sb5100 modem bandwidth problem

[vermin]

I've got a problem with an sb5100 now. I've already enabled BPI version 0. I've now tried endless macs from different UBRs too, each time changing NIC MAC etc, but i get either DHCP NO OFFER or BANDWIDTH REQUEST FAILURE. Here is the telnet log:-


Quote:
Welcome to the Broadcom CLI (command-line interpreter).
To access the native VxWorks shell, type 'shell'.
DHCPc: Sending Discover packet; client id htype=1, value=00:xx:xx:xx:63:0c
CM> DHCPc: Received an Offer from DHCP server 00:1d:xx:xx:94:05 (10.153.40.1);
lease client id htype=1, value=00:xx:xx:xx:63:0c
CM> DHCPc: Timed out waiting for offers for lease with client id htype=1, value
=00:xx:xx:xx:63:0c
DHCPc: Sending Request packet; client id htype=1, value=00:xx:xx:xx:63:0c
DHCPc: Received an Ack from DHCP server 00:1d:xx:xx:94:05 (10.153.40.1); lease
client id htype=1, value=00:xx:xx:xx:63:0c
Current IP address is default 169.0.0.1; removing existing route...
0x00003a34 ['DHCP Client Thread' id=0x807c8fa0] BcmVxIpHalIf::ConfigureLeaseImpl
: (IP Stack1 HalIf)
Configuring IP stack 1:
IP Address = 10.165.232.14
Subnet Mask = 255.255.248.0
Router = 10.165.232.1

DHCP completed successfully!

DHCP Settings:
Client Id = htype=1, value=00:xx:xx:xx:63:0c
State = Bound (4)
Static Lease = false
AutoConfig Mode = IP, Subnet and Router
XID = 0x76e9
Number of Tries = 0
Max Discover Tries = 6
Max Request Tries = 6
DHCP server MAC addr = 00:1d:xx:xx:94:05
My offered IP address = 10.165.232.14
(1) Subnet Mask = 255.255.248.0
(3) Router IP address = 10.165.232.1
(54) DHCP Server IP address = 62.30.240.178
(82) Relay Agent IP address = 10.153.40.1
TFTP Server IP address = 10.137.103.3
CM Configuration file = 'O2dca0c66f155ea3c.cm'
(2) UTC Time Offset = 0 seconds
(4) Time Server IP address = 62.30.240.178
(7) Log Server IP address =
(51) Lease time = 3600 seconds
(58) T1 (renew) = 1800 seconds
(59) T2 (rebind) = 3150 seconds
Lease is infinite = false


CmSnmpAgent::IpAddressAcquiredEvent for SB5100 CM Agent
IP addr = 10.165.232.14
SB5100 CM Agent ConfigIp: Ip=10.165.232.14, Subnet=255.255.248.0, Gateway=10.165
.232.1
CM> Starting Time Of Day...
0x00003e26 ['CmDocsisIpThread' id=0x807c3b50] BcmDocsisTimeOfDayThread::SetTodSe
rverIpAddress: (Time Of Day Thread) ToD servers: 62.30.240.178
Connecting to ToD server 62.30.240.178...
Sending UDP ToD request to server...
Logging event: DHCP WARNING - Non-critical field invalid in response.
Logging event: D511.0 Retrieved DHCP .......... SUCCESS
v1Trap: cmTrapLog 192.168.100.1->192.168.100.10:7466, cmty="public"
CM> UTC returned by ToD server 3473445161; UTC offset 0
Current system time -> MON JAN 25 21:52:41 2010

System start time -> MON JAN 25 21:52:26 2010

Starting Tftp of configuration file...
Opening file 'O2dca0c66f155ea3c.cm' on 10.137.103.3...
tftpInit: Tftp outbound interface flag (1024)
Connected to 10.137.103.3 [69]
mode set to octet.
getting from 10.137.103.3:O2dca0c66f155ea3c.cm [octet]
tftpSend: Attempt #(1) Backoff (2) tickCount (1624) blkReply (1)
* SB5100MoD Save cmConfig O2dca0c66f155ea3c.cm (428 bytes) to RAM Memory
Tftp read ZERO bytes, may have reached end of file.
Config file was read! IP Initialization completed...
Set 1.3.6.1.2.1.69.1.2.1.2.1 to 255.255.255.255 OK.
Set 1.3.6.1.2.1.69.1.2.1.3.1 to 255.255.255.255 OK.
Set 1.3.6.1.2.1.69.1.2.1.4.1 to woofread OK.
Set 1.3.6.1.2.1.69.1.2.1.5.1 to 2 OK.
Set 1.3.6.1.2.1.69.1.2.1.6.1 to @ OK.
Set 1.3.6.1.2.1.69.1.2.1.7.1 to 4 OK.
Set 1.3.6.1.2.1.69.1.2.1.2.2 to 255.255.255.255 OK.
Set 1.3.6.1.2.1.69.1.2.1.3.2 to 255.255.255.255 OK.
Set 1.3.6.1.2.1.69.1.2.1.4.2 to woofreadwrite OK.
Set 1.3.6.1.2.1.69.1.2.1.5.2 to 3 OK.
Set 1.3.6.1.2.1.69.1.2.1.6.2 to @ OK.
Set 1.3.6.1.2.1.69.1.2.1.7.2 to 4 OK.
12 TLV-11's OK.
MAX CPE per CM is being set to 2
Sending a REG-REQ to the CMTS...
Time Of Day completed...
BcmSnmpAgent::SystemTimeChangeEvent for SB5100 CM Agent
Logging event: D509.0 Retrieved TFTP Config O2dca0c66f155ea3c.cm SUCCESS
v1Trap: cmTrapLog 192.168.100.1->192.168.100.10:7466, cmty="public"
Logging event: D507.0 Retrieved Time....... SUCCESS
v1Trap: cmTrapLog 192.168.100.1->192.168.100.10:7466, cmty="public"
Received a REG-RSP message from the CMTS...
0x00003fde ['CmDocsisCtlThread' id=0x807bda80] BcmCmDocsisCtlThread::RegRspMsgEv
ent: (CmDocsisCtlThread) We registered with a DOCSIS 1.0 config file!
Adding DOCSIS 1.0 CoS Settings for SID 0xcd0

Class Of Service Settings:
SID = 0xcd0
Max Us Burst = 1600 bytes
Max Us Rate = 512000 bits per second
Max Bucket size = 128000 bits
Bits In Bucket = 128000
Last Bucket Update Time = 16350 ms
Last Bucket Flush Time = 16350 ms
Packet Delay Time = 0 ms

Global CONCAT has been enabled for all upstream queues.
The CONCAT threshold is set to 2 packets (128 packets max).
Fragmentation is ENABLED in DOCSIS 1.0 mode!
Registration complete!
Process CVC
0x00003fe8 ['CmDocsisCtlThread' id=0x807bda80] BcmCmDocsisCtlThread::ProcessCVC:
(CmDocsisCtlThread) WARNING - No CVC included in config file; software upgrade
can't be performed!
0x00003fe8 ['CmDocsisCtlThread' id=0x807bda80] BcmCmDocsisCtlThread::ProcessCVC:
(CmDocsisCtlThread) ERROR - Config file does not include a CVC that validates
properly!
DOCSIS CoS/QoS rate shaping enable is now true
CmSnmpAgent::CmOperationalEvent for SB5100 CM Agent
CmSnmpAgent operating in 1.0 mode, including docsBpi, excluding docsQos
+++ No DH kickstart profiles or snmpCommunityTable entries installed.
We will operate in NMACCESS mode.
SB5100 CM Agent setting V1/V2 view to docsisNmAccessView
SB5100 CM Agent enabling management.
v1Trap: coldStartTrap 10.165.232.14->192.168.100.10:7466, cmty="public"
SB5100 CM Agent sending deferred traps...
Done w/ deferred traps.
v1Trap: linkUpTrap(if2) 192.168.100.1->192.168.100.10:7466, cmty="public"
v1Trap: linkUpTrap(if2) 10.165.232.14->192.168.100.10:7466, cmty="public"
SB5100 CPE Agent setting V1/V2 view to docsisNmAccessView
0x00003ff2 ['CmDocsisCtlThread' id=0x807bda80] BcmCmDocsisCtlThread::TestAndLaun
chBpkm: (CmDocsisCtlThread) BPKM enabled. starting BPKM key requests.
SB5100 CM Event Log sending deferred async messages...
Sending syslog message from IF 1 to 192.168.100.10:
<134> CABLEMODEM [Motorola Corporation]: <2223898630> T501.0 Acquired Downstre
am (339000000 Hz)........ SUCCESS
v1Trap: cmTrapLog 192.168.100.1->192.168.100.10:7466, cmty="public"
v1Trap: cmTrapLog 10.165.232.14->192.168.100.10:7466, cmty="public"
Sending syslog message from IF 1 to 192.168.100.10:
<130> CABLEMODEM [DOCSIS]: <82000200> No Ranging Response received - T3 time-o
ut
Sending syslog message from IF 1 to 192.168.100.10:
<134> CABLEMODEM [Motorola Corporation]: <2223898629> T500.0 Acquired Upstream
.......... SUCCESS
v1Trap: cmTrapLog 192.168.100.1->192.168.100.10:7466, cmty="public"
v1Trap: cmTrapLog 10.165.232.14->192.168.100.10:7466, cmty="public"
Sending syslog message from IF 1 to 192.168.100.10:
<130> CABLEMODEM [DOCSIS]: <68000300> DHCP WARNING - Non-critical field invali
d in response.
Sending syslog message from IF 1 to 192.168.100.10:
<134> CABLEMODEM [Motorola Corporation]: <2223898627> D511.0 Retrieved DHCP ..
........ SUCCESS
v1Trap: cmTrapLog 192.168.100.1->192.168.100.10:7466, cmty="public"
v1Trap: cmTrapLog 10.165.232.14->192.168.100.10:7466, cmty="public"
Sending syslog message from IF 1 to 192.168.100.10:
<134> CABLEMODEM [Motorola Corporation]: <2223898626> D509.0 Retrieved TFTP Co
nfig O2dca0c66f155ea3c.cm SUCCESS
v1Trap: cmTrapLog 192.168.100.1->192.168.100.10:7466, cmty="public"
v1Trap: cmTrapLog 10.165.232.14->192.168.100.10:7466, cmty="public"
Sending syslog message from IF 1 to 192.168.100.10:
<134> CABLEMODEM [Motorola Corporation]: <2223898625> D507.0 Retrieved Time...
.... SUCCESS
v1Trap: cmTrapLog 192.168.100.1->192.168.100.10:7466, cmty="public"
v1Trap: cmTrapLog 10.165.232.14->192.168.100.10:7466, cmty="public"
Done w/ deferred msgs
CM> Bandwidth request failure! Status = 0
Any ideas guys as its doing my head in. Thanks

[fnr3master]

enable bpi version 1

[vermin]

thanks fnrmaster mate. I already changed BPI from disabled to version 0.

For information purposes, may i ask what the difference is between bpi version 0 and 1??? I always thought that it means docsis 1.0 and docsis 1.1?

Also how can you tell in the log that i need version 1?

Thanks

[sparky52]

part of a txt file captured as modem booted..

(HalIf) Running IGMP in DOCSIS 1.0 mode!

sparky

[vermin]

sorry sparky, was that comment about my log file? if so where in the log file?

Also according to fnrmaster he says that i need to enable bpi to version 1, yet the log shows that its docsis 1.0:-

ent: (CmDocsisCtlThread) We registered with a DOCSIS 1.0 config file!
Adding DOCSIS 1.0 CoS Settings for SID 0xcd0

Class Of Service Settings:
SID = 0xcd0
Max Us Burst = 1600 bytes
Max Us Rate = 512000 bits per second
Max Bucket size = 128000 bits
Bits In Bucket = 128000
Last Bucket Update Time = 16350 ms
Last Bucket Flush Time = 16350 ms
Packet Delay Time = 0 ms

Global CONCAT has been enabled for all upstream queues.
The CONCAT threshold is set to 2 packets (128 packets max).
Fragmentation is ENABLED in DOCSIS 1.0 mode!

Lastly, what is the difference between bpi version 0 and version 1?

[G77]

you need to use the right mac for the freq and bpi version!

docsis 1.1 mac + bpi + docsis 1.0 freq = bad

docsis 1.0 mac + bpi+ + docsis 1.0 freq = bad

docsis 1.0 mac + bpi + docsis 1.1 freq = bad

docsis 1.0 mac + bpi + docsis 1.0 freq = good.

[vermin]

Originally Posted by G77

you need to use the right mac for the freq and bpi version!

docsis 1.1 mac + bpi + docsis 1.0 freq = bad

docsis 1.0 mac + bpi+ + docsis 1.0 freq = bad

docsis 1.0 mac + bpi + docsis 1.1 freq = bad

docsis 1.0 mac + bpi + docsis 1.0 freq = good.

Thanks G77, i'm from TW area, so how do i figure out what macs are what docsis/bpi/freq? What info would show in the telnet log file for different macs?

[fnr3master]

Originally Posted by vermin

thanks fnrmaster mate. I already changed BPI from disabled to version 0.

For information purposes, may i ask what the difference is between bpi version 0 and 1??? I always thought that it means docsis 1.0 and docsis 1.1?

Also how can you tell in the log that i need version 1?

Thanks

m8 you say you have changed the bpi to version 0 you need to change it to version 1.

stop scanning frequency
----------------------------------
cd /d
scan_stop
or
cd /cm

scan_stop

enable bpi+
-------------------
cd /n/d
enable bpi true
bpi_version 1
write
-------------------
disable bpi+
-------------------
cd /n/d
enable bpi true
bpi_version 0

write

[fnr3master]

ive got docsis 1.0 macs working with bpi+ enabled as we speak just to test out.

wot firmware have you got on ur sb5100. i will try and flash the same here and see wot works, if you have the gear to flash then let me know i will just send you a 2meg dump.

[vermin]

hi fnr3master mate,

what are are you in? I'm in TW. My sb5100 has already got the latest 1.0.4 beta sb5100mod firmware on it.

Can you pls clarify mate if i also need to enable docsis 1.1? if so, how?