How do i change net id on Sam 2110c - Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums

Hercules Man · 23-12-09, 12:32 AM

I have got the box into 099999 for net id but need to change it, holding buttons left,right,ok,power, im not sure what to do next, i cannot change the net id manually in the engineer menu, i have tried putting in a fun card made with NetIDv2.1.7.2 and also tried an ATmega but nothing happends apart from some data appears in one of the columns. Any ideas, cheers

H MAn

abbs2002 · 23-12-09, 12:50 AM

Quote:

Originally Posted by Hercules Man

I have got the box into 099999 for net id but need to change it, holding buttons left,right,ok,power, im not sure what to do next, i cannot change the net id manually in the engineer menu, i have tried putting in a fun card made with NetIDv2.1.7.2 and also tried an ATmega but nothing happends apart from some data appears in one of the columns. Any ideas, cheers

H MAn

are you in leeds?

Hercules Man · 23-12-09, 01:08 AM

I think the box was on 41060, now i have got it to 09999 by doing left,right,ok,and power, i insert fun/atmega and nothing happens, im not in Leeds, i need to get the net id to 41048 (Cheshire) The box key/ird seem ok and paired as far as i know.

H MAn

abbs2002 · 23-12-09, 01:16 AM

Quote:

Originally Posted by Hercules Man

I think the box was on 41060, now i have got it to 09999 by doing left,right,ok,and power, i insert fun/atmega and nothing happens, im not in Leeds, i need to get the net id to 41048 (Cheshire) The box key/ird seem ok and paired as far as i know.

H MAn

make sure you net id funcard is correct, check the box key and ird for mistakes, then boot to EM set the freq/pin save them then go to next page and insert the funcard if the box don't boot itself go to following page and pause for 15 sec keep doing that untill the box reboot m8.

Hercules Man · 23-12-09, 01:50 AM

Quote:

Originally Posted by abbs2002

then boot to EM set the freq/pin save.

I have now set the freq/pin, but still nothing happens when i put the fun/atmega in, i checked the ird/bk and they are ok, only thing im thinking is the card is not paired. but the box key seems good, it starts with E6, and there is no reason as to why it might have ended up with an un paired card.

H MAn

abbs2002 · 23-12-09, 01:59 AM

Quote:

Originally Posted by Hercules Man

I have now set the freq/pin, but still nothing happens when i put the fun/atmega in, i checked the ird/bk and they are ok, only thing im thinking is the card is not paired. but the box key seems good, it starts with E6, and there is no reason as to why it might have ended up with an un paired card.

H MAn

did you flick through the pages?

Hercules Man · 23-12-09, 02:11 AM

Yes i went through some pages at least a couple of times with card in, and taking it out and putting it back in on page 2

H MAn

tdubman · 23-12-09, 03:06 AM

is the feed in

Jadugar · 23-12-09, 05:06 AM

As long as the BK and IRD are correct, I see no reason for the box not to reboot/update.

Also when you insert the netid funcard in the box, you can check you see if you have the right details on the card in EM. The netid card's staus will show as "PAIRED".

The feed doesnt have to be in when setting the netid. Its only needed when the box reboots and tries to get the box updated.

Where did you get the BK and IRD from?

23-12-09, 12:32 AM	#1 (permalink)
Hercules Man Member Join Date: Oct 2008 Posts: 35 Thanks: 0 Thanked 0 Times in 0 Posts	How do i change net id on Sam 2110c I have got the box into 099999 for net id but need to change it, holding buttons left,right,ok,power, im not sure what to do next, i cannot change the net id manually in the engineer menu, i have tried putting in a fun card made with NetIDv2.1.7.2 and also tried an ATmega but nothing happends apart from some data appears in one of the columns. Any ideas, cheers H MAn

23-12-09, 01:08 AM	#3 (permalink)
Hercules Man Member Join Date: Oct 2008 Posts: 35 Thanks: 0 Thanked 0 Times in 0 Posts	Re: How do i change net id on Sam 2110c I think the box was on 41060, now i have got it to 09999 by doing left,right,ok,and power, i insert fun/atmega and nothing happens, im not in Leeds, i need to get the net id to 41048 (Cheshire) The box key/ird seem ok and paired as far as i know. H MAn

23-12-09, 02:11 AM	#7 (permalink)
Hercules Man Member Join Date: Oct 2008 Posts: 35 Thanks: 0 Thanked 0 Times in 0 Posts	Re: How do i change net id on Sam 2110c Yes i went through some pages at least a couple of times with card in, and taking it out and putting it back in on page 2 H MAn

23-12-09, 03:06 AM	#8 (permalink)
tdubman ipost what iknow not read Join Date: Jul 2008 Posts: 707 Thanks: 66 Thanked 129 Times in 110 Posts	Re: How do i change net id on Sam 2110c is the feed in

23-12-09, 05:06 AM	#9 (permalink)
Jadugar Senior Member Join Date: Apr 2008 Posts: 185 Thanks: 55 Thanked 28 Times in 26 Posts	Re: How do i change net id on Sam 2110c As long as the BK and IRD are correct, I see no reason for the box not to reboot/update. Also when you insert the netid funcard in the box, you can check you see if you have the right details on the card in EM. The netid card's staus will show as "PAIRED". The feed doesnt have to be in when setting the netid. Its only needed when the box reboots and tries to get the box updated. Where did you get the BK and IRD from?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
atmega to change net i.d	Hennah04	Cable TV Chat	14	02-02-10 10:39 AM
change net id for di4000n	vicz84	Cable TV Chat	5	12-05-09 07:01 PM
unable to change net id from 09999	alder191	Cable TV Chat	6	06-05-09 06:56 PM
Samsung 2110c Net Id	morgan	Other Cable Boxes	4	26-03-09 03:35 PM
net id not changing on samsung 2110c	007paul	Cable TV Chat	22	23-01-09 02:58 PM