Anyone else having this problem??

[hitman000]

Hi im not sure if anyone can help, i tried this over at WM forums and got no reply. Im online with a 20mb mac but every hour or so the modem goes off scanning then back to operational again.

This is my hax config

Factory Mode - Unchecked
Disable Firmware Upgrades - Checked
Force Network Access - Checked
Tftp Enforce Bypass - Checked
Disable IP Filters on startup - Checked

DHCP Enabled

Annex - Both
Plan - Euro
Preferred DS Freq 1 402750000 Hz
Preferred DS Freq 2 331000000 Hz
Upstream Chan - 2

HFC MAC - 20Mb
Ethernet MAC - Spoofed
USB MAC - HFC + 1
Serial Number - HFC

Config Options - Blank

BPI - 1.0

This is what i get in the event log everytime it goes off..

2010-02-04 19:35:22 Critical D003.0 DHCP WARNING - Non-critical field invalid in response.
2010-02-04 19:35:10 Notice M572.0 Rng Rsp Abort Status - Reinitialize MAC...
2010-02-04 19:35:10 Critical R007.0 Unicast Ranging Received Abort Response - Re- initializing MAC

Just wondering if its a setting thats wrong or something.

Any help would be greatly appreciated.

I also have a telnet log of when this happens if anyone needs to see it.

Thanks

[ste0ey]

dont know if it will make any difference but this is what i have different from yours and it works ok, ecxept for the fact it reboots itself once every afternoon then is ok then till next day

Disable IP Filters on startup - Checked

i have this unchecked

Ethernet MAC - Spoofed

i dont touch this

BPI - 1.0

i use bpi+1.1 for a 20meg mac

[River-Rat]

Tftp Enforce Bypass - Checked we was all told to untick? but some areas are working if ur forcing a mac

[hitman000]

Originally Posted by ste0ey

dont know if it will make any difference but this is what i have different from yours and it works ok, ecxept for the fact it reboots itself once every afternoon then is ok then till next day

i have this unchecked

i dont touch this


i use bpi+1.1 for a 20meg mac

Thanks for the reply ste0ey i have changed the settings now so fingers crossed lol, in the overview page i get this...

Name Dynamic
Size 416 bytes
Compliance DOCSIS 1.0

even tho its set to 1.1 & was the same at 1.0 is that right?

I'll keep a eye on my event log and report back if all is well.

Cheers

[hitman000]

2010-02-06 15:47:04 Critical D003.0 DHCP WARNING - Non-critical field invalid in response.
2010-02-06 15:46:49 Notice M572.0 Rng Rsp Abort Status - Reinitialize MAC...
2010-02-06 15:46:49 Critical R007.0 Unicast Ranging Received Abort Response - Re- initializing MAC

Still getting the same thing with the changed settings im afraid, my MAC is a 00D0 mac, could that be the problem, im in the teesside area, im not complaining because it works lol but its just bugging me.

Cheers

[Robbie1990]

i'm teeside also. 00:0D mac 20mb runing docsis 1.0 no trouble at all now

[hitman000]

Originally Posted by Robbie1990

i'm teeside also. 00:0D mac 20mb runing docsis 1.0 no trouble at all now

The only thing i havent tried is setting tftp enforce bypass unticked, can you tell me what settings your using?

cheers

[funkyfones]

mines ticked and its working ok on 20

[alboking_uk]

mine is ticked as well and workin fine on 00:02 mac

[hitman000]

CM> BcmCmDocsisStatusEventCodes::kCmIsNotOperational
CamDeleteAddress: Deleted address from cam segment 0
CamDeleteAddress: Deleted address from cam segment 0
Non-Vol Settings successfully written to the device.

@@@@@ In ResetRngState, fRemainingInitRngPowerSteps 17

mot_scanList: Setting override freq @ 331000000
Scanning DS Channel at 331000000 Hz... (Initial target freq)

******************************************
DOWNSTREAM STATUS
******************************************
Tuner Frequency = 331000000 Hz
Carrier Offset = -14 Hz
Symbol rate = 5360537 sym/sec
SNR = 37 dB
QAM Mode = QAM256
Tuner AGC = 0xfff00000
IF AGC = 0x13cd3df3
Power Level = 7 dB
QAM = LOCKED
FEC = LOCKED
******************************************

CM> Selecting UCD for Us Channel 2

RNG-RSP Adj: tim=1172 power=0 freq=0 Stat=Continue
RNG-RSP Adj: tim=0 power=0 freq=0 Stat=Success

******************************************
UPSTREAM STATUS
******************************************
Upstream Status = UP
Upstream Channel = 2
Upstream Frequency = 37500000 Hz
Upstream Power = 44 dBmV
Ranging SID = 0x35f
Upstream Symbol Rate = 2560000 sym/sec
******************************************

Starting IP Initialization with DHCP...
CM> ARPing for default GW IP = 10.37.76.1
MAC = 00:1b:8f:e9:c4:01
DHCP completed successfully!
DHCP: IP address = 10.37.78.162

Starting Time Of Day...
Current system time -> Fri Feb 05 01:02:24 2010

System start time -> Thu Feb 04 20:07:58 2010

Starting Tftp of configuration file...
Resuming SNMP Thread
tftp-enforce bypass is using 10.37.76.1:4ncxv9873254k;fg87ds
Initiating fake TFTP Get (tftp-enforce bypass)
Bypass succeeded.File was 416 bytes
Storing received cfg of size 416 to memory
TLV-11[1]: 1.3.6.1.2.1.69.1.2.1.2.1 -> 255.255.255.255
TLV-11[2]: 1.3.6.1.2.1.69.1.2.1.3.1 -> 255.255.255.255
TLV-11[3]: 1.3.6.1.2.1.69.1.2.1.4.1 -> woofread
TLV-11[4]: 1.3.6.1.2.1.69.1.2.1.5.1 -> 2 (i32)
TLV-11[5]: 1.3.6.1.2.1.69.1.2.1.6.1 -> @
TLV-11[6]: 1.3.6.1.2.1.69.1.2.1.7.1 -> 4 (i32)
TLV-11[7]: 1.3.6.1.2.1.69.1.2.1.2.2 -> 255.255.255.255
TLV-11[8]: 1.3.6.1.2.1.69.1.2.1.3.2 -> 255.255.255.255
TLV-11[9]: 1.3.6.1.2.1.69.1.2.1.4.2 -> woofreadwrite
TLV-11[10]: 1.3.6.1.2.1.69.1.2.1.5.2 -> 3 (i32)
TLV-11[11]: 1.3.6.1.2.1.69.1.2.1.6.2 -> @
TLV-11[12]: 1.3.6.1.2.1.69.1.2.1.7.2 -> 4 (i32)
Time Of Day completed...
SB5101 CM Agent w/ BRCM Factory Support processing TLV-11's
SNMP packet sent to 10.37.78.162:225
12 TLV-11's OK.
BPI initialization completed. Calling ConfigOperational().
Enabling network access for all CPE ports.

mot_scanList: Writing to Flash!
BcmCmDocsisStatusEventCodes::kCmIsOperational
Suspending SNMP Thread


Thats my telnet log when it happens, i cant understand why its doing it, i have tried loads of different settings and its still the same lol.

Cheers