dbox 2 sagem down!!!!

[erlupo]

i wish somebody can help me! this morning i went to switch on my box and nothing appear on the screen, tv do not receive any signal from the box , i checked all connection everything it was ok box seems to be dead not responding at all to any impulse the only thing on is the front lcd screen with couple of lines on it, i tried to connect with the pc but no response from the box.Do somebody have an idea what it can be? there is any internal button that i can reset the box and try to mount another image?
thanks for the help .

[humforce]

Originally Posted by erlupo

i wish somebody can help me! this morning i went to switch on my box and nothing appear on the screen, tv do not receive any signal from the box , i checked all connection everything it was ok box seems to be dead not responding at all to any impulse the only thing on is the front lcd screen with couple of lines on it, i tried to connect with the pc but no response from the box.Do somebody have an idea what it can be? there is any internal button that i can reset the box and try to mount another image?
thanks for the help .

try with ifa to load your image

[erlupo]

Originally Posted by humforce

try with ifa to load your image

done it but ifa waitin for box reply after a minute it says connection not possible

[quavis]

interesting.... so has ifa worked and is the box starting up ok?

u cud with power on press and hold the up button and power button together,,,release the pwoer button after 5 seconds but continue to hold the up button.

then after another 10 seconds holding the up button release and pull the plug on the box.

this kind of resets the box,,, but doesnt remove anything like the image etc just helps the box to restart properly.

now plug it back in and see how far it gets ,,, if it boots to a working image then thats good,, if it stalls around the lade stage (on lcd) or before that then flash again with ifa as normal and do the usual if it flashes correctly.
if the flash doesnt complete repeat the above.

if this fails over and over then theres probably a hardware fault. sell it for spares on the bay.

if the box fails to boot after the reset and wont flash then bay it.

regards dave

[quavis]

Originally Posted by erlupo

done it but ifa waitin for box reply after a minute it says connection not possible

what do you mean by connection not possible ? do you mean ftp software or similar?

regards dave

[erlupo]

anybody can send me the hyper terminal procedure with the relative file ? it seems that the box comunicate with hyperterinal but i don't know which file to send to to it please help

[erlupo]

Originally Posted by quavis

what do you mean by connection not possible ? do you mean ftp software or similar?

regards dave

i tried ifa e not communication between the box and the pc i m trying now hyper terminal null modem and it sees there is communication between them just i don't which file to send to the box.

[humforce]

Originally Posted by erlupo

i tried ifa e not communication between the box and the pc i m trying now hyper terminal null modem and it sees there is communication between them just i don't which file to send to the box.

there are two files you send via serial method {u-boot.mot then bit further on you send the image file}

[erlupo]

Originally Posted by humforce

there are two files you send via serial method {u-boot.mot then bit further on you send the image file}

thanks sorted it back !!!!
i used manual procedure hyperterminal imageis back now go not channel when i scan but looking around this should be not a probelm but any suggestion is welcome

[bootsboy]

hi, i have got a box doing what yours was doing. how do you use the serial method to fix