net id with funcard? - Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums

elli5on · 23-02-10, 09:14 PM

Alright folks, i have been reading about but not really getting anywhere to be honest, now i have downloaded netIDv2.1, i have a di4010 in pure, this box was done about 5 months ago and was working fine ( i seen it myself).

The box is still on 3_6 software, re done card with shani hex but it just stays on tune and nothing appears to be happening. Ive pulled the red jumper and tried again without success. I then booted into the engineers menu to have a look, the net id is simply *****! Now im trying to set a net id using the funcard, but reading the readme file withing netid v2.1 it says to copy files into wordpad etc etc. But im kinda stuck. I just used infinity software, erased card, wrote exteep, inteep which i created with netidv2.1 and wrote flash (shani) but still nothing happening.

Any help appreciated

Regards

jimbo · 23-02-10, 11:31 PM

a 4010 in a pure area dont need reset hex it resets itself.

River-Rat · 23-02-10, 11:40 PM

as far as i know shani is only for 3.7

see my post in other boxes

sr20 · 24-02-10, 02:59 AM

Quote:

Originally Posted by jimbo

a 4010 in a pure area dont need reset hex it resets itself.

Yeah, you have some sort of tuner / related caps fault.. no need to set the NETID directly, fix the signal.

elli5on · 24-02-10, 08:49 AM

The siganl is fine, im using another box which works perfectly fine. The shani fix will work, my area is on 3_7, box is just on 3_6 and wont update at all.

sr20 · 24-02-10, 09:30 AM

Quote:

Originally Posted by elli5on

The siganl is fine, im using another box which works perfectly fine. The shani fix will work, my area is on 3_7, box is just on 3_6 and wont update at all.

I mean fix the signal in the box, not the feed.

What does the signal look like in the eng menu?

Set the right freq to match working box and signal level should look the same, regardless of whether the NETID is correct.

jimbo · 24-02-10, 10:32 AM

power of box open it remove red jumper wait a min put back on connect to direct feed power on box and see if it srolls and updates dont turn off until u see 999 then try shani 3_7 fix.

elli5on · 24-02-10, 06:42 PM

Signal in eng menu says good, the frequency is set to 643 i believe, is this correct? ive pulled red jumper and left out overnight by the way. re connected feed and still stuck in tune.

Regards

sr20 · 24-02-10, 10:49 PM

Quote:

Originally Posted by elli5on

Signal in eng menu says good, the frequency is set to 643 i believe, is this correct? ive pulled red jumper and left out overnight by the way. re connected feed and still stuck in tune.

Regards

Box itself is fkd, which is why stuck in tune. There's no guide for 4010's so you'll be working blind.

On DVB DEMOD page of eng menu, what is:
Tuner AGC
IF AGC
SNR estimate
Lock status?

lambo · 24-02-10, 11:00 PM

i agree with sr20 box is fkd there are some stuck on tune guides about but none have ever worked for me.

23-02-10, 09:14 PM	#1 (permalink)
elli5on Senior Member Join Date: Jan 2009 Posts: 390 Thanks: 54 Thanked 66 Times in 62 Posts	net id with funcard? Alright folks, i have been reading about but not really getting anywhere to be honest, now i have downloaded netIDv2.1, i have a di4010 in pure, this box was done about 5 months ago and was working fine ( i seen it myself). The box is still on 3_6 software, re done card with shani hex but it just stays on tune and nothing appears to be happening. Ive pulled the red jumper and tried again without success. I then booted into the engineers menu to have a look, the net id is simply *****! Now im trying to set a net id using the funcard, but reading the readme file withing netid v2.1 it says to copy files into wordpad etc etc. But im kinda stuck. I just used infinity software, erased card, wrote exteep, inteep which i created with netidv2.1 and wrote flash (shani) but still nothing happening. Any help appreciated Regards

23-02-10, 11:31 PM	#2 (permalink)
jimbo Super Moderator Join Date: Aug 2007 Posts: 3,773 Thanks: 254 Thanked 891 Times in 554 Posts	Re: net id with funcard? a 4010 in a pure area dont need reset hex it resets itself. __________________ i now keep copies of some posts before they are deleted, this is a private matter.

23-02-10, 11:40 PM	#3 (permalink)
River-Rat Dogs Body Join Date: Apr 2007 Posts: 2,744 Thanks: 62 Thanked 384 Times in 281 Posts	Re: net id with funcard? as far as i know shani is only for 3.7 see my post in other boxes __________________ A wise man once said " if you don`t ask, you want get"

24-02-10, 08:49 AM	#5 (permalink)
elli5on Senior Member Join Date: Jan 2009 Posts: 390 Thanks: 54 Thanked 66 Times in 62 Posts	Re: net id with funcard? The siganl is fine, im using another box which works perfectly fine. The shani fix will work, my area is on 3_7, box is just on 3_6 and wont update at all.

24-02-10, 10:32 AM	#7 (permalink)
jimbo Super Moderator Join Date: Aug 2007 Posts: 3,773 Thanks: 254 Thanked 891 Times in 554 Posts	Re: net id with funcard? power of box open it remove red jumper wait a min put back on connect to direct feed power on box and see if it srolls and updates dont turn off until u see 999 then try shani 3_7 fix. __________________ i now keep copies of some posts before they are deleted, this is a private matter.

24-02-10, 06:42 PM	#8 (permalink)
elli5on Senior Member Join Date: Jan 2009 Posts: 390 Thanks: 54 Thanked 66 Times in 62 Posts	Re: net id with funcard? Signal in eng menu says good, the frequency is set to 643 i believe, is this correct? ive pulled red jumper and left out overnight by the way. re connected feed and still stuck in tune. Regards

24-02-10, 11:00 PM	#10 (permalink)
lambo Senior Member Join Date: Mar 2008 Location: Dublin, IRL Posts: 881 Thanks: 176 Thanked 89 Times in 83 Posts	Re: net id with funcard? i agree with sr20 box is fkd there are some stuck on tune guides about but none have ever worked for me.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
net id with a funcard	Dangerous1	Cable TV Chat	10	27-04-10 07:21 AM
New Guide :setting net id on 3.7 (funcard)	River-Rat	Other Cable Boxes	0	11-02-10 12:10 PM
Set Net ID on 2100c with funcard always problems ???	mateyboy	Cable TV Chat	33	01-12-09 11:54 PM
funcard net id files	River-Rat	Other Cable Boxes	9	16-06-09 09:59 PM
Resetting Net ID for funcard	kimigonzales	Other Cable Boxes	3	01-03-09 10:37 PM