ROM 11 REVB0E's got me stumped!!

[freekenstein]

Hi all - just a quick Q. I've been having problems trying to write a new image to my MOSC. Originally before the card went down it was a REVB0D - since then I've tried using two different images one from DD and one from WizM.

When i tried writing to the card i keep on getting the error below.

(**)
Opening of COM1 was successful
ATR String: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50
30 31 31 20 52 65 76 42 30 45 3D
ROM Revision: 011
EEPROM Revision: RevB0E
ProviderID: 81
CamID: 00 00 00 00
Using BD3 Key: 4E 69 70 50 45 72 20 49 73 20 61 20 62 75 54 74
Attempting to login to BD3
BD3 login failed
Reading ROM11 failed
Closing of COM1 was successful

I then used Mrom to clean the backdoor and I was able to read from the card again as below.

Opening of COM1 was successful
ATR String: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50
30 31 31 20 52 65 76 42 30 45 3D
ROM Revision: 011
EEPROM Revision: RevB0E
ProviderID: 40
CamID: 11 11 11 11
Using BD3 Key: 4E 69 70 50 45 72 20 49 73 20 61 20 62 75 54 74
Attempting to login to BD3
BackDoor login verified
Dumping Dataspace
Using BD0 Key: B6 6B 07 66 02 62 39 A6 A4 34 F6 69 50 FE 66 07
Attempting to login to BD3
Attempting to login to BD0
BackDoor login verified
Dumping CodeSpace
Reading ROM11 successful
Card read successfully
Efficiency: 99.3%, Packets: 141, Retries: 1, Time: 17.70s
Closing of COM1 was successful

Trouble is every time a try writing a new image, I keep on getting the message as above (**).

What am I doing wrong??

many thanx

[Jadugar]

NagraEdit is a bitch some times. Try again and again if you know the card is unlocked.

[abbs2002]

Originally Posted by freekenstein

Hi all - just a quick Q. I've been having problems trying to write a new image to my MOSC. Originally before the card went down it was a REVB0D - since then I've tried using two different images one from DD and one from WizM.

When i tried writing to the card i keep on getting the error below.

(**)
Opening of COM1 was successful
ATR String: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50
30 31 31 20 52 65 76 42 30 45 3D
ROM Revision: 011
EEPROM Revision: RevB0E
ProviderID: 81
CamID: 00 00 00 00
Using BD3 Key: 4E 69 70 50 45 72 20 49 73 20 61 20 62 75 54 74
Attempting to login to BD3
BD3 login failed
Reading ROM11 failed
Closing of COM1 was successful

I then used Mrom to clean the backdoor and I was able to read from the card again as below.

Opening of COM1 was successful
ATR String: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50
30 31 31 20 52 65 76 42 30 45 3D
ROM Revision: 011
EEPROM Revision: RevB0E
ProviderID: 40
CamID: 11 11 11 11
Using BD3 Key: 4E 69 70 50 45 72 20 49 73 20 61 20 62 75 54 74
Attempting to login to BD3
BackDoor login verified
Dumping Dataspace
Using BD0 Key: B6 6B 07 66 02 62 39 A6 A4 34 F6 69 50 FE 66 07
Attempting to login to BD3
Attempting to login to BD0
BackDoor login verified
Dumping CodeSpace
Reading ROM11 successful
Card read successfully
Efficiency: 99.3%, Packets: 141, Retries: 1, Time: 17.70s
Closing of COM1 was successful

Trouble is every time a try writing a new image, I keep on getting the message as above (**).

What am I doing wrong??

many thanx

open nagra and clean the card m8 chose full clean, then click on remove card lock, then try to rite to card again.

[clarkyj]

yea do what abbs says, had that prob but that done the trick

[freekenstein]

Guys - thanx for that I've done as suggested and I managed to finally get an image to stick to the card - only prob now is that I get a) randomised channels, i.e. channels are not in order and b) only a handful of channles coming thru - including the terrestrial channels.

Is there another image out there that I need to use or am I still doing something wrong? Incidentally I had to make the cam Id up myself - meaning I just created the numbers for the Id - Is this ok to do?

[abbs2002]

Originally Posted by freekenstein

Guys - thanx for that I've done as suggested and I managed to finally get an image to stick to the card - only prob now is that I get a) randomised channels, i.e. channels are not in order and b) only a handful of channles coming thru - including the terrestrial channels.

Is there another image out there that I need to use or am I still doing something wrong? Incidentally I had to make the cam Id up myself - meaning I just created the numbers for the Id - Is this ok to do?

you can make cam id that's shouldn't be a problem as long as you keep the first 2 digits for your area.
open your card in nagra take a screen shot of tier 8 upload it and we'll have a look m8.

[BL4K3Y]

As abbs said, start with the CAM ID with 24 (Pure), 27 (Ex C&W) or 2C (TW) depending on what cable area you are in.

[freekenstein]

This is what I'm reading from the card now - notice the REV has now reverted back to REVB0D - previously REVB0E

Opening of COM1 was successful
ATR String: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50
30 31 31 20 52 65 76 42 30 44 3C
ROM Revision: 011
EEPROM Revision: RevB0D
ProviderID: 5C
CamID: 27 45 99 56
Using BD3 Key: 4E 69 70 50 45 72 20 49 73 20 61 20 62 75 54 74
Attempting to login to BD3
BackDoor login verified
Dumping Dataspace
Using BD0 Key: CC CC CC CC CC CC CC CC CC CC CC CC CC CC CC CC
Attempting to login to BD3
Attempting to login to BD0
BackDoor login verified
Dumping CodeSpace
Reading ROM11 successful
Card read successfully
Efficiency: 100.0%, Packets: 141, Retries: 0, Time: 20.73s
Closing of COM1 was successful

Incidentally I'm in an ex C&W area

I've attched the first two levels of Tier 8 - thanx guys

[Jadugar]

What is the box that you are using and what software is it on? Should be 3.7.

[freekenstein]

I've attached the pdf version of the screen shot just in case the gif's are a little hard to read..