Willems Programmer Software - Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums

idbeholdl · 05-10-09, 09:15 PM

Hi guys

Picked up a Wilems programmer however it came with no software :@

Would anyone be so kind to point me in the right direction for this? Thank you

Also just to confirm I take both Atmels off the board, drop each into the Willems, on software read and save the cards as a Atmel image and then use BKE 2.2 to read the BKE of the box?

Agains thanks guys!

idbeholdl · 05-10-09, 09:15 PM

Oh and its not the full USB one, it is the one with the 25 pin serial and USB for power

yusuf_gaz · 05-10-09, 09:24 PM

Hi

Take atmels off one at a time read and fit back so you can narrow down if atmels are not fitted correctly.

Will try and upload software and tut or pm your email addy will be easier to attach via email.

Regards

G77 · 05-10-09, 10:13 PM

even thou they id as atmel 1614 or whatever you need to set the willem to 29lv160

idbeholdl · 05-10-09, 10:43 PM

Cheers guys

Looking forward to figuring this one out then move onto the more forfilling stuff like logging and figuring that out like you are G77!

(edit for really bad spelling lol)

blue nose · 06-10-09, 05:01 PM

Just got a 2000 with a 6d 56 card. i will do what gaz said and lift and read the first atmel.
is there a tut on how to set the willem and how to read it with BKE 2.2 cheers.

yusuf_gaz · 06-10-09, 06:58 PM

Hi

I sent him the software and a bit of a tut on setup. Its pretty straight forward to use bke once chips have been read. if you want it pm me your addy.

regards

G77 · 06-10-09, 07:31 PM

lifting one at a time is a nice idea but personally i think both at the same time to ensure your dump is good by making sure ird is right in bke.

the last thing you want to do it solder it back in when you've not read it right

blue nose · 06-10-09, 07:44 PM

Do you save the dumps in hex.

blue nose · 06-10-09, 08:22 PM

I broke a leg off so the box is now scrap....damn

05-10-09, 09:15 PM	#1 (permalink)
idbeholdl Member Join Date: Aug 2008 Posts: 37 Thanks: 3 Thanked 2 Times in 2 Posts	Willems Programmer Software Hi guys Picked up a Wilems programmer however it came with no software :@ Would anyone be so kind to point me in the right direction for this? Thank you Also just to confirm I take both Atmels off the board, drop each into the Willems, on software read and save the cards as a Atmel image and then use BKE 2.2 to read the BKE of the box? Agains thanks guys!

05-10-09, 09:15 PM	#2 (permalink)
idbeholdl Member Join Date: Aug 2008 Posts: 37 Thanks: 3 Thanked 2 Times in 2 Posts	Re: Willems Programmer Software Oh and its not the full USB one, it is the one with the 25 pin serial and USB for power

05-10-09, 09:24 PM	#3 (permalink)
yusuf_gaz Senior Member Join Date: Sep 2008 Posts: 1,964 Thanks: 116 Thanked 623 Times in 525 Posts	Re: Willems Programmer Software Hi Take atmels off one at a time read and fit back so you can narrow down if atmels are not fitted correctly. Will try and upload software and tut or pm your email addy will be easier to attach via email. Regards

05-10-09, 10:13 PM	#4 (permalink)
G77 Super Moderator Join Date: May 2008 Posts: 6,118 Thanks: 695 Thanked 1,250 Times in 1,044 Posts	Re: Willems Programmer Software even thou they id as atmel 1614 or whatever you need to set the willem to 29lv160 __________________ 1M Motorised Dish, 45W-36E, DM800HD. Quad LNB Mesh Mini Dish, 28.2E, DM500, TM500. Samsung Galaxy S GT-I9000 XXJVU & CF-Root.

05-10-09, 10:43 PM	#5 (permalink)
idbeholdl Member Join Date: Aug 2008 Posts: 37 Thanks: 3 Thanked 2 Times in 2 Posts	Re: Willems Programmer Software Cheers guys Looking forward to figuring this one out then move onto the more forfilling stuff like logging and figuring that out like you are G77! (edit for really bad spelling lol)

06-10-09, 05:01 PM	#6 (permalink)
blue nose Senior Member Join Date: Feb 2009 Posts: 615 Thanks: 133 Thanked 72 Times in 69 Posts	Re: Willems Programmer Software Just got a 2000 with a 6d 56 card. i will do what gaz said and lift and read the first atmel. is there a tut on how to set the willem and how to read it with BKE 2.2 cheers. __________________ Dont you just love clowns

06-10-09, 06:58 PM	#7 (permalink)
yusuf_gaz Senior Member Join Date: Sep 2008 Posts: 1,964 Thanks: 116 Thanked 623 Times in 525 Posts	Re: Willems Programmer Software Hi I sent him the software and a bit of a tut on setup. Its pretty straight forward to use bke once chips have been read. if you want it pm me your addy. regards

06-10-09, 07:31 PM	#8 (permalink)
G77 Super Moderator Join Date: May 2008 Posts: 6,118 Thanks: 695 Thanked 1,250 Times in 1,044 Posts	Re: Willems Programmer Software lifting one at a time is a nice idea but personally i think both at the same time to ensure your dump is good by making sure ird is right in bke. the last thing you want to do it solder it back in when you've not read it right __________________ 1M Motorised Dish, 45W-36E, DM800HD. Quad LNB Mesh Mini Dish, 28.2E, DM500, TM500. Samsung Galaxy S GT-I9000 XXJVU & CF-Root.

06-10-09, 07:44 PM	#9 (permalink)
blue nose Senior Member Join Date: Feb 2009 Posts: 615 Thanks: 133 Thanked 72 Times in 69 Posts	Re: Willems Programmer Software Do you save the dumps in hex. __________________ Dont you just love clowns

06-10-09, 08:22 PM	#10 (permalink)
blue nose Senior Member Join Date: Feb 2009 Posts: 615 Thanks: 133 Thanked 72 Times in 69 Posts	Re: Willems Programmer Software I broke a leg off so the box is now scrap....damn __________________ Dont you just love clowns

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Build your own 256 spi programmer	matthew4321	Cable Modems	9	17-03-10 08:02 AM
Vcp Tutorial.....easy Set Up	spikebaby	Cable TV Chat	12	03-06-09 01:55 PM
building a HTPC - hardcam advice needed	mowax	Cable on PC	5	12-05-09 03:34 AM
programmer software	reddiesel	Cable TV Chat	8	19-05-07 08:38 PM
Unlocking Solutions - What they do with an opinion.	Realist	Unlocking	0	18-09-05 11:38 AM