0% Quality and Level Signals on Some Transponders in AB IPBOX900HD - Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums

matin_vv · 20-02-10, 02:12 PM

Hello everyone,
First of all, I'm a newbie, so please bear with me.

Currently I've got an Ipbox 900 HD satellite reciever. I set everything up except I have zero signals on some 7west (nilesat) transponders; and consequently, there are some channels my device cannot find. Meanwhile my old receiver finds the channels on these transponders easily without any specific configuration.
There are some parameters which I don't really know what they are in installation page, such as Tone burst, Disecq Parameter, Swap Commands, Repeat Times, Sequence repeat and uncommitted switch. I have a 4-1 Disecq 2 switch and I use 3 of the ports for recieving w3, Hotbird, and Nilesat.
The question is: does the problem come from maladjustment of these mentioned parameters? cause I'm 100% sure that my dish is well positioned.
I learned to turn "swap commands" & "LNB Sequence" on and "uncommitted switch" value to 1. Is there anything else I should do?
Please help me, I'm going to get crazy!

Yorks · 20-02-10, 02:22 PM

If you are certain that your dish is correctly positioned and you have the strongest signal you can get, then try deleting and rescanning the channels/transponders which you are receiving no signal from.

20-02-10, 02:12 PM	#1 (permalink)
matin_vv Junior Member Join Date: Feb 2010 Posts: 1 Thanks: 0 Thanked 0 Times in 0 Posts	0% Quality and Level Signals on Some Transponders in AB IPBOX900HD Hello everyone, First of all, I'm a newbie, so please bear with me. Currently I've got an Ipbox 900 HD satellite reciever. I set everything up except I have zero signals on some 7west (nilesat) transponders; and consequently, there are some channels my device cannot find. Meanwhile my old receiver finds the channels on these transponders easily without any specific configuration. There are some parameters which I don't really know what they are in installation page, such as Tone burst, Disecq Parameter, Swap Commands, Repeat Times, Sequence repeat and uncommitted switch. I have a 4-1 Disecq 2 switch and I use 3 of the ports for recieving w3, Hotbird, and Nilesat. The question is: does the problem come from maladjustment of these mentioned parameters? cause I'm 100% sure that my dish is well positioned. I learned to turn "swap commands" & "LNB Sequence" on and "uncommitted switch" value to 1. Is there anything else I should do? Please help me, I'm going to get crazy!

20-02-10, 02:22 PM	#2 (permalink)
Yorks Nook in footer Join Date: May 2006 Location: S. Yorks Posts: 1,760 Thanks: 12 Thanked 129 Times in 108 Posts	Re: 0% Quality and Level Signals on Some Transponders in AB IPBOX900HD If you are certain that your dish is correctly positioned and you have the strongest signal you can get, then try deleting and rescanning the channels/transponders which you are receiving no signal from. __________________ They're coming to take me away haha TM1500CI, 53E to 61W

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Astra 28E Problem	jontydog	Satellite Help	30	05-10-09 06:52 PM
quality and channel level	mrwolves	Eurovox	5	03-11-08 09:42 AM
0% signal quality on some 19E transponders	SAT-WORLD	Satellite Help	5	13-07-08 03:28 PM
Level 95% but quality 5% max, why????	tottenham1984	Satellite Help	6	21-06-08 01:14 AM
Signal Level & Quality	p harrison	Satellite Help	9	27-12-07 09:19 AM