ambit with haxo on

[funkyfones]

should be fine, give it a go, wont break it

[topcat1]

hi guys been trying now for 3 days i get the modem 2 ip complete then it goes back 2 scanning????????????????????????

[funkyfones]

is it through a router? change mac on router

[hackernewbie]

Originally Posted by topcat1

you have 2 use the 250 config mate but the guy i got mine off put a password on them and no its not infinite and setvalue,need them reflashing with haxo mate!!!

i have re-flashed a 250 from infinite to haxo rev39 but now im stuck it has seemed to have killed the modem i cnt connect 192.168.100.1
and when i try to flash it again it doesnt respond i mite write new bootloader <-- havnt tried yet

any1 ever had this problem..

[topcat1]

no its not through a router mate!!thanks

[funkyfones]

Originally Posted by hackernewbie

i have re-flashed a 250 from infinite to haxo rev39 but now im stuck it has seemed to have killed the modem i cnt connect 192.168.100.1
and when i try to flash it again it doesnt respond i mite write new bootloader <-- havnt tried yet

any1 ever had this problem..

did you flash through web gui or max232? I'v only ever flashed through 232, never had problem, some ppl saying they'v had issues through web gui

[topcat1]

Originally Posted by ant16151189

you put your mac on hfc mac

and usb mac is the same as hfc mac except the last letter/number add 1 to it.


for example the hfc mac ends in 50

usb mac would be 51

thanks

just want 2 say i got a mac off a psp the other day, when i scanned for network connections on the first page it connected it had a mac adddress which i wrote down,i then went into 192.168.100.1 and it took me 2 the vermin page with another mac address,which i wrote down,it also had a bssid number which i also wrote down,the first mac turned out to be the usb mac the second turned out as the hfc mac and the bssid was the serial number,so i put the hfc mac in the top box,put the hfc number but changed the last number in the second box,put the usb mac in the third box and put the bssid numbers in the serial number box ,hey presto it worked, was on hax rev 39!!!