Registration complete problem! Modem reboots constantly, please help

[deadman121]

Hey guys, got a serious problem. Im in east london (leyton). Ex C&W. Had a working 2mb mac.. the furthest I got and now even that's stopped working? I've tried all the bpi but the furthest I get is registration complete.

I checked the event log and I get the following error:

Error E207.0 Configuration File CVC Validation Failure

please help?

I am using Haxorware rev39 on an Ambit modem.

[blakey_8]

Change your frequency to 586750000 and change the BPI to DOCSIS 1.0.

[deadman121]

Originally Posted by blakey_8

Change your frequency to 586750000 and change the BPI to DOCSIS 1.0.

I've tried, and using my subbed modem I've found that the frequency it uses now is 314750000, should I use that or stick to the 587 one? Because if I do use that it doesn't seem to be using it anymore, it skips onto secondary frequency I think? But same problem either frequency and same problem with all BPI.

Any chance you could sort me out with working settings? Or something please? Like a print screen of each page? Would be great!

[bobleeds]

im having the same problem in leeds, tried many macs and reboots every 30 seconds when bpi disabled

but when i enable 1.0 or 1.1 it gets ip etc but halts on registration complete...............

[deadman121]

what modem u usin bobleeds?

[blakey_8]

Originally Posted by deadman121

I've tried, and using my subbed modem I've found that the frequency it uses now is 314750000, should I use that or stick to the 587 one? Because if I do use that it doesn't seem to be using it anymore, it skips onto secondary frequency I think? But same problem either frequency and same problem with all BPI.

Any chance you could sort me out with working settings? Or something please? Like a print screen of each page? Would be great!

Use the 586750000 frequency as this is a DOCSIS 1.0 frequency.

[deadman121]

I have, still doesnt work :/

[blakey_8]

Reset your modem to factory settings (Haxorware factory settings) and start from scratch again. Only enter one frequency, in the top box and leave the upstream channel box at 0 as the modem will find it itself once it has locked to a downstream channel.

[deadman121]

Didnt work neither, keeps getting stuck on Registration completed

[nufc126]

if i Reset my modem to factory settings do u have 2 flash the modem again as iv got the same going on with my ambit 255 in newcastle area and if i update the Haxorware is it just the matter ov going 2 the Haxorware page and update it like that never done it before as never had no prob with it before and its runnng a old Haxorware