V+ Help with PIN - Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums

bonez · 10-12-09, 11:43 PM

Hi all

Having read the V+ application, i have all channels and HD working.
But the PIN im having problems with. In the text of the application it says about the AT24C512 chip, to remove and re-programm with all FF, this would then be able to insert NetID and frequency.
Im in t.w Area, and the box has correct NetID ect, as all channels are working.

I prgrammed the Fun with NetID 2.7 correctly, and as per instructions to the box.

But i still cannot get a new pin, ive used up two lives of inserting the pin wrong and have just one left.

Im waiting on Atmega cards to be delivered, can someone help please, what im doing wrong, or does the AT24C512 have to be removed?

Thanks

Rich

bonez · 11-12-09, 11:49 PM

sorted , i wasnt reading enough,

mop · 12-12-09, 12:19 AM

Quote:

Originally Posted by bonez

sorted , i wasnt reading enough,

hi m8 so what did u had to removed? AT24C512 chip or

reddiesel · 12-12-09, 01:49 AM

Iv'e had 3 like that i managed to guess, it locks after 3 goes but opens again after a while.
you can programme it on the chip or if its blank it will be 0000 .

bonez · 13-12-09, 12:37 AM

i didnt remove the chip, i soldered 8 leads out to the programmer, ill then flash with all FF's as per instructions.

@Reddiesel - how do you program the PIN on the chip without blanking it?

reddiesel · 13-12-09, 11:06 AM

Quote:

Originally Posted by bonez

i didnt remove the chip, i soldered 8 leads out to the programmer, ill then flash with all FF's as per instructions.

@Reddiesel - how do you program the PIN on the chip without blanking it?

You cant do it in situ you have to remove it and solder 5 leads, you need the programmer from fleet micro, you can replace with a new blank one and use an atmega card
There is a tut in V-apps and V+ net id dump in downloads, you just edit it for your area with pin.
As far as i know you cant reset just the pin without net id as well.

bonez · 13-12-09, 06:51 PM

@Reddesiel

Thank you for the info,

Can the Willem program the 24C512?

Rich

reddiesel · 13-12-09, 11:12 PM

Im sure you can do it with a willem, someone tried progamming in situ with one of those soic clips and it wouldnt work, cant remember who it was, they may read this and reply.

bonez · 15-12-09, 12:38 AM

>Red, thanks again,

i was going through my proggers last night and found two that would of done the job, that was after i ordered the programmer (+chip) from Fleet

Ah, well another to the collection wont hurt.

Rich

10-12-09, 11:43 PM	#1 (permalink)
bonez Mr Bones @ your service! Join Date: Apr 2008 Location: Bristol Posts: 94 Thanks: 27 Thanked 6 Times in 5 Posts	V+ Help with PIN Hi all Having read the V+ application, i have all channels and HD working. But the PIN im having problems with. In the text of the application it says about the AT24C512 chip, to remove and re-programm with all FF, this would then be able to insert NetID and frequency. Im in t.w Area, and the box has correct NetID ect, as all channels are working. I prgrammed the Fun with NetID 2.7 correctly, and as per instructions to the box. But i still cannot get a new pin, ive used up two lives of inserting the pin wrong and have just one left. Im waiting on Atmega cards to be delivered, can someone help please, what im doing wrong, or does the AT24C512 have to be removed? Thanks Rich __________________ 1M Motorised Dish DiSEqC 1.2/1.3 Usals 120 H-H Motor 0.2DB QUAD UNI LNB DM500 (Jade Pli)

11-12-09, 11:49 PM	#2 (permalink)
bonez Mr Bones @ your service! Join Date: Apr 2008 Location: Bristol Posts: 94 Thanks: 27 Thanked 6 Times in 5 Posts	Re: V+ Help with PIN sorted , i wasnt reading enough, __________________ 1M Motorised Dish DiSEqC 1.2/1.3 Usals 120 H-H Motor 0.2DB QUAD UNI LNB DM500 (Jade Pli)

12-12-09, 01:49 AM	#4 (permalink)
reddiesel Super Moderator Join Date: May 2007 Location: Beds Posts: 5,613 Thanks: 175 Thanked 949 Times in 832 Posts	Re: V+ Help with PIN Iv'e had 3 like that i managed to guess, it locks after 3 goes but opens again after a while. you can programme it on the chip or if its blank it will be 0000 . __________________

13-12-09, 12:37 AM	#5 (permalink)
bonez Mr Bones @ your service! Join Date: Apr 2008 Location: Bristol Posts: 94 Thanks: 27 Thanked 6 Times in 5 Posts	Re: V+ Help with PIN i didnt remove the chip, i soldered 8 leads out to the programmer, ill then flash with all FF's as per instructions. @Reddiesel - how do you program the PIN on the chip without blanking it? __________________ 1M Motorised Dish DiSEqC 1.2/1.3 Usals 120 H-H Motor 0.2DB QUAD UNI LNB DM500 (Jade Pli)

13-12-09, 06:51 PM	#7 (permalink)
bonez Mr Bones @ your service! Join Date: Apr 2008 Location: Bristol Posts: 94 Thanks: 27 Thanked 6 Times in 5 Posts	Re: V+ Help with PIN @Reddesiel Thank you for the info, Can the Willem program the 24C512? Rich __________________ 1M Motorised Dish DiSEqC 1.2/1.3 Usals 120 H-H Motor 0.2DB QUAD UNI LNB DM500 (Jade Pli)

13-12-09, 11:12 PM	#8 (permalink)
reddiesel Super Moderator Join Date: May 2007 Location: Beds Posts: 5,613 Thanks: 175 Thanked 949 Times in 832 Posts	Re: V+ Help with PIN Im sure you can do it with a willem, someone tried progamming in situ with one of those soic clips and it wouldnt work, cant remember who it was, they may read this and reply. __________________

15-12-09, 12:38 AM	#9 (permalink)
bonez Mr Bones @ your service! Join Date: Apr 2008 Location: Bristol Posts: 94 Thanks: 27 Thanked 6 Times in 5 Posts	Re: V+ Help with PIN >Red, thanks again, i was going through my proggers last night and found two that would of done the job, that was after i ordered the programmer (+chip) from Fleet Ah, well another to the collection wont hurt. Rich __________________ 1M Motorised Dish DiSEqC 1.2/1.3 Usals 120 H-H Motor 0.2DB QUAD UNI LNB DM500 (Jade Pli)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
v+ netid pin help	brian0812	Cable TV Chat	5	14-11-09 05:08 PM
Pin Reset? Please Help	dakota999	Other Cable Boxes	6	24-09-09 12:53 PM
pace 4000 pin reset	shanna	Other Cable Boxes	2	04-07-09 11:08 AM
Menu PIN Lock Out on EX7000HD+??..Help	user	Eurovox	2	17-04-09 02:16 PM
parental lock pin number	curtis2007	Eurovox	4	03-12-08 01:04 PM