unlooper problems

[tommyguntattoos]

can anyone help im getting the same problem as the bloke in this post

Up for a challenge ?

this is the second card i cant seem to glitch both from 2110 and both bd3 login failure's if i try and run the mikedata bod script in winexplorer i get the following message

Card Didn't Response Correctly-Please Reset Your Dual Unlooper By The Reset Button Before Starting The Script Again,Or Your Card MayBe Looped-Check In NagraEdit 4.1
Script Will Now Exit..Oh Dear

Script E:\virgin files\Tv\Unlooper Files\Glitching Files\Winex and Scripts\Scripts\MIKEDATA & CHARTMAN A86 AND BOD SCRIPT MAY 2007 A86.xvb Transmission Completed

there must be a way around this can anyone help please.

[Diablo_77]

Im stuck with exactly the same m8 =S

[G77]

use the rom11 unlocker script

[tommyguntattoos]

what rom 11 ??

5401 rom11 boc
5c01 rom11 boc

they are the only 2 i have if its not one of these were can i get the right one.
thanks for reply

[BL4K3Y]

Well what cable area is the card from? 5401 is Pure and 5C01 is Ex C&W .

[tommyguntattoos]

im in a pure area will give it a try and post back.

[tommyguntattoos]

ok i tried that and this is what happened

Executing Script: E:\virgin files\Tv\Unlooper Files\Glitching Files\Winex and Scripts\Scripts\5401 Rom11 BOC.xvb
TX Data : A0
TX Data : A1
TX Data : 07 0E 03 10 01 03 9A 00
RX Data : 06 00
TX Data : 14 03 10 15 AB 21 00 08 A0 CA 00 00 02 12 00 06
55 0E 03 87 00
RX Data : 13 00

Now we will try 16FF delay
TX Data : B0 30
TX Data : 07 0E 03 10 01 03 9A 00
RX Data : 06 00
TX Data : 47 15 E0
TX Data : 21 00 3D A0 CA 00 00 37 03 35 54 01 10 31 05 4E
69 70 50 45 72 20 49 E3 40 7C AD FD B9 64 29 F4
F6 77 C2 35 6D 74 74
TX Data : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 05 CE
TX Data : 0E 05 8A 00
RX Data : 03 00
TX Data : 53 15 E8
TX Data : 21 00 45 A0 D7 10 80 40 66 E1 24 39 14 1A CA A1
C1 D5 E9 B2 9B 68 F8 61 EF 7F 04 3C 26 55 63 F3
37 FE 29 F5 61 DB 8E
TX Data : 17 B5 E1 9B D3 83 99 50 49 EC 66 52 53 E2 81 95
DF 32 90 53 12 C9 95 CE 26 F0
TX Data : D9 26 86 05 BE FE F2 B0 20 16 FF 06 0E 05 85 00
RX Data : 03 00
! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! !

Sc.Read: Timeout Reading Data From Card - 2 Bytes Requested, 0 Bytes Read, Continuing Script
! !

Sc.Read: Timeout Reading Data From Card - 2 Bytes Requested, 0 Bytes Read, Continuing Script
!

Sc.Read: Timeout Reading Data From Card - 2 Bytes Requested, 0 Bytes Read, Continuing Script
! ! ! !

Sc.Read: Timeout Reading Data From Card - 2 Bytes Requested, 0 Bytes Read, Continuing Script

Sc.Read: Timeout Reading Data From Card - 2 Bytes Requested, 0 Bytes Read, Continuing Script


Script Error on Line 174
Sc.GetByte: Requested Byte Exceeds Last Read Request

any ideas ???

[Diablo_77]

Have you tried the Mikedata and chartman script?

[crofty1379]

try sidewinder m8

[tommyguntattoos]

yeah have tried the mikedata/cartman script no luck and sidewinder just closes straight away really is bugging me now there must be a way around this.