Wrong BK and IRD - Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums

gufy78 · 18-10-09, 01:26 PM

Hello

I presume I was in pure NTL area and set BKE to Sammy 2100 (Davic)
to get BK and IRD.

I now noticed in the box the Network ID is 41060, which is ex C&W.

Has enyone got JTAG bytes for 3_6 firmware so I can get right stuff?

MANY THANKS

gufy78 · 18-10-09, 02:17 PM

Another problem

I found Jtag bytes for firmware 3_6 in C&W

Now I cannot put my sammy 2100 into debug mode.

Before I pushed and hold DOWN on LP20 till LP40, then screen went black and green standy led.

NOW, then I put and hold DOWN on LP20 till LP40 screen does not go blank.
It chanched PL00 PL15 PL30 PL60, than AP00 to AP52

AM I IN DEBUG MODE?
WHAT HAS CHNGED SINCE YESTERDAY???

River-Rat · 18-10-09, 02:50 PM

ap52? and dont go to ap53 means wrong net id

gufy78 · 18-10-09, 03:11 PM

Hi SEAMOUSE

Thanks for all your help.

The box stops at AP52 when trying to get to debug mode,
otherwise works alright.

The problem was that something change and I cannot get
to debug mode now.

Anyway, I changed JTAG bytes to correct ones to my C&W area
and you know what? I GOT THE SAME IRD and BK as with bytes
from pure NTL
(but still not sure if I was in debug mode to read IRD an BK).

18-10-09, 01:26 PM	#1 (permalink)
gufy78 Junior Member Join Date: Sep 2009 Posts: 22 Thanks: 0 Thanked 0 Times in 0 Posts	Wrong BK and IRD Hello I presume I was in pure NTL area and set BKE to Sammy 2100 (Davic) to get BK and IRD. I now noticed in the box the Network ID is 41060, which is ex C&W. Has enyone got JTAG bytes for 3_6 firmware so I can get right stuff? MANY THANKS

18-10-09, 02:17 PM	#2 (permalink)
gufy78 Junior Member Join Date: Sep 2009 Posts: 22 Thanks: 0 Thanked 0 Times in 0 Posts	Re: Wrong BK and IRD Another problem I found Jtag bytes for firmware 3_6 in C&W Now I cannot put my sammy 2100 into debug mode. Before I pushed and hold DOWN on LP20 till LP40, then screen went black and green standy led. NOW, then I put and hold DOWN on LP20 till LP40 screen does not go blank. It chanched PL00 PL15 PL30 PL60, than AP00 to AP52 AM I IN DEBUG MODE? WHAT HAS CHNGED SINCE YESTERDAY???

18-10-09, 02:50 PM	#3 (permalink)
River-Rat Ex cable guy Join Date: Apr 2007 Posts: 2,780 Thanks: 62 Thanked 385 Times in 281 Posts	Re: Wrong BK and IRD ap52? and dont go to ap53 means wrong net id __________________ 1 meter dish with octo lnb, xtrend et9200HD e2 box, 50inch Panasonic vt30. ps3, lg cinema sound

18-10-09, 03:11 PM	#4 (permalink)
gufy78 Junior Member Join Date: Sep 2009 Posts: 22 Thanks: 0 Thanked 0 Times in 0 Posts	Re: Wrong BK and IRD Hi SEAMOUSE Thanks for all your help. The box stops at AP52 when trying to get to debug mode, otherwise works alright. The problem was that something change and I cannot get to debug mode now. Anyway, I changed JTAG bytes to correct ones to my C&W area and you know what? I GOT THE SAME IRD and BK as with bytes from pure NTL (but still not sure if I was in debug mode to read IRD an BK).