4000T in ExC&W area Stoped working! - Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums

humtum · 07-12-09, 04:42 AM

Hello!

4000T was working with ATmega in till yesterday! When I returned home from work the box is not booting up properly! After PACE nothing comes up on the box display just a light and on TV screen comes logo of Telepest loading! My son switched the extention cable off by mistake.

Went in to eng menu and shows signal!

Box was not hit by 3.7 update as it was always left on! but can it be that? Signal shows all green and NetID still same!

Anymore check to be done?

humtum · 07-12-09, 04:38 PM

Anyone in East London area with 4000T?

tdubman · 08-12-09, 10:09 AM

Quote:

Originally Posted by humtum

Anyone in East London area with 4000T?

yea //t// ok in cw but with a rom

rizzla664 · 08-12-09, 10:28 PM

erase the card and rewrite it and try force bootin the box by holding the down button while powering it up. if no joy then reset the box by pulling the red jumper for a few minutes then try again.

tdubman · 08-12-09, 11:52 PM

Quote:

Originally Posted by rizzla664

erase the card and rewrite it and try force bootin the box by holding the down button while powering it up. if no joy then reset the box by pulling the red jumper for a few minutes then try again.

a 4000t will not update in cw mate

mop · 10-12-09, 12:35 AM

Quote:

Originally Posted by tdubman

a 4000t will not update in cw mate

hi m8 would it update if i take it to my frands house who is in tw eara thanks any help will appreciate

tdubman · 10-12-09, 10:13 AM

Quote:

Originally Posted by mop

hi m8 would it update if i take it to my frands house who is in tw eara thanks any help will appreciate

yeh put the correct net id mate for that area

mop · 10-12-09, 06:19 PM

Quote:

Originally Posted by tdubman

yeh put the correct net id mate for that area

thank u very much m8 when it update in TW area then can i put it back to CW area will it work?

sr20 · 10-12-09, 06:36 PM

Quote:

Originally Posted by mop

thank u very much m8 when it update in TW area then can i put it back to CW area will it work?

No mate. Clear the box with the red jumper and set your netID with NetID fun etc. Too much ****ing about going on

All the info given so far has been sh1te tbh

sr20

tdubman · 10-12-09, 07:02 PM

Quote:

Originally Posted by sr20

No mate. Clear the box with the red jumper and set your netID with NetID fun etc. Too much ****ing about going on

All the info given so far has been sh1te tbh

sr20

if it was going to update in cw it would of done already but it cant //because virgin will not send updates to 4000t/s because they should not be there ///if it was a 4000n //no probs //now you are learning //sr20

07-12-09, 04:42 AM	#1 (permalink)
humtum Member Join Date: Apr 2008 Posts: 72 Thanks: 36 Thanked 2 Times in 2 Posts	4000T in ExC&W area Stoped working! Hello! 4000T was working with ATmega in till yesterday! When I returned home from work the box is not booting up properly! After PACE nothing comes up on the box display just a light and on TV screen comes logo of Telepest loading! My son switched the extention cable off by mistake. Went in to eng menu and shows signal! Box was not hit by 3.7 update as it was always left on! but can it be that? Signal shows all green and NetID still same! Anymore check to be done?

07-12-09, 04:38 PM	#2 (permalink)
humtum Member Join Date: Apr 2008 Posts: 72 Thanks: 36 Thanked 2 Times in 2 Posts	Re: 4000T in ExC&W area Stoped working! Anyone in East London area with 4000T?

08-12-09, 10:28 PM	#4 (permalink)
rizzla664 Senior Member Join Date: Jun 2007 Location: west yorkshire Posts: 193 Thanks: 4 Thanked 3 Times in 3 Posts	Re: 4000T in ExC&W area Stoped working! erase the card and rewrite it and try force bootin the box by holding the down button while powering it up. if no joy then reset the box by pulling the red jumper for a few minutes then try again.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
haxorware help	ste0ey	Cable Modems	13	23-04-09 12:57 PM
cable modem box stopped working 14/12/08 ex telewest area) ??	azz4eva	Cable Modems	3	15-12-08 11:10 PM
been away n come bk to a box thtas stoped working	jonboy999	Eurovox	5	02-12-08 04:52 PM
Samsung SMT-2100C working In TELEWEST AREA?	tariqz118	Cable TV Chat	2	30-09-08 06:24 PM
fenrir / yankse stoped working	via	Cable on PC	1	16-03-08 02:08 AM