loading kernel/ kein system errors!!!!!

[mikey mike]

after hours and hours f searchiin this forum.. im exhausted....need help..on dbox 2 stuck on loading kernel...and sagem box with kein system.... any 1 plzzzzzzzzzzzzzzzzzzzzzzzzz help.. thanks

[g80878]

Originally Posted by mikey mike

after hours and hours f searchiin this forum.. im exhausted....need help..on dbox 2 stuck on loading kernel...and sagem box with kein system.... any 1 plzzzzzzzzzzzzzzzzzzzzzzzzz help.. thanks

Use ifa ( I , Fooked it , Again software ) , you will need a network cross over cable and i personally use a null modem cable aswell , some internet security can get in the way so disable it first. These boxes are pretty much bullet proof so this should sort your problem

[g80878]

Originally Posted by mikey mike

hi looking for a guide to flash with ifa....
2 boxes one 'kein system error' other stuck on loading kernel error..???

Using IFA to flash the Dbox
Some people prefer to use IFA right from the get go but others use it only in emergencies.
Regardless this program will flash your Dbox from the boot which means if you have any errors
such as the dredded "Kein System" then IFA will sort them.
Before beginning make sure you back up your service.xml and bouquets.xml files if you want to
keep them
1. Make sure your computer is set to the settings given in "First things first, Setting up the PC so
that its ready to communicate with the Dbox"
2. Open IFA at the welcome screen hit "next"
3. Select the Image you wish flashed onto the box by clicking "Scan" and selecting it
4. Select the Network Device you are using to connect to the Dbox. If you have followed my guide
correctly there should only be 1.
5. If you have a Nullmodem Cable you can connect it if you wish but it is not necessary. If you
have one select yes, if you don't select no. then click "start"
6. Turn on your Dbox at the mains. If you had it turned on turn it off (at the mains) then turn it
back on.
7. If you get lucky "flashing" will show on the Dbox screen. If after a few seconds it doesn't turn it
off at the mains.
8. The window should minimize so click on it to get it back. Select the "Settings" tab and change
the IP to 192.168.0.100
9. Click "Start"
10. Turn on your Dbox.
11. It should now come up flashing first time. If it doesn't try turning the dbox off then back on
again a few times. If it doesnt work after a dozen goes start from the beginning as it should really
work first time.
Your box now has a nice image in it, if you backed up your Service and Bouquet files its time to
put them back in via "Now that you have a fresh new image its time to get back your channels
and bouquets that you saved" part of the guide.

[mikey mike]

how do ya set the computer to communicate with the dbox? the connections please in order

[g80878]

Originally Posted by mikey mike

how do ya set the computer to communicate with the dbox? the connections please in order

Come on mate , You have just had it handed to you on a plate , May i suggest you read it carefully again , Learning by your mistakes is half the fun.

[mikey mike]

hi read it and read it again.. managed to get it to 'flashing' another windo pops up...alot of info appears ends wid copy to flash....done.. when reboot box...still da same prob....any sugestions...

[humforce]

Originally Posted by mikey mike

hi read it and read it again.. managed to get it to 'flashing' another windo pops up...alot of info appears ends wid copy to flash....done.. when reboot box...still da same prob....any sugestions...

the sagem can be 1x1 or 2x2 if you use wrong one you end up with kien system.

[mikey mike]

i def know its sagem 1x1 and nokia 2x2...plzz help.. used guide and still da same..nokia flashed and still 'loading kernel' sagem one in 'kein system' ifa wont pick it up..?? plzzz help
thanks

[humforce]

Originally Posted by mikey mike

i def know its sagem 1x1 and nokia 2x2...plzz help.. used guide and still da same..nokia flashed and still 'loading kernel' sagem one in 'kein system' ifa wont pick it up..?? plzzz help
thanks

on the nokia load an older version of sportster image {usualy helps will loading kernal}

the sagem are you sure its a 1x1.

[skywalker111]

Have a look at these two videos it helped me the first time
YouTube - Dbox2 Kein system
over wifi

or
YouTube - dbox2 image flash assistant