Haxorware version 1.0rc3

[Skiboy]

Could someone tell me how to upgrade from this version to the new version, it's not working on the firmware update for some reason.

[ant16151189]

thats because you can only use the firmware upgrade when using rev 30 or above.

you will need to do it by ethernet cable


Go to start, connect to, show all connections

Right click on local area connection, then properties.

Then click internet protocol/(tcp/ip) and then properties again


Then change the following

IP Address: 192.168.100.10
Subnet Mask: 255.255.255.0
Gateway: 192.168.100.1
Leave any other settings alone and hit OK.

2. Set up a TFTP server (using solar winds) with haxorware11rev32.bin in its root (same folder)

Once you installed solar winds go to c drive then tftp root

And copy and paste in the folder haxorware11rev32.bin

Then run the tftp server from solar winds

Click file then configure, then highlight tftp root, then click the haxoware11rev32.bin file then click ok.

Then go to file configure, security and click transmit and receive files then click ok

Now just minimise the program.

3. Make sure the haxorware web gui isn't currently open (the internet browser closed)

Now connect modem to pc/laptop by Ethernet cable and don’t have the virgin media fibre optic cable connected to modem,

So just power supply connected to modem and Ethernet from modem to pc

4. Connect to modem with PuTTy,

Set host name (IP) set to IP 192.168.100.1

Telnet highlighted and port set to 23 and click open.

5. Enter your username and password





If after entering username and password loads of frequency starts coming up and going crazy all over screen don’t worry just copy and paste this command in for it to stop

cd \cm_hal
scan_stop
cd \


Then Copy the below command,

cd /ip
ipconfig 1 release
y
dload -i 1 -l -f 192.168.100.10 haxorware11rev32.bin
y
cd /
reset


Then just right click on the PuTTy application window. And paste in the command ( I use ctrl+v)


Haxorware 1.1 should now boot.

to access haxoware setup page go to http://192.168.100.1/

[Skiboy]

cheers mate, worked a treat.

[ant16151189]

no prob i like helping