ohm set-up on unlooper b4 flashing - Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums

kkd · 12-01-10, 09:41 PM

I got unlooper which need flashing. My problem is how do I set the ohms to 2.2k with a pocket size tester and lead on the unlooper.
Am very sure had not been mentioned anywhere in the forum b4

blakey_8 · 12-01-10, 09:41 PM

Set it to 2K Ohms and adjust the pot until it hits 0.62 for ROM10s or 0.90 for ROM11s. You may not be able to do it with your tester.

kkd · 12-01-10, 09:55 PM

If I understand u mean I shd continue to flash without setting pot 2.2kohms. But then adjust pot whlie flashing untill it hit .90 for my rom 11.

blakey_8 · 12-01-10, 10:02 PM

No, remove card, power and serial from the unlooper and then set it using the test points. That's the easiest and best way in my opinion.

kkd · 13-01-10, 08:37 PM

Thanx buddy for quick reply.

Is it right to flash the powersync unlooper first then use vccanalyserv2 to set test points? I tried opening dx11 file in winxp but no luck. the file script is empty always. Any advice from forum or direction to tutorial for flashing unlooper. Surprising `ve search but nothing good.

blakey_8 · 13-01-10, 10:36 PM

I don't use VCC Analyzer anymore, I use a multimeter and the test points on the unlooper.

kkd · 13-01-10, 11:34 PM

Quote:

Originally Posted by blakey_8

I don't use VCC Analyzer anymore, I use a multimeter and the test points on the unlooper.

Can you give me an idea how to use the multimetre to set test points. mine comes with 2 progo pins inserted in red and black lead which connects to the metre socket.

blakey_8 · 13-01-10, 11:37 PM

Yes, the two wires are what you need. Set the multimeter to 2K Ohms, put the two wires in the hole and then you should get a reading. DO NOT do this with anything plugged in, not even a card. I know I said this before but if you don't take note, you will damage the unlooper!

kkd · 14-01-10, 12:54 AM

Quote:

Originally Posted by blakey_8

Yes, the two wires are what you need. Set the multimeter to 2K Ohms, put the two wires in the hole and then you should get a reading. DO NOT do this with anything plugged in, not even a card. I know I said this before but if you don't take note, you will damage the unlooper!

I will try 2morrow and post update........

reddiesel · 14-01-10, 03:51 AM

DX11 is the flash for the unlooper it should already be flashed you dont use winex for that, run vcc analyser in winex to set vcc although that should be set near enough also, in your copy of winex click on config and set for my unlooper it should be in the config files, try mike data script for the rom 11.

12-01-10, 09:41 PM	#1 (permalink)
kkd Junior Member Join Date: Dec 2009 Posts: 26 Thanks: 10 Thanked 0 Times in 0 Posts	ohm set-up on unlooper b4 flashing I got unlooper which need flashing. My problem is how do I set the ohms to 2.2k with a pocket size tester and lead on the unlooper. Am very sure had not been mentioned anywhere in the forum b4 Last edited by kkd; 12-01-10 at 09:48 PM.

12-01-10, 09:41 PM	#2 (permalink)
blakey_8 Senior Member Join Date: Apr 2008 Location: Colne, Lancashire Posts: 6,947 Thanks: 245 Thanked 1,312 Times in 1,205 Posts	Re: ohm set-up on unlooper b4 flashing Set it to 2K Ohms and adjust the pot until it hits 0.62 for ROM10s or 0.90 for ROM11s. You may not be able to do it with your tester.

12-01-10, 09:55 PM	#3 (permalink)
kkd Junior Member Join Date: Dec 2009 Posts: 26 Thanks: 10 Thanked 0 Times in 0 Posts	Re: ohm set-up on unlooper b4 flashing If I understand u mean I shd continue to flash without setting pot 2.2kohms. But then adjust pot whlie flashing untill it hit .90 for my rom 11.

12-01-10, 10:02 PM	#4 (permalink)
blakey_8 Senior Member Join Date: Apr 2008 Location: Colne, Lancashire Posts: 6,947 Thanks: 245 Thanked 1,312 Times in 1,205 Posts	Re: ohm set-up on unlooper b4 flashing No, remove card, power and serial from the unlooper and then set it using the test points. That's the easiest and best way in my opinion.

13-01-10, 08:37 PM	#5 (permalink)
kkd Junior Member Join Date: Dec 2009 Posts: 26 Thanks: 10 Thanked 0 Times in 0 Posts	Re: ohm set-up on unlooper b4 flashing Thanx buddy for quick reply. Is it right to flash the powersync unlooper first then use vccanalyserv2 to set test points? I tried opening dx11 file in winxp but no luck. the file script is empty always. Any advice from forum or direction to tutorial for flashing unlooper. Surprising `ve search but nothing good.

13-01-10, 10:36 PM	#6 (permalink)
blakey_8 Senior Member Join Date: Apr 2008 Location: Colne, Lancashire Posts: 6,947 Thanks: 245 Thanked 1,312 Times in 1,205 Posts	Re: ohm set-up on unlooper b4 flashing I don't use VCC Analyzer anymore, I use a multimeter and the test points on the unlooper.

13-01-10, 11:37 PM	#8 (permalink)
blakey_8 Senior Member Join Date: Apr 2008 Location: Colne, Lancashire Posts: 6,947 Thanks: 245 Thanked 1,312 Times in 1,205 Posts	Re: ohm set-up on unlooper b4 flashing Yes, the two wires are what you need. Set the multimeter to 2K Ohms, put the two wires in the hole and then you should get a reading. DO NOT do this with anything plugged in, not even a card. I know I said this before but if you don't take note, you will damage the unlooper!

14-01-10, 03:51 AM	#10 (permalink)
reddiesel Super Moderator Join Date: May 2007 Location: Beds Posts: 5,615 Thanks: 175 Thanked 949 Times in 832 Posts	Re: ohm set-up on unlooper b4 flashing DX11 is the flash for the unlooper it should already be flashed you dont use winex for that, run vcc analyser in winex to set vcc although that should be set near enough also, in your copy of winex click on config and set for my unlooper it should be in the config files, try mike data script for the rom 11. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
The Layman's guide to flashing Ambit Cable Modems	cockneysean	Cable Modems	91	14-01-12 10:04 AM
Mikedata Unlooper Cant Set VCC	Smurf	Cable TV Chat	23	24-09-09 01:57 PM
Flashing Powersync Unlooper	tariqz118	Cable TV Chat	7	18-10-08 12:28 PM
Unlocking Solutions - What they do with an opinion.	Realist	Unlocking	0	18-09-05 12:38 PM