can't remember the commands.

seanyboy · 03-10-09, 10:56 PM

Did I not need to solder the pins then, if using the Haxorware?

ratcatcher · 03-10-09, 11:38 PM

yeah but not to flash it just to revive if bricked max232 to flash and use tftp

seanyboy · 04-10-09, 12:07 AM

Oh well, I guess they're there now for the proverbial "rainy day" then.

I thought it might have been something to do with using Win 7, so I went back to Vista on my system.

So when I flash the modem, I don't need to have it attached to the com1 port then? Can I just have it hooked up to the ethernet cable with the power on, and follow the haxorware instructions?

ratcatcher · 04-10-09, 12:10 AM

i have never done a surfboard modem but i would of thoughtyou connect the max 232 up through the com port m8

seanyboy · 04-10-09, 12:17 AM

For some rean though, my TFTP server doesn't want to start though. Do I need to ensure the ECP option is activated in the bios?

ratcatcher · 04-10-09, 12:21 AM

m8 everything you need is in the cable guide i can snd u it if u send me an email addy i just dont want to give you duff info m8

seanyboy · 04-10-09, 12:35 AM

Thank you, addy sent.

ratcatcher · 04-10-09, 12:45 AM

did u get them guides m8

03-10-09, 07:57 PM	#1 (permalink)
seanyboy Junior Member Join Date: Sep 2008 Posts: 13 Thanks: 2 Thanked 0 Times in 0 Posts	Flashing 5101E Modem with Haxorware using Win 7 Noob here! Hello. I'm trying to flash my 5101E using the Haxorware instructions. I've soldered the 10 pins and have the jtag connected to the computer, with the ethernet connection and power on. I can change the nic card without problems, but on the next stage where I am supposed to start the tftp server, it won't start. Any help would be gratefully appreciated!

03-10-09, 10:35 PM	#2 (permalink)
BL4K3Y Senior Member Join Date: Apr 2008 Location: Colne, Lancashire Posts: 7,004 Thanks: 247 Thanked 1,319 Times in 1,211 Posts	Re: Flashing 5101E Modem with Haxorware using Win 7 Why are you using TFTPD32 if you soldered a JTAG pin header? I used Schartzekat (or however it's spelt) to flash my SB5101. Tom's JTag Utility also works but I can't remember the commands.

03-10-09, 10:56 PM	#3 (permalink)
seanyboy Junior Member Join Date: Sep 2008 Posts: 13 Thanks: 2 Thanked 0 Times in 0 Posts	Re: Flashing 5101E Modem with Haxorware using Win 7 Did I not need to solder the pins then, if using the Haxorware?

03-10-09, 11:38 PM	#4 (permalink)
ratcatcher Senior Member Join Date: Apr 2009 Posts: 563 Thanks: 281 Thanked 93 Times in 85 Posts	Re: Flashing 5101E Modem with Haxorware using Win 7 yeah but not to flash it just to revive if bricked max232 to flash and use tftp

04-10-09, 12:07 AM	#5 (permalink)
seanyboy Junior Member Join Date: Sep 2008 Posts: 13 Thanks: 2 Thanked 0 Times in 0 Posts	Re: Flashing 5101E Modem with Haxorware using Win 7 Oh well, I guess they're there now for the proverbial "rainy day" then. I thought it might have been something to do with using Win 7, so I went back to Vista on my system. So when I flash the modem, I don't need to have it attached to the com1 port then? Can I just have it hooked up to the ethernet cable with the power on, and follow the haxorware instructions?

04-10-09, 12:10 AM	#6 (permalink)
ratcatcher Senior Member Join Date: Apr 2009 Posts: 563 Thanks: 281 Thanked 93 Times in 85 Posts	Re: Flashing 5101E Modem with Haxorware using Win 7 i have never done a surfboard modem but i would of thoughtyou connect the max 232 up through the com port m8

04-10-09, 12:17 AM	#7 (permalink)
seanyboy Junior Member Join Date: Sep 2008 Posts: 13 Thanks: 2 Thanked 0 Times in 0 Posts	Re: Flashing 5101E Modem with Haxorware using Win 7 For some rean though, my TFTP server doesn't want to start though. Do I need to ensure the ECP option is activated in the bios?

04-10-09, 12:21 AM	#8 (permalink)
ratcatcher Senior Member Join Date: Apr 2009 Posts: 563 Thanks: 281 Thanked 93 Times in 85 Posts	Re: Flashing 5101E Modem with Haxorware using Win 7 m8 everything you need is in the cable guide i can snd u it if u send me an email addy i just dont want to give you duff info m8

04-10-09, 12:35 AM	#9 (permalink)
seanyboy Junior Member Join Date: Sep 2008 Posts: 13 Thanks: 2 Thanked 0 Times in 0 Posts	Re: Flashing 5101E Modem with Haxorware using Win 7 Thank you, addy sent.

04-10-09, 12:45 AM	#10 (permalink)
ratcatcher Senior Member Join Date: Apr 2009 Posts: 563 Thanks: 281 Thanked 93 Times in 85 Posts	Re: Flashing 5101E Modem with Haxorware using Win 7 did u get them guides m8

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Haxorware modem will not sync up	badboy_uk	Cable Modems	2	19-06-09 12:19 PM
What you need to know about Up to 8Mb broadband	Realist	Broadband	3	04-03-09 02:13 PM
flashing firmware without null modem	psxpirate2k2	Eurovox	1	30-08-06 11:09 PM
Dun code for windows	Realist	PC Hardware	4	06-03-06 02:36 AM
Unlocking Solutions - What they do with an opinion.	Realist	Unlocking	0	18-09-05 11:38 AM