eurovox 1 'locked' problem

[DAVIDEK]

I have Eurovox 1 and flashed but I still do have the 'locked' green light on and remote does not work, changing the channels manually.

I do not have the manual and therfore the pin,
if the problem is the sensor(as someone suggested)
any idea please how to solve this?
thanks

[telecom69]

Having the locked light on is normal and you want that to be showing ...the pin is 0000 normally ...best really to try another remote before blaming the sensor,but there have been cases in the past, mainly, when the connections of the sensor to the board were dodgy and resoldering them solved the problem ....

[SpudGun]

Do the camera trick on the remote to check if its working, i just fixed one of these by wedging a tiny piece of card behind the sensor to make a better connection, a soldering iron would be a better choice but mine broke.

[DAVIDEK]

Originally Posted by telecom69

Having the locked light on is normal and you want that to be showing ...the pin is 0000 normally ...best really to try another remote before blaming the sensor,but there have been cases in the past, mainly, when the connections of the sensor to the board were dodgy and resoldering them solved the problem ....

thanks for that
Remote is working well (tryed the camera)

I will try the sensor area again, but seems fine though

PS where Can i get remote and sensor panel (in case)

[SpudGun]

If its the sensor on the box its easy to fix with a soldering iron, just need to resolder the two joints again.