Stealth..............

[gazwhittle]

i know a few people are having trouble getting online and i saw stealth option in hax mentioned a few times..


ive just checked mine and i think its wrong.....

im running a ambit 256 on hax 1.1 rev39

but the steal settings are:


Vendor : Motorola Corporation
Model : SB5101
Software Version: SB5101-2.7.6.0-GA-00-NOSH


surely this isnt right?? could this be the cause to me 1/4 mb macs from a list of 30 macs i know that worked before the bpi change?

[funkyfones]

hax always starts off with these unless you change manually, if you know the mac is off a certain make or model then input those otherwise leave it and try

[gazwhittle]

Originally Posted by funkyfones

hax always starts off with these unless you change manually, if you know the mac is off a certain make or model then input those otherwise leave it and try

well the list of macs that used to work dont anyway the are all 1/4mb speeds

[funkyfones]

maybe they'v added some sort of check to match macs and the modem it should look like, other than either cert or bpi

have you tried the nonvol settings from here? also if you look at the cfg file you'l see the stealth is for an ambit

[gazwhittle]

Originally Posted by funkyfones

maybe they'v added some sort of check to match macs and the modem it should look like, other than either cert or bpi

have you tried the nonvol settings from here? also if you look at the cfg file you'l see the stealth is for an ambit

my configs are all dynamic mate....

[funkyfones]

no, the .cfg file you upload to the modem, it contains stealth settings and ticks/unticks certain boxes

[gazwhittle]

Originally Posted by funkyfones

no, the .cfg file you upload to the modem, it contains stealth settings and ticks/unticks certain boxes

youve lost me lol

[funkyfones]

hang on I'l copy paste the contents of the cfg file, maybe that'l help..



[WebGUI]
Authentication = 'false'
Username = 'admin'
Password = 'admin'
[Telnet]
Enable = 'true'
Username = 'admin'
Password = 'admin'
[Settings]
CertType = '0'
DisableSwDload = 'true'
ForceNetAccess = 'false'
TftpEnforceBypass = 'false'
IgnoreMgmntMsgs = 'true'
DisableIPFilters = 'false'
BpiPlusBypass = 'false'
[Spoof]
OverrideHardwareRev = 'false'
HardwareRev = '119'
OverrideBootRev = 'true'
BootRev = '3.1.6d'
Model = 'E08C007'
Vendor = 'AMBIT'
Version = '2.94.1015'
[SNMP]
Port = '161'
SuspendAfterReg = 'true'
RedirectTraps = 'true'
TrapIP = '127.0.0.1'
TrapPort = '162'


basically it puts all those settings in automatically.

[gazwhittle]

so how do i go about changing it to ambit as i no most people who have legit lines all have ambits.......

[funkyfones]

in haxor go to file manager-> restore from file, select the haxorware.cfg file, upload and its done, check all settings after that